최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기반도체디스플레이기술학회지 = Journal of the semiconductor & display technology, v.21 no.3, 2022년, pp.57 - 62
민경원 (한국세라믹기술원) , 최재호 (한국세라믹기술원) , 정윤성 (한국세라믹기술원) , 임원빈 (한양대학교 신소재공학과) , 김형준 (한국세라믹기술원)
The plasma resistance of multi-component glasses containing La, Gd, Ti, Zn, Y, Zr, Nb, and Ta was analyzed in this study. The plasma etching was performed via inductively coupled plasma-reactive ion etching (ICP-RIE) using CF4/O2/Ar mixed gas. After the reaction, the glass with a low fluoride sublim...
H. Radamson, L. Thylen, Monolithic Nanoscale Photonics-Electronics Intergation in Silicon and Other Group IV Elements, Elsevier Science, Netherlands, 2014, pp. 128.
T-K. Lin, W-K. Wang, S-Y. Huang, C-T. Tasi, D-S. Wuu, Comparison of Erosion Behavior and Particle Contamination in Mass-Production CF 4 /O 2 Plasma Chambers Using Y2O3 and YF3 Protective Coatings, Nanomaterials. 7 (2017) 183. https://doi.org/10.3390/nano7070183.
N. ITO, T. Moriya, F. Uesugi, M. Matsumoto, S. Liu, Y. Kitayama, Reduction of particle contamination in plasma-etching equipment by dehydration of chamber wall, Jpn J Appl Phys. 47 (2008) 5R. https://doi.org/10.1143/JJAP.47.3630.
S. J. Fonash, An Overview of Dry Etching Damage and Contamination Effects, J. Electrochem. Soc. 137 (1990) 12. https://doi.org/10.1149/1.2086322.
K. Miwa, T. Sawai, M. Aoyama, F. Inoue, A. Oikawa, and K. Imaoka, Particle Reduction using Y 2 O 3 Material in an Etching Tool, IEEE Int. Symp. Semicond. Manuf. Confer. Proc., San Jose, CA, (2005) 479-482.
D.M. Kim, Y.S. Oh, S.W. Kim, H.T. Kim, D.S. Lim, S.M. Lee, The erosion behaviors of Y 2 O 3 and YF 3 coatings under fluorocarbon plasma, Thin Solid Films 519 (2011) 6698-6702. https://doi.org/10.1016/j.tsf.2011.04.049.
Y.C. Cao, L. Zhao, J. Luo, K. Wang, B.P. Zhang, H. Yokota, Y. Ito, J.F. Li, Plasma etching behavior of Y 2 O 3 ceramics: Comparative study with Al 2 O 3 , Appl. Surf. Sci. 366 (2016) 304-309. https://doi.org/10.1016/j.apsusc.2016.01.092.
C.S. Kim, M.J. Kim, H. Cho, T.E. Park, Y.H. Yun, Fabrication and plasma resistance of Y 2 O 3 ceramics, Ceram. Int. 41 (2015) 12757-12762. https://doi.org/10.1016/j.ceramint.2015.06.109.
R. Ramos, G. Cunge, B. Pelissier, O. Joubert, Cleaning aluminum fluoride coatings from plasma reactor walls in SiCl 4 /Cl 2 plasmas, Plasma Sources Sci. Technol. 16 (2007) 711-715. https://doi.org/10.1088/0963-0252/16/4/004.
J.S. Reed, Principles of Ceramics Processing, John Wiley & Sons Inc, New York, 1995, pp. 35-50.
J. Iwasawa, R. Nishimizu, M. Tokita, M. Kiyohara, Plasma-Resistant Dense Yttrium Oxide Film Prepared by Aerosol Deposition Process, J. Am. Ceram. Soc. 90 (2007) 2327-2332. https://doi.org/10.1111/j.1551-2916.2007.01738.
