참고문헌 (41)

1. O'Brien WJ. Dental materials and their selection. 4th？ed. Quintessence Publishing, 2008. p. 243-252. 

2. Park JY, Kim HY, Kim JH, Kim JH, Kim WC. Comparison of prosthetic models produced by traditional and？additive manufacturing methods. J Adv Prosthodont.？2015;7:294-302. 

   원문보기 상세보기

3. Fathi HM, Al-Masoody AH, El-Ghezawi N, Johnson A.？The accuracy of fit of crowns made from wax patterns produced conventionally (hand formed) and via？CAD/CAM technology. Eur J Prosthodont Restor Dent.？2016;24:10-17. 

4. Prabhu R, Prabhu G, Baskaran E, Arumugam EM. Clinical acceptability of metal-ceramic fixed partial dental？prosthesis fabricated with direct metal laser sintering？technique-5 year follow-up. J Indian Prosthodont Soc.？2016;16:193-197. 

   상세보기

5. Miyazaki T, Hotta Y, Kunii J, Kuriyama S, Tamaki Y. A？review of dental CAD/CAM: current status and future？perspectives from 20 years of experience. Dent Mater J.？2009;28:44-56. 

6. Strub JR, Rekow ED, Witkowski S. Computer-aided？design and fabrication of dental restorations: current systems and future possibilities. J Am Dent Assoc.？2006;137:1289-1296. 

7. Ortorp A, Jonsson D, Mouhsen A, Vult von Steyern P.？The fit of cobalt-chromium three-unit fixed dental？prostheses fabricated with four different techniques: a？comparative in vitro study. Dent Mater. 2011;27:356-363. 

   상세보기

8. van Noort R. The future of dental devices is digital.？Dent Mater. 2012;28:3-12. 

   상세보기

9. Ekren O, Ozkomur A, Ucar Y. Effect of layered manufacturing techniques, alloy powders, and layer thickness on metal-ceramic bond strength. J Prosthet Dent.？2018;119:481-487. 

   상세보기

10. Stawarczyk B, Eichberger M, Hoffmann R, Noack F,？Schweiger J, Edelhoff D, et al. A novel CAD/CAM base？metal compared to conventional CoCrMo alloys: an？in-vitro study of the long-term metal-ceramic bond？strength. Oral Health Dent Manag. 2014;13:446-452. 

11. Al Jabbari YS, Koutsoukis T, Barmpagadaki X, Zinelis S.？Metallurgical and interfacial characterization of PFM？Co-Cr dental alloys fabricated via casting, milling or？selective laser melting. Dent Mater. 2014;30:e79-e88. 

    상세보기

12. Petzold R, Zeilhofer HF, Kalender WA. Rapid protyping technology in medicine--basics and applications.？Comput Med Imaging Graph. 1999;23:277-284. 

13. Huang Z, Zhang L, Zhu J, Zhang X. Clinical marginal？and internal fit of metal ceramic crowns fabricated？with a selective laser melting technology. J Prosthet？Dent. 2015;113:623-627. 

    상세보기

14. Zeng L, Zhang Y, Liu Z, Wei B. Effects of repeated？firing on the marginal accuracy of Co-Cr copings？fabricated by selective laser melting. J Prosthet Dent.？2015;113:135-139. 

15. Yao T, Deng Z, Zhang K, Li S. A method to predict the？ultimate tensile strength of 3D printing polylactic acid？(PLA) materials with different printing orientations.？Compos B Eng. 2019;163:393-402. 

16. Monroy K, Delgado J, Ciurana J. Study of the pore？formation on CoCrMo alloys by selective laser melting？manufacturing process. Procedia Eng. 2013;63:361-369. 

17. Vandenbroucke B, Kruth JP. Selective laser melting？of biocompatible metals for rapid manufacturing of？medical parts. Rapid Prototyp J. 2007;13:196-203. 

18. Yager S, Ma J, Ozcan H, Kilinc HI, Elwany AH, Karaman I. Mechanical properties and microstructure of？removable partial denture clasps manufactured using？selective laser melting. Addit Manuf. 2015;8:117-123. 

19. Ren XW, Zeng L, Wei ZM, Xin XZ, Wei B. Effects of？multiple firings on metal-ceramic bond strength of？Co-Cr alloy fabricated by selective laser melting. J？Prosthet Dent. 2016;115:109-114. 

