최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Particle and aerosol research = 한국입자에어로졸학회지, v.18 no.3, 2022년, pp.61 - 68
정혁 (에이알티플러스 기업부설연구소) , 박진수 (국립환경과학원 기후대기연구부 대기환경연구과)
In this study, a fluidized bed particle generator was developed to generate an aerosol without supply of compressed air and to increase portability. It was assumed that the mixing ratio of the test particles and beads, the input amount, and the air flow rate supplied to the generator would have effe...
국립환경과학원고시 제2019-24호, 미세먼지 간이측정기 성능인증 등에 관한 고시
국립환경과학원 (2020), 초미세먼지(PM-2.5) 간이측정기 가이드북, 부록, 23-30
R.F.Boucher and Chong Lua (1982). A stable, high-concentration, dry aerosol generator, Journal of Aerosol Science, 13(6), 499-511
Michael Roesch, Carolin Roesch, and Daniel J. Cziczo (2017), Dry particle generation with a 3-D printed fluidized bed generator, Atmospheric Measurement Techniques, 10(6), 1999-2007
Anthony J. Prenni , Ronald L. Siefert , Timothy B. Onasch, Margaret A. Tolbert and Paul J. Demott (2000), Design and Characterization of a Fluidized Bed Aerosol Generator: A Source for Dry, Submicrometer Aerosol, Aerosol Science and Technology, 32, 465-481
J.I. Corcoles, A. Acosta-Iborra, J.A. Almendros-Ibanez and C. Sobrino (2021), Numerical simulation of a 3-D gas-solid fluidized bed: Comparison of TFM and CPFD numerical approaches and experimental validation, Advanced Powder Technology, 32, 3689-3705
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.