참고문헌 (17)

1. Kang, M. C., Ye, D. H. and Go, G. H., "International Development Trend and Technical Issues of Metal Additive Manufacturing," Journal of Welding and Joining, Vol. 34, No. 4, pp. 9-16, 2016. 

2. Jang, S. G., Woo, D. G., and Kim, T. H., "Development of Motor-Driven Convenience Equipment for Harvesting Chili Peppers on Bare Ground," Journal of Biosystems Engineering, Vol. 45, No. 1, 2020. 

   상세보기

3. Song, H. S., and Kim, Y. Y., "Determination of the Properties of the Rubber Mounted Under the Agricultural Tractor Rollover Protective Structure Cabin Using a Hyperelastic Tensile Test and Finite Element Analysis," Journal of Biosystems Engineering, Vol. 45, No. 3, 2020. 

   상세보기

4. Hwang, S. J., Kim, J. H., and Nam, J. S., "Factorial Experiment for the Collecting Device of an Agricultural By-product Collector," Journal of Biosystems Engineering, Vol. 45, No. 3, 2020. 

5. Kim, B. S., Han, H. W., and Park, Y. J., "Experimental Analysis of Noise Characteristics of Electric Agricultural Utility Terrain Vehicle Gearbox," Journal of Biosystems Engineering, Vol. 45, No. 3, 2020. 

6. Saha, K. K., Hossain, A., Hoque, M. A., Jahan, M. A. H. S., Ahmed, S., and Timsina, J., "Development and Performance Evaluation of a Two-Wheeled Power-Tiller Multi-row Weeder," Journal of Biosystems Engineering, Vol. 46, No. 1, 2021. 

   상세보기

7. Shafaei, S. M., Loghavi, M., and Kamgar, S., "Analytical Description of Power Delivery Efficiency of Front Wheel Assist Tractor in Tillage Works," Journal of Biosystems Engineering, Vol. 46, No. 3, 2021. 

   상세보기

8. Koo, Y. M., and Kang, Y. S., "Characteristics of Power and Fuel Use of a Tractor-Mounted Integrated Implement for Round Ridge Preparation," Journal of Biosystems Engineering, Vol. 46, No. 4, 2021. 

   상세보기

9. Jang, S. G., Woo, D. G. and Kim, T. H., "Development of Motor-Driven Convenience Equipment for Harvesting Chili Peppers on Bare Ground," Journal of Biosystems Engineering, Vol. 45, No. 1, 2020. 

   상세보기

10. Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E. and Sing, S. L., "Review of Selective Laser Melting: Materials and Applications," Applied Physics Review, Vol. 2, No. 4, 2015. 

11. Sander, G., Babu, A. P., Gao, X., Jiang, D. and Birbilis, N., "On the Effect of Build Orientation and Residual Stress on the Corrosion of 316L Stainless Steel Prepared by Selective Laser Melting," Corrosion Science, Vol. 179, 2021. 

    상세보기

12. Song, Y., Sun, Q., Guo, K., Wang, X., Liu, J. and Sun, J., "Effect of Scanning Strategies on the Microstructure and Mechanical Behavior of 316L Stainless Steel Fabricated by Selective Laser Melting," Materials Science and Engineering: A, Vol. 793, 2020. 

    상세보기

13. Maass, R., Van Petegem,. S., Grolimund, D. and Van Swygenhoven, H., "A Strong Micropillar Containing a Low Angle Grain Boundary," Applied Physics Letters, Vol. 91, No. 13, 2007. 

    상세보기

14. Bruno, J., Rochman, A. and Cassar, G., "Effect of Build Orientation of Electron Beam Melting on Microstructure and Mechanical Properties of Yi-6Al-4V," Journal of Materials Engineering and Performance, Vol. 26, pp. 692-703, 2017. 

15. Razavi, S. M. J., Van Hooreweder, B. and Berto, F., "Effect of Build Thickness and Geometry on Quasi-static and Fatigue Behavior of Ti-6Al-4V Produced by Electron Beam Melting," Additive Manufacturing, Vol. 36, 2020. 

16. Neikter, M., Akerfeldt, P., Pederson, R. and Antti, M. L., "Microstructure Characterisation of Ti-6Al-4V from Different Additive Manufacturing Processes," IOP Conference Series: Materials Science and Engineering, Vol. 258, 2017. 

17. Zhang, C., Hu, K., Zheng, M., Zhu, W. and Song, G., "Effect of Surface Nanocrystallization on Fatigue Properties of Ti-6Al-4V Alloys with Bimodal and Lamellar Structure," Materials Science & Engineering A, Vol. 813, 2021. 

    상세보기