최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국전산구조공학회논문집 = Journal of the computational structural engineering institute of Korea, v.37 no.1, 2024년, pp.33 - 40
서지우 (연세대학교 건설환경공학과) , 박주현 (연세대학교 건설환경공학과) , 한동석 (연세대학교 건설환경공학과)
The volume of shells, a prominent form of marine waste, is steadily increasing each year. However, a significant portion of these shells is either discarded or left near coastlines, posing environmental and social concerns. Utilizing shells as a substitute for traditional aggregates presents a poten...
ASTM, C. (2015) Standard Practice for Capping Cylindrical?Concrete Specimens, C617M-15, 33.
BSI, B. (1983) Testing Concrete: Part 120-Method for Determination?of Compressive Strength of Concrete Cores, British Standards?Institution, London.
Chen, M., Li, L., Zheng, Y., Zhao, P., Lu, L., Cheng, X. (2018)?Rheological and Mechanical Properties of Admixtures Modified?3D Printing Sulphoaluminate Cementitious Materials, Constr.?& Build. Mater., 189, pp.601~611.
EN, B. (2009) Testing Hardened Concrete, Tensile Splitting?Strength of Test Specimens, British Standards Institution,?12390-6.
Gao, Y., De Schutter, G., Ye, G. (2013) Micro-and Meso-Scale?Pore Structure in Mortar in Relation to Aggregate Content,?Cem. & Concr. Res., 52, pp.149~160.
Han, T.-S., Zhang, X., Kim, J.-S., Chung, S.-Y., Lim, J.H.,?Linder, C. (2018) Area of Lineal-Path Function for Describing?the Pore Microstructures of Cement Paste and Their Relations?to the Mechanical Properties Simulated from µ-CT Microstructures,?Cem. & Concr. Compos., 89, pp.1~17.
Hirsch, T., Dorn, T., Ehm, C., Stephan, D. (2020) Comparison of?Printable Inorganic Binders-Key Properties for 3D Printable?Materials, Second RILEM International Conference on Concrete?and Digital Fabrication, 28, pp.53~63.
Kim, J.H., Chung, C.W., Lee, J.Y. (2014) Effects of Crushed?Shells on the Physical Properties of Cement Mortar, J. Korea?Iinst. Build. Constr., 14(1), pp.94~101.
Kim, J.-S., Lim, J.H., Stephan, D., Park, K., Han, T.-S. (2022a)?Mechanical behavior Comparison of Single and Multiple?Phase Models for Cement Paste using Micro-CT Images and?Nanoindentation, Constr. & Build. Mater., 342, p.127938.
Kim, J.S., Suh, J., Pae, J., Moon, J., Han, T.S. (2022b) Gradient-based Phase Segmentation Method for Characterization of?Hydrating Cement Paste Microstructures Obtained from?X-ray Micro-CT, J. Build. Eng., 46, p.103721.
Kjellsen, K.O., Monsoy, A., Isachsen, K., Detwiler, R.J. (2003)?Preparation of Flat-Polished Specimens for SEM-Backscattered?Electron Imaging and X-ray Microanalysis-Importance of?Epoxy Impregnation, Cem. & Concr. Res., 33(4), pp.611~616.
Kuo, W.T., Wang, H.Y., Shu, C.Y., Su, D.S. (2013) Engineering?Properties of Controlled Low-Strength Materials Containing?Waste Oyster Shells, Constr. & Build. Mater., 46, pp.128~133.
Le, T.T., Austin, S.A., Lim, S., Buswell, R.A., Law, R., Gibb, A.?G., Thorpe, T. (2012) Hardened Properties of High-performance?Printing Concrete, Cem. & Concr. Res., 42(3), pp.558~566.
Lee, M.J. (1999) Study on the Factor of Water Retention?Capacity of Cement Mortar by Hydroxyalkyl Methylcellulose?Ether, J. Korea Concr. Inst., 34(2), pp.153~160.
Liu, C., Chen, Y., Zhang, Z., Niu, G., Xiong, Y., Ma, L., Fu, Q.,?Chen, C., Banthia, N., Zhang, Y. (2022) Study of the Influence?of Sand on Rheological Properties, Bubble Features and Buildability of Fresh Foamed Concrete for 3D Printing, Constr. &?Build. Mater., 356, p.129292.
Long, W.J., Lin, C., Tao, J.L., Ye, T.H., Fang, Y. (2021)?Printability and Particle Packing of 3D-Printable Limestone?Calcined Clay Cement Composites, Constr. & Build. Mater.,?282, p.122647.
Lyu, K., She, W., Miao, C., Chang, H., Gu, Y. (2019) Quantitative?Characterization of Pore Morphology in Hardened Cement?Paste Via SEM-BSE Image Analysis, Constr. & Build. Mater.,?202, pp.589~602.
Ma, G., Li, Z., Wang, L. (2018) Printable Properties of Cementitious?Material Containing Copper Tailings for Extrusion based 3D?Printing, Constr. & Build. Mater., 162, pp.613~627.
Mo, K.H., Alengaram, U.J., Jumaat, M.Z., Lee, S.C., Goh, W.I.,?Yuen, C.W. (2018) Recycling of Seashell Waste in Concrete:?A Review, Constr. & Build. Mater., 162, pp.751~764.
Moeini, M.A., Hosseinpoor, M., Yahia, A. (2020) Effectiveness?of the Rheometric Methods to Evaluate the Build-up of?Cementitious Mortars used for 3D Printing, Constr. & Build.?Mater., 257, p.119551.
Safi, B., Saidi, M., Daoui, A., Bellal, A., Mechekak, A., Toumi,?K. (2015) The use of Seashells as a Fine Aggregate (by sand?substitution) in Self-Compacting Mortar (SCM), Constr. &?Build. Mater., 78, pp.430~438.
Torquato, S., Haslach Jr, H.W. (2002) Random Heterogeneous?Materials: Microstructure and Macroscopic Properties, Appl.?Mech. Rev., 55(4), pp.B62~B63.
Wolfs, R.J. M., Bos, F.P., Salet, T.A.M. (2019) Hardened?Properties of 3D Printed Concrete: The Influence of Process?Parameters on Interlayer Adhesion, Cem. & Concr. Res., 119,?pp.132~140.
Wu, S., Sun, K., Zhao, H ., Zhang, F. (2018) Quantitative?Invalidation Characterization of Portland Cement based on?BSE and EDS Analysis, Constr. & Build. Mater., 158, pp.?700~706.
Yang, E.I., Yi, S.T., Leem, Y.M. (2005) Effect of Oyster Shell?Substituted for Fine Aggregate on Concrete Characteristics:?Part I. Fundamental Properties, Cem. & Concr. Res., 35(11),?pp.2175~2182.
Zhang, C., Hou, Z., Chen, C., Zhang, Y., Mechtcherine, V., Sun,?Z. (2019) Design of 3D Printable Concrete based on the?Relationship between Flowability of Cement Paste and Optimum?Aggregate Content, Cem. & Concr. Compos., 104, p.103406.
Zhou, L., Gou, M., Zhang, H. (2023) Investigation on the?Applicability of Bauxite Tailings as Fine Aggregate to Prepare?3D Printing Mortar, Constr. & Build. Mater., 364, p.129904.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.