최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of technologic dentistry : JTD, v.45 no.2, 2023년, pp.39 - 47
박유진 (부산가톨릭대학교 치기공학과) , 정안나 (부산가톨릭대학교 치기공학과)
Purpose: This study aimed to confirm the applicability of gloss polishing using automatic barrel finishing with respect to three-dimensional (3D)-printed resin specimens. The surface roughness and grinding angle of the 3D-printed resin specimens were observed with respect to gloss polishing time usi...
Kim DY, Jeong ID, Kim JH, Kim HY, Kim WC. Reproducibility of different coping arrangements fabricated by dental micro-stereolithography: evaluation of marginal and internal gaps in metal copings. J Dent Sci. 2018;13:220-225.?
Song ES, Kim B, Lim YJ, Lee JJ. Survey study on the preference of dental medical personnel for dental CAD/CAM milling machines. J Korean Acad Prosthodont. 2018;56:188-198.?
Shin DH, Park YM, Park SH. Correlation between UV-dose and shrinkage amounts of post-curing process for precise fabrication of dental model using DLP 3D printer. J Korean Soc Manuf Process Eng. 2018;17:47-53.?
Kim JH, Kim KB. Evaluation the clinical acceptability of the marginal and internal gaps of fixed partial denture fabricated with additive manufacturing technology. J Korean Acad Dent Technol. 2018;40:209-215.?
Kim DY, Lee GY, Kim JH, Yang CS. Comparative analysis of strain according to the deposition of a constant temperature water bath of a denture-base artificial tooth produced using three-dimensional printing ultraviolet-curing resin. J Tech Dent. 2020;42:202-207.?
Kroiher M. Morphological chimeras of larvae and adults in a hydrozoan--insights into the control of pattern formation and morphogenesis. Int J Dev Biol. 2000;44:861-866.?
Quan H, Zhang T, Xu H, Luo S, Nie J, Zhu X. Photocuring 3D printing technique and its challenges. Bioact Mater. 2020;5:110-115. Erratum in: Bioact Mater. 2020;6:1789-1790.?
Kim DY. Difference between shrinkage rate of irradiation amount of 3D printing UV curable resin and shrinkage rate according to a constant temperature water bath. J Korean Acad Dent Technol. 2020;42:113-120.?
Jung AN, Park YJ, Choi SM. Component and surface residue observation of barrel finishing media for grinding dental resins. J Tech Dent. 2021;43:145-152.?
Hwang SS, Im YW, Kim SC, Han MS. Evaluation of surface roughness of heat-polymerized denture base resin according to the polishing step. J Korean Acad Dent Technol. 2015;37:205-212.?
Bollen CM, Lambrechts P, Quirynen M. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dent Mater. 1997;13:258-269.?
Lee JR, Jeong CH, Choi JH, Hwang JW, Lee DH. The effects of polishing technique and brushing on the surface roughness of acrylic resin. J Korean Acad Prosthodont. 2010;48:287-293.?
Jeong YC. Effect of polishing time of surface roughness and surface topography on Co-Cr alloy by dental auto polishing system [master's thesis]. Busan: Catholic University of Pusan, 2020.?
Jung AN. Manufacturing of barrel finishing for dental resin grinding and analysis of barrel finishing processing products [doctoral dissertation]. Busan: Catholic University of Pusan, 2021.?
Ko HJ, Park YJ, Choi SM. Observations of surface roughness of Co-Cr alloys according to grinding time of dental barrel finishing. J Tech Dent. 2021;43:93-98.?
Lee JS. A study on the barrel finishing process selection [master's thesis]. Siheung: Korea Polytechnic University, 2011.?
Singh S, Singh R. Some investigations on surface roughness of aluminium metal composite primed by fused deposition modeling-assisted investment casting using reinforced filament. J Braz Soc Mech Sci Eng. 2017;39:471-479.?
Jung AN, Ko HJ, Park YJ. Observation of surface roughness on three types of resin based on grinding time of dental automatic barrel finishing. J Tech Dent. 2021;43:56-61.?
Cho NG, Lee JJ, Choi MY. An error compensation in rough surface measurement by contact stylus profilometer. J Korean Soc Mach Tool Eng. 1999;8:126-134.?
Won JH, Oh RT, Kim JH, Kim WK. A study on the centrifugal barrel finishing of 3 dimensional form face (1). Paper presented at: Proceeding of Korean Society for Precision Engineering 1998 Autumn Conference; 1998 Nov 2; Daegu, Korea. Seoul: Korean Society for Precision Engineering, 1998. p. 31-35.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.