참고문헌 (25)

1. U. K. Vaidya and K. K. Chawla, "Processing of Fibre Reinforced Thermoplastic Composites", Int. Mater. Rev., vol. 53, no. 4, pp. 185-218, 2008.？ 

   상세보기

2. F. Henning, L. Karger, D. Dorr, F. J. Schirmaier, J. Seuffert, and A. Bernath, "Fast processing and continuous simulation of automotive structural composite components," Compos Sci Technol, vol. 171, pp. 261-279, 2019. 

   상세보기

3. H. Suemasu, K. Friedrich, and M. Hou, "On deformation of woven fabric- reinforced thermoplastic composites during stamp-forming," Composites Manufacturing, vol. 5, pp. 31-39, 1994.？ 

   상세보기

4. J. M. Lee, C. J. Lee, B. M. Kim, and D. C. Ko, "Design of prepreg compression molding for manufacturing of CFRTP B-pillar reinforcement with equivalent mechanical properties to existing steel part," Int J Precis Eng Manuf, vol. 21, pp. 545-556, 2020. 

5. B. Vieille, W. Albouy, L. Chevalier, and L. Taleb, "About the influence of stamping on thermoplastic-based composites for aeronautical applications," Composites part B: Engineering, vol. 45, no. 1, pp. 821-834, 2013. 

6. H. Suemasu, K. Friedrich, and M. Hou, "On deformation of woven fabric- reinforced thermoplastic composites during stamp-forming," Composites Manufacturing, vol. 5, no. 1 pp. 31-39, 1994.？ 

   상세보기

7. D. Trudel-Boucher, B. Fisa, J. Denault, and P. Gagnon, "Experimental investigation of stamp forming of unconsolidated commingled E-glass/polypropylene fabrics," Composites Science and Technology, vol. 66, pp. 555-570, 2006.？ 

   상세보기

8. Boeing, Boeing 787 from the ground up. 2019.？ 

9. G. Pandian, M. Pecht, E. Zio, and M. Hodkiewicz, "Data-driven reliability analysis of Boeing 787 Dreamliner", Chinese Journal of Aeronautics, vol. 33, no 7, pp. 1969-1979, 2020.？ 

   상세보기

10. R. M. Stack and F. Lai, "Developments in Thermoforming Thermoplastic Composites" Thermoforming Quarterly, vol. 32 pp. 48-53, 2013.？ 

11. S. Mashau, "An Investigation into the Manufacturing of complex, Three-Dimensional Components using Continuous Fibre Reinforced Thermoplastic Composite", Master thesis, University of Witwatersrand, 2017.？ 

12. P. Bean, R A. Lopez-Anido, and S. Vel, 'Integration of Material Characterization, Thermoforming Simulation, and As-Formed Structural Analysis for Thermoplastic Composites', Polymers, vol. 14, no. 9, 1877, 2022.？ 

    상세보기

13. P. Han, J. Butterfield, S. Buchanan, R. McCool, Z. Jiang, M. Price, and A. Murphy, "The prediction of process-induced deformation in a thermoplastic composite in support of manufacturing simulation", Journal of Engineering Manufacture, vol. 227, no. 10, pp. 1417-1429, 2013.？ 

    상세보기

14. S. P. Haanappel, R. H. W. ten Thije, U. Sachs, B. Rietman, and R. Akkerman. "Formability analyses of uni-directional and textile reinforced thermoplastics," Composites Part A: Applied Science and Manufacturing, vol. 56, pp. 80-92, 2014.？ 

    상세보기

15. Y. J. Jeon, Y. M. Heo, S. H. Yun, and D. E. Kim, "Stamping process design to develop a urea tank cover for excavators based on sheet metal forming analysis", J. Korea Society of Die & Mold Engineering, vol. 14, pp. 49-55, 2020.？ 

16. S. M. Samuel, "Thermostamping of Lond-Fiber Thermoplastic Composites: Consideration of Wrinkles, Distortions, and Cost", Master thesis, Concordia University, 2018.？ 

17. J. W. Suh, "A Consideration on Composite Material Certification for Small Aircraft Structure", Current Industrial and Technological Trends in Aerospace, vol. 7, pp. 128-140, 2009.？ 

18. J. Sjolander, P. Hallander, and M. Akermo, "Forming induced wrinkling of composite laminates: a numerical study on wrinkling mechanisms", Composite Part A Appl Sci Manuf, vol. 78, pp. 234-245, 2016.？ 

19. H. J. Lee, Y. J. Jeon, and H. Cho, "Development of a process to apply uniform pressure to bond CFRP patches to the inner surface of undercut-shaped sheet metal parts", Korean Society of Die & Mold Engineering, vol. 14, no. 4, pp. 65-70, 2020.？ 

20. G. Bogucki, W. McCarvill, S. Ward, and J. S. Tomblin, "Guidelines for the Development of Process Specifications, Instructions, and Controls for the Fabrication of Fiber-Reinforced Polymer Composites", FAA Technical Report, DOT/FAA/AR02/110, NTIS, 2003.？ 

21. R. A. Brooks, W. Hongyan, D. Zerong, X. Jie, S. Qinghua, H. Liu, J. P. Dear, and N. Li, "A review on stamp forming of continuous fibre-reinforced thermoplastics", International Journal of Lightweight Materials and Manufacture, vol. 5, no. 3, pp. 411-430, 2022.？ 

    상세보기

22. A. Benkaddour, G. Lebrun, and L. Laberge-Lebel, "Thermostamping of [0/90]n carbon/peek laminates: Influence of support configuration and demolding temperature on part consolidation", Polymer composites, vol. 39, no. 9, pp. 3341-3352, 2018.？ 

    상세보기

23. S. Haanappel, "Forming of UD Fibre Reinforced Thermoplastics", PhD Thesis, University of Twente, Netherlands, 2013.？ 

24. D. Saenz-Castillo, M. I. Martin, S. Calvo, F. Rodriguez-Lence, and A. Guemes, "Effect of processing parameters and void content on mechanical properties and NDI of thermoplastic composites" Composites Part A: Applied Science and Manufacturing, vol. 121, pp. 308-320, 2019.？ 

    상세보기

25. Toray Advanced Composites. Processing guidelines for TC1225 T700/PAEK UD tape. Data sheet. Internal document provided by Toray to DLR, 2019. 

저자의 다른 논문 :

권진회 (69)