최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Composites research = 복합재료, v.35 no.4, 2022년, pp.248 - 254
이지혜 (Composites Research Division, Korea Institute of Materials Science) , 이동현 (Composites Research Division, Korea Institute of Materials Science) , 조승찬 (Composites Research Division, Korea Institute of Materials Science) , 권한상 (Major of Materials System Engineering, School of Convergence Material Engineering, Pukyong National University) , 이상관 (Composites Research Division, Korea Institute of Materials Science) , 이상복 (Composites Research Division, Korea Institute of Materials Science) , 김정환 (Composites Research Division, Korea Institute of Materials Science)
In this study, TiB2-steel composite with high-fractional TiB2 reinforcement was fabricated by gas pressure infiltration process and the microstructure analysis and compressive strength and hardness were evaluated. To elucidate the correlation between microstructure and mechanical properties for fabr...
Cho, S., Jo, I., Kim, H., Kwon, H.-T., Lee, S.-K., and Lee, S.-B., "Effect of TiC Addition on Surface Oxidation Behavior of SKD11 Tool Steel Composites," Applied Surface Science, Vol. 415, 2017, pp. 155-160.
Akhtar, F., Guo, S., Feng, P., Khadijah Ali, S., and Syed Javid, A., "TiC-maraging Stainless Steel Composite: Microstructure, Mechanical and Wear Properties," Rare Metals, Vol. 25, No. 6, 2006, pp. 630-635.
Ko, S., Park, H., Lee, Y.-H., Shin, S., Jo, I., Kim, J., Lee, S.-B., Kim, Y., Lee, S.-K., and Cho, S., "Fabrication of TiB 2 -Al1050 Composites with Improved Microstructural and Mechanical Properties by a Liquid Pressing Infiltration Process," Materials, Vol. 13, No. 7, 2020, 1588.
Kumar, A., Batham, H., and Das, A.K., "Microhardness of FeTiB 2 Composite Coating on AISI 304 Stainless Steel by TIG Coating Technique," Materials Today: Proceedings, Vol. 39, 2021, pp. 1291-1295.
Lee, J., Kim, N.J., Jung, J.Y., Lee, E.-S., and Ahn, S., "The Influence of Reinforced Particle Fracture on Strengthening of Spray Formed Cu-TiB 2 Composite," Scripta Materialia, Vol. 39, No. 8, 1998, pp. 1063-1069.
Gonzalez, R., Barandika, M.G., Ona, D., Sanchez, J.M., Villellas, A., Valea, A., and Castro, F., "New Binder Phases for the Consolidation of TiB 2 Hardmetals," Materials Science and Engineering: A, Vol. 216, No. 1, 1996, pp. 185-192.
Wang, H.M., Liu, J.Q., Li, G.R., Tang, F., Yan, Y.W., Gao, L.P., and Zhao, Y.T., "Effect of TiB 2 Content on Microstructure And Mechanical Properties of (TiB 2 p+B 4 C p )/Al Composites Fabricated by Microwave Sintering," Journal of Materials Research and Technology, Vol. 13, 2021, pp. 1509-1520.
Zhang, L., Huang, M., Zhang, D., and Wang, E., "Effect of Rareearth Elements on Microstructure and Mechanical Properties of in-situ Fe-TiB 2 Composites," Materials Today Communications, Vol. 29, 2021, 102860.
Springer, H., Aparicio Fernandez, R., Duarte, M.J., Kostka, A., and Raabe, D., "Microstructure Refinement for High Modulus in-situ Metal Matrix Composite Steels via Controlled Solidification of the System Fe-TiB 2 ," Acta Materialia, Vol. 96, 2015, pp. 47-56.
Aparicio-Fernandez, R., Springer, H., Szczepaniak, A., Zhang, H., and Raabe, D., "In-situ Metal Matrix Composite Steels: Effect of Alloying and Annealing on Morphology, Structure and Mechanical Properties of TiB 2 Particle Containing High Modulus Steels," Acta Materialia, Vol. 107, 2016, pp. 38-48.
Kaptanoglu, M., and Eroglu, M., "Microstructure and Wear of Iron-based Hardfacings Reinforced with in-situ Synthesized TiB 2 Particles," Kovove Materialy, Vol. 55, 2017, pp. 123-131.
Zhunkovskii, G.L., Grigoriev, O.N., and Vedel, D.V., "Interaction of Titanium Diboride with Iron and AISI 321H Stainless Steel," Powder Metallurgy and Metal Ceramics, Vol. 60, No. 7, 2021, pp. 464-471.
Gai, L., and Ziemnicka-Sylwester, M., "The TiB 2 -based Fematrix Composites Fabricated Using Elemental Powders in one Step Process by Means of SHS Combined with Pseudo-HIP," International Journal of Refractory Metals and Hard Materials, Vol. 45, 2014, pp. 141-146.
Wu, N., Xue, F., Wang, J., Yang, H., Luo, F., and Ruan, J., "Effect of TiN Addition on the Microstructure and Mechanical Properties of TiB 2 -FeNi Based Cermets," Materials Science and Engineering: A, Vol. 743, 2019, pp. 546-557.
Lee, D., Cho, S., Kim, Y., Lee, S.-K., Lee, S.-B., and Jo, I., "Mechanical Properties and Wear Performance of the Al7075 Composites Reinforced with Bimodal Sized SiC Particles," Composites Research, Vol. 30, No. 5, 2017, pp. 310-315.
Lee, Y.-H., Kim, N., Lee, S.-B., Kim, Y., Cho, S., Lee, S.-K., and Jo, I., "Microstructure and Mechanical Properties of Lightweight TiC-steel Composite Prepared by Liquid Pressing Infiltration Process," Materials Characterization, Vol. 162, 2020, 110202.
Wang, Z.-J., Zhang, W.-N., Li, Y.-W., Wang, G.-D., and Liu, H.-T., "Heterogeneous Nucleation of M 2 B-type Borides (M Cr, Fe) Attached to TiB 2 and Ti(C,N) Particles in As-cast High Borated Steel," Materials Characterization, Vol. 169, 2020, 110588.
Guo, C., and Kelly, P.M., "Boron Solubility in Fe-Cr-B Cast Irons," Materials Science and Engineering: A, Vol. 352, No. 1, 2003, pp. 40-45.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.