최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국구조물진단유지관리공학회 논문집 = Journal of the Korea Institute for Structural Maintenance and Inspection, v.26 no.5, 2022년, pp.151 - 160
이건호 (서울시립대학교, 건축공학과 스마트시티융합전공) , 김재민 (서울시립대학교, 건축공학과 스마트시티융합전공) , 김재현 (서울시립대학교, 건축공학과) , 이상훈 (서울시립대학교, 건축공학과 스마트시티융합전공) , 김강수 (서울시립대학교, 건축공학과 스마트시티융합전공)
Owing to the recent increase in the frequency of explosion accidents, blast resistive design has garnered attention to reduce the damage of important structural elements. However, domestic research on the blast resistive structures is still insufficient, and domestic design guideline against blast l...
Zhang, C., Gholipour, G., and Mousavi, A. A. (2020). Blast loads induced responses of RC structural members: State-of-the-art review, Composites Part B: Engineering, 195, 108066.
Algassem, O., Li, Y., and Aoude, H. (2019). Ability of steel fibers to enhance the shear and flexural behavior of high-strength concrete beams subjected to blast loads, Engineering Structures, 199, 109611.
Shin, J., and Jeon, J. S. (2019). Retrofit scheme of FRP jacketing system for blast damage mitigation of non-ductile RC building frames, Composite Structures, 228, 111328.
Hu, Y., Chen, L., Fang, Q., Kong, X., Shi, Y., and Cui, J. (2021). Study of CFRP retrofitted RC column under close-in explosion. Engineering Structures, 227, 111431.
Luccioni, B., Isla, F., Codina, R., Ambrosini, D., Zerbino, R., Giaccio, G., and Torrijos, M. C. (2017). Effect of steel fibers on static and blast response of high strength concrete, International Journal of Impact Engineering, 107, 23-37.
Lee, I. C., Kim, H. S., Nam, J. S., Kim, S. B., and Kim, G. Y. (2013). Evaluation of Protective Performance of Fiber Reinforced Concrete T-Wall, Journal of the Korea Institute of Buliding Construction, 13(5), 465-473.
Byun, K. J., Kim, H. J., and Nam, J. W. (2011). Blast Load and Design of Protective Structures, Journal of the Korea Concrete Institute, 23(2), 16-22.
Lee, S. H., and Kim, H. S. (2022). Structural Behavior of Reinforced Concrete Members Subjected to Axial and Blast Loads Using Nonlinear Dynamic Analysis, J. Comput. Struct. Eng. Inst. Korea, 35(3), 141.
Stewart, M. G., and Netherton, M. D. (2015). Reliability-based design load factors for explosive blast loading, Journal of Performance of Constructed Facilities, 29(5), B4014010.
U.S. Department of Defense. (2008). Structures to resist the effects of accidental explosions. UFC-3-340-02, Washington DC, USA.
Korean Occupational Safety Health Agency. (2012). KOSHA GUIDE D-65-2018, KOSHA.
Kingery, C. N., and Bulmash, G. (1984). Airblast parameters from TNT spherical air burst and hemispherical surface burst. US Army Armament and Development Center, Ballistic Research Laboratory.
Swisdak Jr, M. M. (1994). Simplified Kingery airblast calculations. NAVAL SURFACE WARFARE CENTER INDIAN HEAD DIV MD.
Formby, S. A., and Wharton, R. K. (1996). Blast characteristics and TNT equivalence values for some commercial explosives detonated at ground level, Journal of Hazardous materials, 50(2-3), 183-198.
Netherton, M. D., and Stewart, M. G. (2010). Blast load variability and accuracy of blast load prediction models, International Journal of Protective Structures, 1(4), 543-570.
Schwer, L. E., and Malvar, L. J. (2005). Simplified concrete modeling with *MAT_CONCRET_DAMAGE_REL3. LS-DYNA Anwenderforum, Bamberg.
Bischoff, P. H., and Perry, S. H. (1991). Compressive behaviour of concrete at high strain rates, Materials and Structures, 24, 425-450.
Malvar, L. J., and Ross, C. A. (1998). Review of Strain Rate Effectes for Concrete in Tension, ACI Materials Journal, 95(6), 735-739.
Malvar, L. J. (1998). Review of Static and Dynamic Properties of Steel Reinforcing Bars, ACI Materials Journal, 95(6), 609-616.
Harding, J., and L. Mo Welsh. (1983), A tensile testing technique for fibre-reinforced composites at impact rates of strain. Journal of Materials Science, 18(6), 1810-1826.
Hou, J. P., and Ruiz, C. (2000) Measurement of the properties of woven CFRP T300/914 at different strain ratess, Composites Science and Technology, 60(15), 2829-2834.
CEB, (1993), CEP-FIP Model Code 1990, Redwood Books, Trobridge, Wiltshire, UK.
Tanapornraweekit, G., Haritos, N., and Mendis, P. (2011). Behavior of FRP-RC Slabs under Multiple Independent Air Blasts, Journal of Performance of Constructed Facilities, 25(5), 433-440.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.