20. Kaleli N, Ural C, Ozkoylu G, Duran I. Effect of layer？thickness on the marginal and internal adaptation？of laser-sintered metal frameworks. J Prosthet Dent.？2019;121:922-928. 

    상세보기

21. Kim DY. Evaluation of fits of metal copings fabricated？by using selective laser melting at various angles. J？Prosthet Dent. 2022;128:415-420. 

22. Jeong W, Kwon YS, Kim D. Development of a metal？3D printer using laser powder deposition and process？optimization for fabricating titanium alloy parts. J Korean Soc Laser Process. 2015;18:1-5. 

23. Gan MX, Wong CH. Practical support structures for？selective laser melting. J Mater Process Technol.？2016;238:474-484. 

    상세보기

24. Park CK. Development of an automatic classification？system for healthcare parts for metal printing [master's？thesis]. Seoul: Seoul National University of Science？and Technology, 2022. 

25. Quante K, Ludwig K, Kern M. Marginal and internal fit？of metal-ceramic crowns fabricated with a new laser？melting technology. Dent Mater. 2008;24:1311-1315. 

    상세보기

26. Tsitrou EA, Northeast SE, van Noort R. Evaluation of？the marginal fit of three margin designs of resin composite crowns using CAD/CAM. J Dent. 2007;35:68-73. 

27. Kim KB, Kim JH, Kim WC, Kim JH. Three-dimensional？evaluation of gaps associated with fixed dental prostheses fabricated with new technologies. J Prosthet？Dent. 2014;112:1432-1436. 

    상세보기

28. Vigolo P, Fonzi F. An in vitro evaluation of fit of zirconium-oxide-based ceramic four-unit fixed partial？dentures, generated with three different CAD/CAM？systems, before and after porcelain firing cycles and？after glaze cycles. J Prosthodont. 2008;17:621-626. 

29. Pak HS, Han JS, Lee JB, Kim SH, Yang JH. Influence of porcelain veneering on the marginal fit of Digident？and Lava CAD/CAM zirconia ceramic crowns. J Adv？Prosthodont. 2010;2:33-38. 

    원문보기 상세보기

30. Hunter AJ, Hunter AR. Gingival margins for crowns: a？review and discussion. Part II: discrepancies and configurations. J Prosthet Dent. 1990;64:636-642. 

    상세보기

31. Foster LV. Failed conventional bridge work from general dental practice: clinical aspects and treatment？needs of 142 cases. Br Dent J. 1990;168:199-201. 

    상세보기

32. Colpani JT, Borba M, Della Bona A. Evaluation of marginal and internal fit of ceramic crown copings. Dent？Mater. 2013;29:174-180. 

    상세보기

33. McLean JW, von Fraunhofer JA. The estimation of cement film thickness by an in vivo technique. Br Dent J.？1971;131:107-111. 

34. Gulker I. Margins. N Y State Dent J. 1985;51:213-215, 217. 

    상세보기

35. Sorensen SE, Larsen IB, Jorgensen KD. Gingival and？alveolar bone reaction to marginal fit of subgingival？crown margins. Scand J Dent Res. 1986;94:109-114. 

    상세보기

36. Assif D, Rimer Y, Aviv I. The flow of zinc phosphate？cement under a full-coverage restoration and its effect？on marginal adaptation according to the location of？cement application. Quintessence Int. 1987;18:765-774. 

37. Sulaiman F, Chai J, Jameson LM, Wozniak WT. A comparison of the marginal fit of In-Ceram, IPS Empress,？and Procera crowns. Int J Prosthodont. 1997;10:478-484. 

    상세보기

38. Moldovan O, Luthardt RG, Corcodel N, Rudolph H.？Three-dimensional fit of CAD/CAM-made zirconia？copings. Dent Mater. 2011;27:1273-1278. 

39. Holmes JR, Sulik WD, Holland GA, Bayne SC. Marginal fit of castable ceramic crowns. J Prosthet Dent.？1992;67:594-599. 

    상세보기

40. Tappa K, Jammalamadaka U. Novel biomaterials used？in medical 3D printing techniques. J Funct Biomater.？2018;9:17. 

    상세보기

41. Loh LE, Chua CK, Yeong WY, Song J, Mapar M, Sing？SL, et al. Numerical investigation and an effective？modelling on the selective laser melting (SLM) process？with aluminium alloy 6061. Int J Heat Mass Transf.？2015;80:288-300.