최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기CIRP annals ... manufacturing technology, v.42 no.2, 1993년, pp.733 - 738
Tlusty, J.
Applications of High Speed Milling to face milling of cast iron with silicon nitride tools, to end milling of aluminum aircraft structures, to end milling of titanium fan blades and to end milling of hardened steel dies are described. A case of High Speed Grinding of gears is also introduced. The pr...
CIRP Annals Tlusty 27/2 1978 “Analysis of the State of Research in Cutting Dynamics”
S.A. Tobias, W. Fishwick, “Theory of Regenerative Machine Tool Chatter”, The Engineer, Feb. 1958
Weck 1984 “Handbook of Machine Tools”
Tlusty 1985 “Machine Dynamics” in Handbook of High Speed Machining Technology
“Stability Lobes in Milling” CIRP Annals Tlusty 32/1 309 1983 10.1016/S0007-8506(07)63411-8
“Stabilizing Chatter by Automatic Spindle Speed Regulation” CIRP Annals Smith 41 1 1992
S. Smith, J. Tlusty, “Efficient Simulation Programs for Chatter in Milling”
Int. J. Mach. Tools Manufact. Jedrzejewski 28 No. 4 1988 10.1016/0890-6955(88)90054-5 “Effect of Thermal Contact Resistance on Thermal Behavior of the Spindle Radial Bearings”
Industrie Anzeiger Koenig 37 1991 “CBN erfolgreich eingesetzt”
CIRP Annals Koren 41/2 1992 “Advanced Controls for Feed Drives”
CIRP Annals Week 39/1 1990 “Sharp Corner Tracking Using the IKF Control Strategy”
CIRP Annals Week 40/1 1991 “Optimization of Large Composite Structures”
S. Bjorklund, M. Lenner “High Speed Machining”. Special communication by G. Sohlemius.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.