$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

고속충격 반응형 스마트유체 전색재료를 적용한 실 규모 발파실험 및 현장실증 연구
Full-Scale Blasting Experiment and Field Verification Research Using Shock-Reactive Smart Fluid Stemming Materials 원문보기

화약·발파 = Explosives & blasting, v.41 no.1, 2023년, pp.1 - 18  

고영훈 (한국건설기술연구원 지반연구본부) ,  서승환 (한국건설기술연구원 지반연구본부) ,  정영준 (주식회사 석성발파건설) ,  노상림 (지에스건설(주) 지반팀) ,  조상호 (전북대학교 공과대학 토목) ,  정문경 (한국건설기술연구원 지반연구본부)

초록
AI-Helper 아이콘AI-Helper

전색작업은 발파공 내에서 폭발가스가 쉽게 유출되지 않게 적용되는 중요한 과정이다. 전색물질은 폭발 에너지를 더 길게 공 내부에서 작용할 수 있게 하며, 암석의 파쇄도를 증가시키는데 큰 도움이 된다. 본 연구에서는 동적 충격에 반응하는 전단농화유체 기반의 전색물질을 개발하였다. 전단농화유체 기반의 전색재료의 성능을 검증하기 위해 실 규모 발파실험 및 터널현장에 대한 현장 실증을 수행하였다. 첫 번째 실험에서는 전색재료 적용에 따른 발파공 내부의 압력을 직접 측정하였고, 도심지 터널현장 실증에서는 모래전색과 전단농화유체 기반 전색재료의 발파결과를 서로 비교하였다. 발파공 내 압력측정 결과 본 연구를 통해 개발한 전색물질을 적용한 경우, 발파공 상부에서 측정된 압력이 일반적인 모래전색을 적용한 경우보다 낮았으며 폭발가스 분출량도 적었다. 또한 현장 실증결과 터널발파에서 개발전색물질의 굴착성능이 모래전색 발파의 경우보다 우수함을 검증할 수 있었다.

Abstract AI-Helper 아이콘AI-Helper

Stemming is a process applied to blast holes to prevent gases from escaping during detonation. A stemming material helps confine the explosive energy for longer and increases rock fragmentation. This study developed a stemming material based on a shear-thickening fluid (STF) that reacts to dynamic s...

주제어

참고문헌 (23)

  1. 고영훈, 곽기석, 서승환, 정영준, 김식, 정문경, 2022,?수치해석 기법을 이용한 발파전색 재료 및 플러그 장치의 폭발압 저항효과에 관한 연구, 화약.발파, 제40권 2호, pp. 1-14. 

  2. American Society for Testing and Materials, 2018,?Standard Guide for Using the Seismic-Reflection?Method for Shallow Subsurface Investigation, ASTM?D7128-18, 7-30. 

  3. Brinkmann, J.R, 1990, An experimental study of the?effects of shock and gas penetration in blasting. In?Proceedings of the 3th International Symposium on?Rock Fragmentation by Blasting, Brisbane, Australia,?pp. 55-66. 

  4. Cui, Z.D., Yuan, L., Yan, C.L, 2010, Water-silt?composite blasting for tunnelling. Int. J. Rock Mech.?Min. Sci. 47, pp. 1034-1037. 

  5. Cho, SH., Kaneko K., 2004, Influence of the applied?pressure waveform on the dynamic fracture processes?in rock. Int J Rock Mech Min Sci, 41(5), pp.?771-784. 

  6. Crawford, N. C., Popp, L. B, Johns, K. E, Caire, L.?M, Peterson, B. N, Liberatore M. W, 2013, Shear?thickening of corn starch suspensions: Does?concentration matter?, Journal of Colloid and?Interface Science, vol. 396, pp. 83-89. 

  7. Dowding, C. H. and Aimone, C. T, 1985, Multiple?blast-hole stresses and measured fragmentation, Rock?Mech Rock Eng, pp. 17-36. 

  8. Eloranta, J, 1994, Stemming selection for large?diameter blast holes. In Proceedings of the 20rd?Annual Conference on Explosive and Blasting?Techniques, ISEE, pp. 1-11. 

  9. Floyd, J.L, 1999, Explosive energy relief-The key to?Control. over break. In Proceedings of the Explosion,?pp. 147-153. 

  10. Gurgen, S., Kushan, M.C., 2017, The effect of silicon?carbide additives on the stab resistance of shear?thickening fluid treated fabrics. Mech. Adv. Mater.?Struct. 24, pp. 1381-1390. 

  11. Kopp, J.W, 1987, Stemming Ejection and Burden?Movements from Small Borehole Blasts; United States?Department of the Interior, Bureau of Mines. 

  12. Ko, Y., Kwak, K., 2022, Blast effects of a shear?thickening fluid-based stemming material. Mining 2,?pp. 330-349. 

  13. Konya, C.J., Konya, A., 2018, Effect of Hole?Stemming Practices on Energy Efficiency of?Comminution. In Energy Efficiency in the Minerals?Industry, pp. 31-53. 

  14. Luo, Y., Wu, S., 2006, Study on length of stemming?material and its effect in hole-charged blasting. Mech.?Eng. 28, pp. 48-52. 

  15. Lu, J., Yang, P., Yan, M., Chen, and C. Zhou, Y.?Lou, and J. Li., 2012, Int. J. Rock Mech. Min. Sci.,?53, pp. 129-141. 

  16. Lownds, C. M, 2000, Measured shock pressure in the?splitting of domension stone, Proceedings of first?world conference on exlposives & blasting technique,?germany, pp. 241-246. 

  17. Li, Y.L., Shi, X.Z., Liu, B., Zhao, J.P., 2015,?Experimental research on reasonable length of water?stemming. pp. 11-16. 

  18. Phamotse, K.M., Nhleko, A.S., 2019, Determination?of optimal fragmentation curves for a surface?diamond mine. J. S. Afr. Inst. Min. Metall. 119, pp.?613-619. 

  19. Snelling, W.O., Hall, C., 1912, The Effect of?Stemming on the Efficiency of Explosives, United?States Government Printing Office: Washington, DC,?USA. 

  20. Wang, C, 1999, The action of the blasthole plug. J.?Univ. Hydr. Electric. Eng. 21, pp. 45-49. 

  21. Zong, Q., 1996, Theoretical discussion of movement?rule of stemming in blast holes. vol. 13, pp. 8-11. 

  22. Zhu, Z., Xie, H., Mohanty, B., 2008, Numerical?investigation of blasting-induced damage in cylindrical?rocks. Int. J. Rock Mech. Min. Sci. 45, pp. 111-121. 

  23. Zhang, Z. X, 2016, Stemming and Charge Length,?Rock Fracture and Blasting, pp. 271-281. 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

BRONZE

출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로