최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국결정성장학회지 = Journal of the Korean crystal growth and crystal technology, v.33 no.6, 2023년, pp.268 - 275
문인용 (한국생산기술연구원) , 송영환 (한국생산기술연구원)
This paper delves into the crucial realm of support structures in metal additive manufacturing (AM) processes and their direct impact on the stiffness of printed components. With the continuous evolution of AM technologies, optimizing support structures has become imperative to enhance the overall q...
J. Smith, W. Xiong, W. Yan, S. Lin, P. Cheng, O.L. Kafka and W.K. Liu, "Linking process, structure, property, and performance for metal-based additive manufacturing: computational approaches with experimental support", Comput. Mech. 57 (2016) 583.?
G. Allaire and B. Bogosel, "Optimizing supports for additive manufacturing", Struct. Multidiscipl. Optim. 58 (2018) 2493.?
K.P. Lee, K.M. Kim, S.H. Kang, J.H. Han and K.H. Jung, "Optimization for high speed manufacturing of ti64 alloy by a selective laser melting technique", J. Korean Cryst. Growth Cryst. 28 (2018) 217.?
P. Didier, G. Le Coz, G. Robin, P. Lohmuller, B. Piotrowski, A. Moufki and P. Laheurte, "Consideration of SLM additive manufacturing supports on the stability of flexible structures in finish milling", J. Manuf. Process. 62 (2021) 213.?
L.D. Bobbio, S. Qin, A. Dunbar, P. Michaleris and A.M. Beese, "Characterization of the strength of support structures used in powder bed fusion additive manufacturing of Ti-6Al-4V", Addit. Manuf. 14 (2017) 60.?
G. Strano, L. Hao, R.M. Everson and K.E. Evans, "A new approach to the design and optimisation of support structures in additive manufacturing", Int. J. Adv. Manuf. Technol. 66 (2013) 1247.?
J.P. Jarvinen, V. Matilainen, X. Li, H. Piili, A. Salminen, I. Makela and O. Nyrhila, "Characterization of effect of support structures in laser additive manufacturing of stainless steel", Phys. Procedia. 56 (2014) 72.?
P.N.J. Lindecke, H. Blunk, J.P. Wenzl, M. Moller and C. Emmelmann, "Optimization of support structures for the laser additive manufacturing of TiAl6V4 parts", Procedia CIRP 74 (2018) 53.?
J. Jiang, X. Xu and J. Stringer, "Support structures for additive manufacturing: a review", J. Manuf. Mater. Process. 2 (2018) 64.?
S. Weber, J. Montero, C. Petroll, T. Schafer, M. Bleckmann and K. Paetzold, "The fracture behavior and mechanical properties of a support structure for additive manufacturing of Ti-6Al-4V", Crystals. 10 (2020) 343.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.