$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

비정질 할로이사이트 나노입자의 교차적층 구조에 따른 탄소섬유/에폭시 라미네이트의 저속 충격 특성
Low Velocity Impact Property of CF/Epoxy Laminate according to Interleaved Structure of Amorphous Halloysite Nanotubes 원문보기

Composites research = 복합재료, v.36 no.4, 2023년, pp.270 - 274  

박예림 (Department of Ocean Advanced Materials Convergence Engineering, Korea Maritime and Ocean University) ,  (Department of Ocean Advanced Materials Convergence Engineering, Korea Maritime and Ocean University) ,  김윤해 (Department of Ocean Advanced Materials Convergence Engineering, Korea Maritime and Ocean University)

초록
AI-Helper 아이콘AI-Helper

필라멘트 와인딩 공정을 사용한 FRP 복합재의 적층 구조는 기존의 FRP 복합재의 적층 구조와는 다를 뿐만 아니라 일반적인 적층 구조를 토대로 기계적 물성에 대해서 분석하고자 한다면 그에 대한 영향을 파악하는 것이 어렵다. 따라서 전반적인 성능을 향상시키기 위해 기계적 물성을 개선하고 교차 적층 구조를 최적화하는 것이 필수적이다. 따라서 본 연구는 비정질 할로이사이트 나노튜브(Amorphous Halloysite Nanotubes, A-HNT)를 5개의 층 배열을 통해 교차 적층 탄소 섬유 강화 플라스틱(CFRP) 구조의 저속 충격 특성에 미치는 영향을 조사하는 것을 목표로 한다. 중량 낙하식 충격시험을 통하여 라미네이트의 저속 충격 특성을 확인하였으며, 충격을 가한 후에 현미경을 통하여 충격 파손 모드와 손상 정도를 비교 평가하였다. 나노 입자의 첨가 여부에 따른 각각의 교차 적층 구조 라미네이트를 10 J과 15 J의 충격에너지에서 비교하였다. 10 J의 경우 흡수에너지는 각 구조에서 비슷한 경향을 보였다. 그에 비해 15 J의 경우 흡수에너지는 각 구조에서 다른 흡수에너지를 가지며, 나노 입자가 첨가되지 않은 구조가 가장 높은 흡수에너지를 가진다. 또한 광학현미경을 통하여 각 구조에서 다양한 충격 파손 모드가 관찰되었다.

Abstract AI-Helper 아이콘AI-Helper

The stacking configuration of fiber-reinforced polymer (FRP) composites, achieved via the filament winding process, exhibits distinct variations compared to conventional FRP composite stacking arrangements. Consequently, it becomes challenging to ascertain the influence of mechanical properties base...

주제어

표/그림 (7)

참고문헌 (16)

  1. Hwang, D.W., Kumar, S., Park, S.J., Shin, D.H., and Kim, Y.H.,?"Evaluation of the Bending Strength of Preloaded CF/PEKK at?High Temperature," Modern Physics Letters B, Vol. 37, No. 18,?2023, 2340028. 

  2. Kumar, S., Wu, C.M., Lai, W.Y., and Lin, P.C., "Pin Hole Tensile?and Fatigue Properties of Self-reinforced PET Composites,"?Composite Structures, Vol. 255, 2021, 112981. 

  3. Kumar, S., Wu, C., Lin, P., Chen, J., and Shimamura, Y., "Strain?Concentration of Double-edge Hole Ductile Composites in the?Full Range of Deformation by Digital Image Correlation,"?Express Polymer Letters, Vol. 16, No. 10, 2022, pp. 1038-1051. 

  4. Li, X., Yu, T., Park, S.J., and Kim, Y.H., "Reinforcing Effects of?Gypsum Composite with Basalt Fiber and Diatomite for?Improvement of High-temperature Endurance," Construction?and Building Materials, Vol. 325, 2022, 126762. 

  5. Choi, J.S., Park, S.J., and Kim, Y.H., "Comparison of Mechanical?Properties on Helical/Hoop Hybrid Wound HNT Reinforced?CFRP Pipe with Water Absorption Behavior," Composite?Research, Vol. 34, No. 3, 2021, pp. 174-179. 

  6. Guo, K., Chen, S., Wen, L., and Xiao, J., "Prediction of Dome?Thickness for Composite Pressure Vessels from Filament?Winding Considering the Effect of Winding Pattern," Composite Structures, Vol. 306, 2023, 116580. 

  7. Morozov, E.V., "The Effect of Filament-winding Mosaic Patterns on the Strength of Thin-walled Composite Shells," Composite Structures, Vol. 76, No. 1-2, 2006, pp. 123-129. 

  8. Liu, H., Hu, H., Cao, D., Ji, Y., Wang, X., Chen, H., and Li, S.,?"Investigation on the Influence of Fiber Bundle Undulating?Architecture on Tensile Behavior of Filament Wound Composite Laminates," Materials, Vol. 16, No. 10, 2023, 3697. 

  9. Ye, Y., Chen, H., Wu, J., and Chan, C.M., "Interlaminar Properties of Carbon Fiber Composites with Halloysite Nanotube-toughened Epoxy Matrix," Composites Science and Technology,?Vol. 71, No. 5, 2011, pp. 717-723. 

  10. Ye, Y., Chen, H., Wu, J., and Ye, L., "High Impact Strength?Epoxy Nanocomposites with Natural Nanotubes," Polymer, Vol.?48, No. 21, 2007, pp. 6426-6433. 

  11. Alamri, H., and Low, I.M., "Effect of Water Absorption on the?Mechanical Properties of Nano-filler Reinforced Epoxy Nanocomposites," Materials & Design, Vol. 42, 2012, pp. 214-222. 

  12. Kim, Y.H., Murakami, R.I., and Park, S.J., Advanced Composites Engineering and Its Nano-Bridging Technology, World Scientific Pub. Co., Singapore, 2021. 

  13. Kim, Y.H., Park, S.J., Choi, J.S., Moon, K.M., and Bae, C.W.,?"Effects of Heat-treated HNTs on the Mechanical Properties of?GFRP under Moisture Absorption," International Journal of?Modern Physics B, Vol. 32, No. 19, 2018, 1840070. 

  14. Safri, S.N.A., Sultan, M.T.H., Yidris, N., and Mustapha, F., "Low?Velocity and High Velocity Impact Test on Composite Materials-a Review," International Journal of Engineering Science, Vol. 3,?No. 9, 2014, pp. 50-60. 

  15. Hwang, B.K., Bae, J.H., and Lee, J.M., "Thermal Performance?and Impact Resistance Evaluations of Composite Insulation?Mat Reinforced Polyurethane Foam," Composite Research, Vol.?32, No. 5, 2019, pp. 290-295. 

  16. Sarasini, F., Tirillo, J., Ferrante, L., Valente, M., Valente, T., Lampani, L., Gaudenzi, P., Cioffi, S., Iannace, S., and Sorrentino, L.,?"Drop-weight Impact Behaviour of Woven Hybrid Basalt-carbon/epoxy Composites," Composites Part B: Engineering, Vol.?59, 2014, pp. 204-220. 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로