최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.33 no.1, 2024년, pp.43 - 49
천정필 (조선대학교 일반대학원 기계공학과) , 안동규 (조선대학교 기계공학과)
A high strength steel sheet (HSSS) has widely used to improve the specific rigidity of parts and the safety of the passenger in automotive industries. However, the HSSS is difficult to manufacture precise parts through a forming process due to the reduced elongation and the increased elastic recover...
M. J. Choi, M. J. Song, S. H. Jang, 2001, A Study of Optimization on Vehicle Body Stiffness Using CAE Application, Trans. Korean Soc. Automot. Eng. Vol. 9, No. 6, pp. 129~134.?
S. Rosenthal, F. Maab, M. Kamaliev, M. Hahn, S. Gies, A. E. Tekkaya, 2020, Lightweigth in Automotive Components by Forming Technology, Automot. Innov., Vol. 3, 195~209, https://doi.org/10.1007/s42154-020-00103-3?
C. M. Lee, J. H. Kim, W. J. Oh, B. H. Ryu, 2017, A Study on the Analysis for Upper Seat Track of Automobile Using 1180 MPa Ultra-High Strength Steel, J. Korean Soc. Precis. Eng. Vol 34, No. 8, pp. 525~531, https://doi.org/10.7736/KSPE.2017.34.8.525?
W. Zhang, J. Xu, 2022, Advanced Lightweight Materials for Automobiles: A Review, Mater. Des. Vol. 221, 110994, https://doi.org/10.1016/j.matdes.2022.110994?
B. Chongthairungruang, V. Uthaisangsuk, S. Suranuntchai, S. Jirathearanat, Springback Prediction in Sheet Metal Forming of High Strength Steels, Mater. Des. Vol. 50, pp. 253~266, https://doi.org/10.1016/j.matdes.2013.02.060?
D. C. Ko, J. H. An, M. J. Jang, J. H. Bae, C. H. Kim, B. M. Kim, 2008, Process Design of Seat Rail in Automobile by the Advanced High Strength Steel of DP780, Trans. Mater. Process. Vol. 17, No. 3, pp. 197~202.?
L. Komgrit, H. Hamasaki, R. Hino, F. Yoshida, 2016, Elimination of Springback of High-strength Steel Sheet by Using Additional Bending with Counter Punch, J. Mater. Process. Technol., Vol. 229, pp. 199-206, https://doi.org/10.1016/j.jmatprotec.2015.08.029?
D. G. Ahn, D. H. Song, G. B. Noh, G. Y. Han, 2009, Stamping Die Design of Inner Reinforcement Panel for Automotive, Korean Soc. Manuf. Process. Eng., Vol. 8, No. 2, pp. 54~61.?
X. A. Yang, F. Ruan, 2011, A Die Design Method for Springback Compensation Based on Displacement Adjustment, Int. J. Mech. Sci., Vol. 53, No. 5, pp. 399~406, https://doi.org/10.1016/j.ijmecsci.2011.03.002?
JMATPro, 2022, https://www.sentesoftware.co.uk/jmatpro?
Z. Andrija, T. Zvonimir, C. Damjan, H. Francois, 2022, Indentifiability of Ludwick's Law Parameter Depending on the Sample Geometry via Inverse Identification Procedure, Coupled Systems Mechanics, Vol. 11, No. 2, pp. 133~149, https://hal.science/hal-03482356/document?
J. Lian, F. Shen, X. Jia, D.-C. Ahn, D.-C. Chae, S. Munstermann, W. Bleck, 2018, An Evolving Non-associated Hill48 Plasticity Model Accounting for Anisotropic Hardening and R-value Evolution and Its Application to Forming Limit Prediction, Int. J. Solids Struct., 151, pp. 20~44, https://doi.org/10.1016/j.ijsolstr.2017.04.007?
S. Jadhav, M. Schoiswohl, B. Buchmayr, 2018, Applications of Finite Element Simulation in the Development of Advanced Sheet Metal Forming Processes, Berg Huettenmaenn Monatsh, 163, pp. 109~118, https://doi.org/10.1007/s00501-018-0713-0
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.