최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기항공우주시스템공학회지 = Journal of aerospace system engineering, v.17 no.3, 2023년, pp.39 - 50
노지섭 (경상국립대학교 기계항공공학부) , 신호영 (경상국립대학교 기계항공공학부) , 정민찬 (경상국립대학교 기계항공공학부) , 황준혁 (경상국립대학교 기계항공공학부) , 곽준우 (경상국립대학교 기계항공공학부) , 주현우 (한국항공우주산업(주)) , 권진회 (경상국립대학교 기계항공공학부) , 남영우 (한국항공대학교 스마트드론공학과)
This study established the stamp forming process conditions to develop thermoplastic composite fuselage parts for commercial aircraft. Initially, the blank size and shape, tensioner position, and pre-load were numerically optimized according to the wrinkle and uniformity of fabricated structures usi...
U. K. Vaidya and K. K. Chawla, "Processing of Fibre Reinforced Thermoplastic Composites", Int. Mater. Rev., vol. 53, no. 4, pp. 185-218, 2008.?
F. Henning, L. Karger, D. Dorr, F. J. Schirmaier, J. Seuffert, and A. Bernath, "Fast processing and continuous simulation of automotive structural composite components," Compos Sci Technol, vol. 171, pp. 261-279, 2019.
H. Suemasu, K. Friedrich, and M. Hou, "On deformation of woven fabric- reinforced thermoplastic composites during stamp-forming," Composites Manufacturing, vol. 5, pp. 31-39, 1994.?
J. M. Lee, C. J. Lee, B. M. Kim, and D. C. Ko, "Design of prepreg compression molding for manufacturing of CFRTP B-pillar reinforcement with equivalent mechanical properties to existing steel part," Int J Precis Eng Manuf, vol. 21, pp. 545-556, 2020.
B. Vieille, W. Albouy, L. Chevalier, and L. Taleb, "About the influence of stamping on thermoplastic-based composites for aeronautical applications," Composites part B: Engineering, vol. 45, no. 1, pp. 821-834, 2013.
H. Suemasu, K. Friedrich, and M. Hou, "On deformation of woven fabric- reinforced thermoplastic composites during stamp-forming," Composites Manufacturing, vol. 5, no. 1 pp. 31-39, 1994.?
D. Trudel-Boucher, B. Fisa, J. Denault, and P. Gagnon, "Experimental investigation of stamp forming of unconsolidated commingled E-glass/polypropylene fabrics," Composites Science and Technology, vol. 66, pp. 555-570, 2006.?
Boeing, Boeing 787 from the ground up. 2019.?
G. Pandian, M. Pecht, E. Zio, and M. Hodkiewicz, "Data-driven reliability analysis of Boeing 787 Dreamliner", Chinese Journal of Aeronautics, vol. 33, no 7, pp. 1969-1979, 2020.?
R. M. Stack and F. Lai, "Developments in Thermoforming Thermoplastic Composites" Thermoforming Quarterly, vol. 32 pp. 48-53, 2013.?
S. Mashau, "An Investigation into the Manufacturing of complex, Three-Dimensional Components using Continuous Fibre Reinforced Thermoplastic Composite", Master thesis, University of Witwatersrand, 2017.?
P. Bean, R A. Lopez-Anido, and S. Vel, 'Integration of Material Characterization, Thermoforming Simulation, and As-Formed Structural Analysis for Thermoplastic Composites', Polymers, vol. 14, no. 9, 1877, 2022.?
P. Han, J. Butterfield, S. Buchanan, R. McCool, Z. Jiang, M. Price, and A. Murphy, "The prediction of process-induced deformation in a thermoplastic composite in support of manufacturing simulation", Journal of Engineering Manufacture, vol. 227, no. 10, pp. 1417-1429, 2013.?
S. P. Haanappel, R. H. W. ten Thije, U. Sachs, B. Rietman, and R. Akkerman. "Formability analyses of uni-directional and textile reinforced thermoplastics," Composites Part A: Applied Science and Manufacturing, vol. 56, pp. 80-92, 2014.?
Y. J. Jeon, Y. M. Heo, S. H. Yun, and D. E. Kim, "Stamping process design to develop a urea tank cover for excavators based on sheet metal forming analysis", J. Korea Society of Die & Mold Engineering, vol. 14, pp. 49-55, 2020.?
S. M. Samuel, "Thermostamping of Lond-Fiber Thermoplastic Composites: Consideration of Wrinkles, Distortions, and Cost", Master thesis, Concordia University, 2018.?
J. W. Suh, "A Consideration on Composite Material Certification for Small Aircraft Structure", Current Industrial and Technological Trends in Aerospace, vol. 7, pp. 128-140, 2009.?
J. Sjolander, P. Hallander, and M. Akermo, "Forming induced wrinkling of composite laminates: a numerical study on wrinkling mechanisms", Composite Part A Appl Sci Manuf, vol. 78, pp. 234-245, 2016.?
H. J. Lee, Y. J. Jeon, and H. Cho, "Development of a process to apply uniform pressure to bond CFRP patches to the inner surface of undercut-shaped sheet metal parts", Korean Society of Die & Mold Engineering, vol. 14, no. 4, pp. 65-70, 2020.?
G. Bogucki, W. McCarvill, S. Ward, and J. S. Tomblin, "Guidelines for the Development of Process Specifications, Instructions, and Controls for the Fabrication of Fiber-Reinforced Polymer Composites", FAA Technical Report, DOT/FAA/AR02/110, NTIS, 2003.?
R. A. Brooks, W. Hongyan, D. Zerong, X. Jie, S. Qinghua, H. Liu, J. P. Dear, and N. Li, "A review on stamp forming of continuous fibre-reinforced thermoplastics", International Journal of Lightweight Materials and Manufacture, vol. 5, no. 3, pp. 411-430, 2022.?
A. Benkaddour, G. Lebrun, and L. Laberge-Lebel, "Thermostamping of [0/90]n carbon/peek laminates: Influence of support configuration and demolding temperature on part consolidation", Polymer composites, vol. 39, no. 9, pp. 3341-3352, 2018.?
S. Haanappel, "Forming of UD Fibre Reinforced Thermoplastics", PhD Thesis, University of Twente, Netherlands, 2013.?
D. Saenz-Castillo, M. I. Martin, S. Calvo, F. Rodriguez-Lence, and A. Guemes, "Effect of processing parameters and void content on mechanical properties and NDI of thermoplastic composites" Composites Part A: Applied Science and Manufacturing, vol. 121, pp. 308-320, 2019.?
Toray Advanced Composites. Processing guidelines for TC1225 T700/PAEK UD tape. Data sheet. Internal document provided by Toray to DLR, 2019.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.