최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society of Precision Engineering, v.36 no.10, 2019년, pp.961 - 967
Kim, Ju-Hwan , Shin, Hyun-Pyo
초록이 없습니다.
Hiroshi, W., Mikio, A., Masato, H., Masato, H., Keisuke, Y., et al., “Development of Ultra-High Speed Single-Cavity Stamping Die,” Japan Aviation Electronics Industry Technical Bulletin, Vol. 26, pp. 1-6, 2006.
Kang, M.-A. and Lyu, M.-Y., “Investigation of the Filling Unbalance and Dimensional Variations in Multi-Cavity Injection Molded Parts,” Polymer Korea, Vol. 32, No. 6, pp. 501-508, 2008.
Kim, J., Hong, S., Kim, J., Heo, Y., Cho, C., et al., “A Study of Press Mechanism Considering Dynamic Balance at High Speed Press,” Proc. of the the Korean Society for Technology of Plasticity Conference, pp. 243-246, 2008.
Jimma, T., Sekine, F.. On high speed precision blanking of IC lead-frames using a progressive die. Journal of materials processing technology, vol.22, no.3, 291-305.
Subramonian, S., Altan, T., Campbell, C., Ciocirlan, B.. Determination of forces in high speed blanking using FEM and experiments. Journal of materials processing technology, vol.213, no.12, 2184-2190.
Chung, J.-K., Cho, W.-S., Lee, T.-S., and Park, C.-W., “Behavior of Punch Deformation in Precision Shearing Process Using Press Die,” Journal of the Korean Society for Precision Engineering, Vol. 17, No. 9, pp. 62-69, 2000.
Kim, Y.-Y. and Lee, D. H., “Local Buckling Analysis of the Punch in stamping Die and Its Design Modification,” Journal of the Korean Society for Precision Engineering, Vol. 16, No. 3, pp. 25-29, 1999.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.