참고문헌 (20)

1. Autodyn, ANSYS (2005) Theory Manual Revision 4.3., Century Dynamics, Concord, CA. 

2. Center, P.D. (2008) Single Degree of Freedom Structural Response Limits for Anti-Terrorism Design, PDC TR-06-08, Omaha, NE: US Army Corps of Engineers. 

3. Dalton, J., Gott, J., Parker, P., McAndrew, M., Bowling, C. (2008) Unified Facilities Criteria: Structures to Resist the Effects of Accidental Explosions(UFC 3-340-02), US Department of Defense, Washington, DC. 

4. Department of the Army (1959) Design of structures to Resist of the Effects of Atomic Weapons: Weapons Effects Data, Army Technical Manual(TM 5-856-1). Washington, DC: Dept. of the Army. 

5. Dobratz, B.M., Crawford, P.C. (1985) LLNL Explosive Handbook, Properties of Chemical Explosives and Explosive Simulants, Rep. No.UCRL-52997. Livermore, CA: Lawrence Livermore National Laboratory. 

6. Dragos, J., Wu, C. (2013) A New Approach to Derive Normalized Pressure Impulse Curves, Int. J. Impact Eng., 62, pp.1~12. 

   상세보기

7. Hou, X., Cao, S., Rong, Q., Zheng, W. (2018) A P-I Diagram Approach for Predicting Failure Modes of RPC One-Way Slabs Subjected to Blast Loading, Int. J. Impact Eng., 120, pp.171~184. 

   상세보기

8. Kinney, G.F., Graham, K.J. (1985) Explosive Shocks in Air, 2nd ed., Springer, New York. 

9. Liu, Y., Yan, J., Huang, F. (2018) Behavior of Reinforced Concrete Beam and Columns Subjected to Blast Loading, Def. Technol., 14(5), pp.550~559. 

   상세보기

10. Morison, C.M. (2006) Dynamic Response of Walls and Slabs by Single-Degree-of-Freedom Analysis-a Critical Review and Revision, Int. J. Impact Eng., 32(8), pp.1214~1247. 

    상세보기

11. Nartu, M .K., K um ar, M.K. (2020) Blast Response of Single-Degree-of-Freedom System Including Fluid-Structure Interaction, J. Struct. Eng., 147(1), pp.1~14. 

12. Norris, C.H., Hansen, R.J., Holley, M.J., Biggs, J. M., Namyet, S., Minami, J.K. (1959) Structural Design for Dynamic Loads, McGraw-Hill, New York. 

13. Oswald, C., Bazn, M. (2014) Comparison of SDOF Analysis Results to Test Data for Different Types of Blast Loaded Components, Structures Congress, Boston, Massachusetts, pp.117~130. 

14. Rickman, D.D., Murrell, D.W. (2007) Development of an Improved Methodology for Predicting Airblast Pressure Relief on a Directly Loaded Wall, J. Press. Vessel Technol., 129(1), pp.195~204. 

    상세보기

15. Rigby, S.E., Tyas, A., Bennett, T., Fay, S.D., Clarke, S.D., Warren, J.A. (2014) A Numerical Investigation of Blast Loading and Clearing on Small Targets, Int. J. Prot. Struct., 5(3), pp.253~274. 

    상세보기

16. Rigby, S.E., Tyas, A., Clarke, S.D., Razaqpur, G. (2017) Approach to Developing Design Charts for Quantifying the Influence of Blast Wave Clearing on Target Deformation, J. Struct. Eng., 143(1), 04016150. 

17. Shin, J., Whittaker, A.S. (2019) Blast-Wave Clearing for Detonations of High Explosives, J. Struct. Eng., 145(7), 04019049. 

18. Smith, P.D., Hetherington, J.G. (1994) Blast and Ballistic Loading of Structures, Oxford, UK: Butterworth-Heinemann. 

19. Sung, S., Chong, J. (2020) A Fast-Running Method for Blast Load Prediction Shielding by a Protective Barrier, Def. Technol., 16(2), pp.308~315. 

    상세보기

20. Tyas, A., Warren, J.A., Bennett, T., Fay, S. (2011) Prediction of Clearing Effects in Far-Field Blast Loading of Finite Targets, Shock Waves, 21(2), pp.111~119. 

    상세보기

저자의 다른 논문 :

성승훈 (4)