최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국안전학회지 = Journal of the Korean Society of Safety, v.37 no.4, 2022년, pp.120 - 128
이영만 (한경대학교 토목안전환경공학과) , 이인석 (한경대학교 사회안전시스템공학부(안전공학전공))
Printed circuit boards (PCBs) are a basic component in the electronics industry and are widely used in nearly all electronic products, such as mobile phones, tablet computers, and digital cameras, as well as in electric equipment. PCB manufacturing involves the use of many chemicals and chemical pro...
S. G. Hong, Introduction of New PCB Manufacturing Technology, 9, 2014.
Korea Printed Circuit Association (KPCA), Status of PCB Industry in Korea, 2020.
C. H. Park, H. S. Kim, B. H. Jeon and D. H. Kim, "Study on Safety Management Plan through Chemical Accident Investigation in PCB Manufacturing Facility Etching Process", Journal of the Korea Academia-Industrial Cooperation Society, Vol. 19, No. 4, pp. 132-137, 2018.
Chemical Substances Information Center, Accident Casebook, National Institute of Chemical Safety. https://icis.me.go.kr/searchTotal.do.
Ministry of Employment and Labor, Status of Industrial Accidents, 12, 2020.
J. W. Jeong, Notes to Risk Assessment, 36-46, 2015.
Ministry of Employment and Labor, Guide to Risk Assessment. Ministry of Employment and Labor, 2021.
Korea Occupational Safety and Health Agency, Risk Assessment Support System, https://kras.kosha.or.kr.
D. Y. Jeong, "A Study on Problems and Improvement of Domestic Risk Assessment", Thesis, Seoul National University Of Science And Technology, 2019.
S. H. Seo, J. I. Weon and H. S. Woo, "Effective Detection Technique of Near Miss using 4M Risk Assessment Methodology", J. Korean Soc. Saf., Vol. 27, No. 5, pp. 164-169, 2012.
J. G. Jeong, M. S. Bang, H. S. Kang and H. I. Jeong, "A Study on the Improvement of the Railway Safety Sign for Enhancing Visibility and Legibility", J. Korean Soc. Saf., Vol. 31, No. 5, pp. 171-176, 2016.
S. G. Kim, S. E. Jin and Y. K. Nam, "An Evaluation and Improvement of the Safety Signs for Increasing Recognition Rate", Journal of the Ergonomic Society of Korea, Vol. 39, No. 2, pp. 109-117, 2020.
J. S. Jang and D. H. Rie, "A Comparative Study for Dispersion Model in Evacuation Plan by using MAS-based Evacuation Simulation", J. Korean Soc. Saf., Vol. 29, No. 1, pp. 59-63, 2014.
E. B. Lee, S. I. Kwak and Y. B. Choi, "Technical Criterion of Safety Evaluation of Leakage Preventing Plates for Alleviating Space Shortage Between Chemical Stroage Tank and Dike", J. Korean Soc. Saf., Vol. 33, No. 5, pp. 42-50, 2018.
M. N. Hur and C. S. Shin, "An Experimental Study on the Extinguishing Performance of Sprinkler Heads according to Discharge Coefficient", J. Korean Soc. Saf., Vol. 33, No. 2, pp. 32-38, 2018.
I. K. Park, D. S. Jang, Y. W. Lee, O. H. Kwon and D. H. Doh, "Unsteady Heat Transfer of Fire Door Exposed to High Temperature", J. Korean Soc. Saf., Vol. 15, No. 1, pp. 59-65, 2000.
K. H. Oh, H. S. Kim and C. H. Lee, "A Study on The Explosion Characteristics of Flammable Gases", J. Korean Soc. Saf., Vol. 7, No. 3, pp. 66-72, 1992.
B. T. Yoo, E. B. Lee and J. G. Kim, "Development on the Safety Management System of Hazardous Chemicals under the Chimicals Control Act:Focusing on Safety Assessment System", J. Korean Soc. Saf., Vol. 34, No. 3, pp. 96-101, 2019.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.