D. M. Kim, K. B. Kim, S. Y. Yoon, Y. S. Oh, H. T. Kim, S.M. Lee, Effects of artificial pores and purity on the erosion behaviors of polycrystalline Al 2 O 3 ceramics under fluorine plasma, J. Ceram. Soc. Jpn. 117 (2009) 863-867. https://doi.org/10.2109/jcersj2.117.863.
J. Kitamura, H. Mizuno, N. Kato, I. Aoki, Plasma-Erosion Properties of Ceramic Coating Prepared by Plasma Spraying, Mater. Trans. 47 (2006) 1677-1683. https://doi.org/10.2320/matertrans.47.1677.
J.H. Choi, H. Na, J. Park, H.J. Kim, Plasma corrosion resistance of aluminosilicate glasses containing Ca, Y and B under fluorocarbon plasma with Ar+, Journal of Non-Crystalline Solids. 521 (2019) 119498. https://doi.org/10.1016/j.corsci.2018.10.015.
J. H. Choi, H. B. Park, H. Na, H. J. Kim, Plasma corrosion resistance of RO-Al 2 O 3 -SiO 2 (R: Alkaline earth) under fluorocarbon plasma with Ar+: II. Plasma resistant glass, Corrosion Science. 146 (2019) 247-253. https://doi.org/10.1016/j.jnoncrysol.2019.119498.
H. Na, J. Park, S.C. Choi, H.J. Kim, The effect of composition of plasma resistance of CaO-Al 2 O 3 -SiO 2 glasses under Fluorocarbon Plasma with Ar+, Applied Surface Science. 476 (2019) 663-667. https://doi.org/10.1016/j.apsusc.2019.01.133.
Y.S. Jung, K.W. Min, J.H. Choi, J.S. Yoon, W.B. Im, H.J. Kim, Plasma-resistant characteristics according to sintering conditions of CaO-Al 2 O 3 -SiO 2 glass coating layer, J. Korean Ceram. Soc. 59 (2022) 86-93. https://doi.org/10.1007/s43207-021-00149-x
J.H. Choi, J.S. Yoon, Y.S. Jung, K.W. Min, W.B. Im, H.J. Kim, Analysis of plasma etching resistance for commercial quartz glasses used in semiconductor apparatus in fluorocarbon plasma, Materials Chemistry and Physics. 272 (2021) 0254-0584. https://doi.org/10.1016/j.matchemphys.2021.125015
W.M. Haynes, D.R. Lide, T.J. Bruno, CRC Handbook of Chemistry and Physics, CRC Press, United States, 2016, pp. 746, 749, 751, 774, 776, 778, 784, 786, 790, 797, 798.
Y.C. Kim, J. Oishi, S.H. Kang, The enthalpies of formation of gadolinium and ytterbium trifluorides, The Journal of Chemical Thermodynamics. 10 (1978) 975-981. https://doi.org/10.1016/0021-9614(78)90059-9
D.M. Kim, S.H. Lee, W.B. Alexander, K.B. Kim, Y.S. Oh, S.M. Lee, X-Ray Photoelectron Spectroscopy Study on the Interaction of Yttrium-Aluminum Oxide with Fluorine-Based Plasma, J. Am. Ceram. Soc. 94 (2011) 3455-3459. https://doi.org/10.1111/j.1551-2916.2011.04589.x
S.A. Utlak, T.M. Besmann, Thermodynamic assessment of the Na 2 O-Al 2 O 3 -SiO 2 -B 2 O 3 pseudo-binary and - ternary systems, The Journal of Chemical Thermodynamics. 130 (2019) 251-268. https://doi.org/10.1016/j.jct.2018.09.001
M.R. Ackerson, G.D. Cody, B.O. Mysen, Si solid state NMR and Ti K-edge XAFS pre-edge spectroscopy reveal complex behavior of Ti in silicate melts, Progress in Earth and Planetary Science, 7:14 (2020) https://doi.org/10.1186/s40645-020-00326-2
※ AI-Helper는 부적절한 답변을 할 수 있습니다.