참고문헌 (20)

1. Kim DY, Jeong ID, Kim JH, Kim HY, Kim WC. Reproducibility of different coping arrangements fabricated by dental micro-stereolithography: evaluation of marginal and internal gaps in metal copings. J Dent Sci. 2018;13:220-225.？ 

2. Song ES, Kim B, Lim YJ, Lee JJ. Survey study on the preference of dental medical personnel for dental CAD/CAM milling machines. J Korean Acad Prosthodont. 2018;56:188-198.？ 

3. Shin DH, Park YM, Park SH. Correlation between UV-dose and shrinkage amounts of post-curing process for precise fabrication of dental model using DLP 3D printer. J Korean Soc Manuf Process Eng. 2018;17:47-53.？ 

4. Kim JH, Kim KB. Evaluation the clinical acceptability of the marginal and internal gaps of fixed partial denture fabricated with additive manufacturing technology. J Korean Acad Dent Technol. 2018;40:209-215.？ 

5. Kim DY, Lee GY, Kim JH, Yang CS. Comparative analysis of strain according to the deposition of a constant temperature water bath of a denture-base artificial tooth produced using three-dimensional printing ultraviolet-curing resin. J Tech Dent. 2020;42:202-207.？ 

6. Kroiher M. Morphological chimeras of larvae and adults in a hydrozoan--insights into the control of pattern formation and morphogenesis. Int J Dev Biol. 2000;44:861-866.？ 

   상세보기

7. Quan H, Zhang T, Xu H, Luo S, Nie J, Zhu X. Photocuring 3D printing technique and its challenges. Bioact Mater. 2020;5:110-115. Erratum in: Bioact Mater. 2020;6:1789-1790.？ 

8. Kim DY. Difference between shrinkage rate of irradiation amount of 3D printing UV curable resin and shrinkage rate according to a constant temperature water bath. J Korean Acad Dent Technol. 2020;42:113-120.？ 

9. Jung AN, Park YJ, Choi SM. Component and surface residue observation of barrel finishing media for grinding dental resins. J Tech Dent. 2021;43:145-152.？ 

10. Hwang SS, Im YW, Kim SC, Han MS. Evaluation of surface roughness of heat-polymerized denture base resin according to the polishing step. J Korean Acad Dent Technol. 2015;37:205-212.？ 

11. Bollen CM, Lambrechts P, Quirynen M. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dent Mater. 1997;13:258-269.？ 

    상세보기

12. Lee JR, Jeong CH, Choi JH, Hwang JW, Lee DH. The effects of polishing technique and brushing on the surface roughness of acrylic resin. J Korean Acad Prosthodont. 2010;48:287-293.？ 

13. Jeong YC. Effect of polishing time of surface roughness and surface topography on Co-Cr alloy by dental auto polishing system [master's thesis]. Busan: Catholic University of Pusan, 2020.？ 

14. Jung AN. Manufacturing of barrel finishing for dental resin grinding and analysis of barrel finishing processing products [doctoral dissertation]. Busan: Catholic University of Pusan, 2021.？ 

15. Ko HJ, Park YJ, Choi SM. Observations of surface roughness of Co-Cr alloys according to grinding time of dental barrel finishing. J Tech Dent. 2021;43:93-98.？ 

16. Lee JS. A study on the barrel finishing process selection [master's thesis]. Siheung: Korea Polytechnic University, 2011.？ 

17. Singh S, Singh R. Some investigations on surface roughness of aluminium metal composite primed by fused deposition modeling-assisted investment casting using reinforced filament. J Braz Soc Mech Sci Eng. 2017;39:471-479.？ 

    상세보기

18. Jung AN, Ko HJ, Park YJ. Observation of surface roughness on three types of resin based on grinding time of dental automatic barrel finishing. J Tech Dent. 2021;43:56-61.？ 

19. Cho NG, Lee JJ, Choi MY. An error compensation in rough surface measurement by contact stylus profilometer. J Korean Soc Mach Tool Eng. 1999;8:126-134.？ 

20. Won JH, Oh RT, Kim JH, Kim WK. A study on the centrifugal barrel finishing of 3 dimensional form face (1). Paper presented at: Proceeding of Korean Society for Precision Engineering 1998 Autumn Conference; 1998 Nov 2; Daegu, Korea. Seoul: Korean Society for Precision Engineering, 1998. p. 31-35.