LCP aromatic polyesters by esterolysis melt polymerization
Journal of polymer science Part A, Polymer chemistry ,
v.38 no.19 ,
2000년, pp.3586 - 3595
Choi, Woon-Seop
(C. S. Marvel Laboratories, Department of Chemistry, The University of Arizona, Tucson, Arizona 85721-0041)
,
Padias, Anne Buyle
(C. S. Marvel Laboratories, Department of Chemistry, The University of Arizona, Tucson, Arizona 85721-0041)
,
Hall Jr., H. K.
(C. S. Marvel Laboratories, Department of Chemistry, The University of Arizona, Tucson, Arizona 85721-0041)
Polyarylates have previously been synthesized from acetate esters via esterolysis (loss of methyl acetate). This polycondensation can be extended to p-substituted aromatic monomers for liquid crystal polyesters (LCPs). For AB-type polymers, methyl p-acetoxybenzoate and methyl 6-acetoxynaphthoate wer...
Polyarylates have previously been synthesized from acetate esters via esterolysis (loss of methyl acetate). This polycondensation can be extended to p-substituted aromatic monomers for liquid crystal polyesters (LCPs). For AB-type polymers, methyl p-acetoxybenzoate and methyl 6-acetoxynaphthoate were copolymerized to an LCP with reasonable molecular weights. Benzoate esters, methyl 4-benzoyloxybenzoate (MBB) and methyl 6-benzoyloxy-2-naphthoate (MBN), are also investigated. Several tin and antimony oxide catalysts were effective. The rate of esterolysis polymerization of MBB and MBN is slower than that of the corresponding acidolysis melt polymerization, but fast enough to give relatively high-molecular-weight polymers and similar thermal stability as commercial LCP prepared by acidolysis. Using these alternative benzoyloxy groups significantly reduced the color problem, because ketene loss cannot occur. Esterolysis melt polymerizations leading to AB/AABB-type LCPs were performed using either dimethyl 2,6-naphthalene dicarboxylate (DMND) or dimethyl terephthalate (DMT) with methyl 4-acetoxybenzoate and phenylhydroquinone diacetate with tin and antimony catalysts. DMT-based monomer compositions show much faster polymerization than DMND-based compositions using antimony oxide catalyst. All these LCPs show a Tg in the 140–170 °C range as a result of the inclusion of the naphthalene and/or phenyl hydroquinone units in the polymer chain. Compositions completely off-balanced on either side still lead to relatively high-molecular-weight copolyesters because either excess monomer can be removed during polymerization. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3586–3595, 2000Graphic AbstractLiquid crystal aromatic polyesters were prepared from methyl 4-benzoyloxybenzoate and methyl 6-benzoyl-2-naphthoate by esterolysis using tin or antimony catalysts. Using benzoate esters instead of acetates significantly reduced the color problem.
Polyarylates have previously been synthesized from acetate esters via esterolysis (loss of methyl acetate). This polycondensation can be extended to p-substituted aromatic monomers for liquid crystal polyesters (LCPs). For AB-type polymers, methyl p-acetoxybenzoate and methyl 6-acetoxynaphthoate were copolymerized to an LCP with reasonable molecular weights. Benzoate esters, methyl 4-benzoyloxybenzoate (MBB) and methyl 6-benzoyloxy-2-naphthoate (MBN), are also investigated. Several tin and antimony oxide catalysts were effective. The rate of esterolysis polymerization of MBB and MBN is slower than that of the corresponding acidolysis melt polymerization, but fast enough to give relatively high-molecular-weight polymers and similar thermal stability as commercial LCP prepared by acidolysis. Using these alternative benzoyloxy groups significantly reduced the color problem, because ketene loss cannot occur. Esterolysis melt polymerizations leading to AB/AABB-type LCPs were performed using either dimethyl 2,6-naphthalene dicarboxylate (DMND) or dimethyl terephthalate (DMT) with methyl 4-acetoxybenzoate and phenylhydroquinone diacetate with tin and antimony catalysts. DMT-based monomer compositions show much faster polymerization than DMND-based compositions using antimony oxide catalyst. All these LCPs show a Tg in the 140–170 °C range as a result of the inclusion of the naphthalene and/or phenyl hydroquinone units in the polymer chain. Compositions completely off-balanced on either side still lead to relatively high-molecular-weight copolyesters because either excess monomer can be removed during polymerization. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3586–3595, 2000Graphic AbstractLiquid crystal aromatic polyesters were prepared from methyl 4-benzoyloxybenzoate and methyl 6-benzoyl-2-naphthoate by esterolysis using tin or antimony catalysts. Using benzoate esters instead of acetates significantly reduced the color problem.
주제어
참고문헌 (15)
Adv Polym Sci Dobb 60/61 61 1984 10.1007/3-540-12994-4_2
Adv Polym Sci Ober 59 103 1984 10.1007/3-540-12818-2_8
Comprehensive Polymer Science Percec 1 1992 ; In Comprehensive Polymer Science, Suppl. Vol. 1; ; Eds.; Pergamon Press: Oxford, 1992.
Macromolecules Han 29 833 1996
J Polym Sci Polym Chem Ed LeBlanc 30 2321 1992 10.1002/pola.1992.080301105
Macromolecules Han 29 1874 1996 10.1021/ma951291c
J Polym Sci Polym Chem Ed Oishi 30 83 1992 10.1002/pola.1992.080300110
Macromolecules Han 30 8205 1997 10.1021/ma970711q
J Appl Polym Sci Mahajan 6 2297 1996 10.1002/(SICI)1097-4628(19960926)61:13<2297::AID-APP8>3.0.CO;2-7
; U. S. Patent 5 731 401, 1998;
; Jpn. Patent 093310, 1997;
; ; ; Jpn. Patent 093309, 1997.
J Polym Sci Polym Chem Ed Han 37 1703 1999 10.1002/(SICI)1099-0518(19990601)37:11<1703::AID-POLA16>3.0.CO;2-0
J Polym Sci Polym Chem Ed Higashi 19 268 1981
J Am Chem Soc Stanton 119 5075 1997 10.1021/ja970556v
더보기
※ AI-Helper는 부적절한 답변을 할 수 있습니다.