최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Design & manufacturing, v.16 no.3, 2022년, pp.9 - 15
박시환 (울산과학대학교 기계공학부)
In order to reduce the manufacturing costs of the glass lens, it is necessary to manufacture a lens using a UV curable resin or a thermosetting resin, which is a curable material, in order to replace a glass lens. In the case of forming a lens using a thermosetting material, it is necessary to form ...
Giles H., Kidron, B. and Kriman, M., "Low Cost Through Silicon Via Solution Compatible with Existing Assembly Infrastructure and Suitable for Single Die and Die Stacked Packages," IEEE International Microsystems, Packaging, Assembly & Circuits Technology Conference, Taipei, pp. 61-64, October, 2008. DOI: https://doi.org/10.1109/EMAP.2008.4784229
Park, S.H. and Moon, J.S., ?Analysis of the shrinkage and warpage of Wafer lens during UV curing?, Journal of the Korea Academia-Industrial cooperation Society, Vol. 15:11, pp. 6464-6471, 2014. DOI: https://doi.org/10.5762/KAIS.2014.15.11.6464
Hideaki N., Masaharu F., Tomoyuki A. Daisuke M., Seiki S., Mami N. and Nobutaka I., "Thermal Stress Simulation Method in Substrate with Cure Shrinkage Reaction of Thermosetting Resin," 13th International Microsystems, Packaging, Assembly and Circuits Technology Conference (IMPACT), Taipei, Taiwan, pp. 135-138, 2018. DOI: https://doi.org/10.1109/IMPACT.2018.8625779
Park, S.H., Hwang, Y. and Kim, D.G., ?A Study on the Release Characteristics During Wafer-Level Lens Molding Using Thermosetting Materials?, Journal of Korea Academia-Industrial cooperation Society, vol. 22:1, pp. 461-467, 2021. DOI: https://doi.org/10.5762/KAIS.2021.22.1.461
ASTM D2566 "Standard test method for linear shrinkage of cured thermosettings casting resins during cure", 1986.
Zhang, J., Xu, Y.C. and Hunag P., ?Effect of cure cycle on curing process and hardness for epoxy resin?, eXPRESS Polymer Letters Vol. 3:9, pp. 534-541, 2009. DOI: 10.3144/expresspolymlett.2009.67
Pingsheng, H., Zhiqiang, Z. and Caiyuan, P. ?An epoxy resin copolymer with zero shrinkage?. J Mater Sci 24, pp. 1528 1532, 1989. DOI: https://doi.org/10.1007/BF01105666
Yates, B., McCalla, B.A., Phillips, L.N., Kingston-Lee, D.M. and Rogersal, K.F., ?The thermal expansion of carbon fibre-reinforced plastics? J Mater Sci 14, pp. 1207 1217. 1979. DOI: https://doi.org/10.1007/BF00561306
Snow, A.W. and Armistead, J.P., "Dilatometry on Thermoset Resins", NRL Maeminmdu Report, 1991.
Chun L., Kevin P., Michael R.W. and Graeme S., ?In-situ measurement of chemical shrinkage of MY750 epoxy resin by a novel gravimetric method? Composites Science and Technology,Vol. 64:1, pp. 55-64 2004. DOI: https://doi.org/10.1016/S0266-3538(03)00199-4
Yu, H., Mhaisalkar, S.G. and Wong, E.H., ?Observations of Gelation and Vitrification of a Thermosetting Resin during the Evolution of Polymerization Shrinkage?, Macromol. Rapid Commun. 26, pp. 1483-1487, 2005. DOI:https://doi.org/10.1002/marc.200500333
Mohsan H., Pascal H. and Larry L., ?Cure shrinkage characterization and modeling of a polyester resin containing low profile additives?, Composites Part A: Applied Science and Manufacturing, Vol. 38:3, pp. 994-1009, 2007. DOI: https://doi.org/10.1016/j.compositesa.2006.06.020.
B. Patham, "COMSOL® Implementation of a viscoelastic model with cure-temperature-time superposition for predicting cure stresses and springback in a thermoset resin", Excerpt from the Proceedings of the COMSOL Conference 2009 Bangalore
※ AI-Helper는 부적절한 답변을 할 수 있습니다.