최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.21 no.7, 2022년, pp.10 - 20
황인석 (충북대학교 바이오시스템공학과) , 신창섭 (충북대학교 바이오시스템공학과)
Recently, metal additive manufacturing (AM) is being investigated as a new manufacturing technology. In metal AM, powder bed fusion (PBF) is a promising technology that can be used to manufacture small and complex metallic components by selectively fusing each powder layer using an energy source suc...
Kang, M. C., Ye, D. H. and Go, G. H., "International Development Trend and Technical Issues of Metal Additive Manufacturing," Journal of Welding and Joining, Vol. 34, No. 4, pp. 9-16, 2016.
Jang, S. G., Woo, D. G., and Kim, T. H., "Development of Motor-Driven Convenience Equipment for Harvesting Chili Peppers on Bare Ground," Journal of Biosystems Engineering, Vol. 45, No. 1, 2020.
Song, H. S., and Kim, Y. Y., "Determination of the Properties of the Rubber Mounted Under the Agricultural Tractor Rollover Protective Structure Cabin Using a Hyperelastic Tensile Test and Finite Element Analysis," Journal of Biosystems Engineering, Vol. 45, No. 3, 2020.
Hwang, S. J., Kim, J. H., and Nam, J. S., "Factorial Experiment for the Collecting Device of an Agricultural By-product Collector," Journal of Biosystems Engineering, Vol. 45, No. 3, 2020.
Kim, B. S., Han, H. W., and Park, Y. J., "Experimental Analysis of Noise Characteristics of Electric Agricultural Utility Terrain Vehicle Gearbox," Journal of Biosystems Engineering, Vol. 45, No. 3, 2020.
Saha, K. K., Hossain, A., Hoque, M. A., Jahan, M. A. H. S., Ahmed, S., and Timsina, J., "Development and Performance Evaluation of a Two-Wheeled Power-Tiller Multi-row Weeder," Journal of Biosystems Engineering, Vol. 46, No. 1, 2021.
Shafaei, S. M., Loghavi, M., and Kamgar, S., "Analytical Description of Power Delivery Efficiency of Front Wheel Assist Tractor in Tillage Works," Journal of Biosystems Engineering, Vol. 46, No. 3, 2021.
Koo, Y. M., and Kang, Y. S., "Characteristics of Power and Fuel Use of a Tractor-Mounted Integrated Implement for Round Ridge Preparation," Journal of Biosystems Engineering, Vol. 46, No. 4, 2021.
Jang, S. G., Woo, D. G. and Kim, T. H., "Development of Motor-Driven Convenience Equipment for Harvesting Chili Peppers on Bare Ground," Journal of Biosystems Engineering, Vol. 45, No. 1, 2020.
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E. and Sing, S. L., "Review of Selective Laser Melting: Materials and Applications," Applied Physics Review, Vol. 2, No. 4, 2015.
Sander, G., Babu, A. P., Gao, X., Jiang, D. and Birbilis, N., "On the Effect of Build Orientation and Residual Stress on the Corrosion of 316L Stainless Steel Prepared by Selective Laser Melting," Corrosion Science, Vol. 179, 2021.
Song, Y., Sun, Q., Guo, K., Wang, X., Liu, J. and Sun, J., "Effect of Scanning Strategies on the Microstructure and Mechanical Behavior of 316L Stainless Steel Fabricated by Selective Laser Melting," Materials Science and Engineering: A, Vol. 793, 2020.
Maass, R., Van Petegem,. S., Grolimund, D. and Van Swygenhoven, H., "A Strong Micropillar Containing a Low Angle Grain Boundary," Applied Physics Letters, Vol. 91, No. 13, 2007.
Bruno, J., Rochman, A. and Cassar, G., "Effect of Build Orientation of Electron Beam Melting on Microstructure and Mechanical Properties of Yi-6Al-4V," Journal of Materials Engineering and Performance, Vol. 26, pp. 692-703, 2017.
Razavi, S. M. J., Van Hooreweder, B. and Berto, F., "Effect of Build Thickness and Geometry on Quasi-static and Fatigue Behavior of Ti-6Al-4V Produced by Electron Beam Melting," Additive Manufacturing, Vol. 36, 2020.
Neikter, M., Akerfeldt, P., Pederson, R. and Antti, M. L., "Microstructure Characterisation of Ti-6Al-4V from Different Additive Manufacturing Processes," IOP Conference Series: Materials Science and Engineering, Vol. 258, 2017.
Zhang, C., Hu, K., Zheng, M., Zhu, W. and Song, G., "Effect of Surface Nanocrystallization on Fatigue Properties of Ti-6Al-4V Alloys with Bimodal and Lamellar Structure," Materials Science & Engineering A, Vol. 813, 2021.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.