최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Applied sciences, v.10 no.19, 2020년, pp.6757 -
Yilmaz, Bengisu , Asokkumar, Aadhik , Jasiūnienė, Elena , Kažys, Rymantas Jonas
The objective of this study is to compare the performance of different ultrasonic non-destructive testing (NDT) techniques for bonding quality evaluation. Aluminium-epoxy-aluminium single lap joints containing debonding in the form of release film inclusions have been investigated using three types ...
Tornow, Christian, Schlag, Mareike, Lima Junior, Luiz Cezar Miranda, Stübing, Dorothea, Hoffmann, Michael, Noeske, Paul-Ludwig Michael, Brune, Kai, Dieckhoff, Stefan. Quality assurance concepts for adhesive bonding of composite aircraft structures - characterisation of adherent surfaces by extended NDT. Journal of adhesion science and technology, vol.29, no.21, 2281-2294.
Asif, Muhammad, Khan, Muhammad A, Khan, Sohaib Z, Choudhry, Rizwan S, Khan, Kamran A. Identification of an effective nondestructive technique for bond defect determination in laminate composites-A technical review. Journal of composite materials, vol.52, no.26, 3589-3599.
Jie Zhang, Drinkwater, B., Wilcox, P.. Defect characterization using an ultrasonic array to measure the scattering coefficient matrix. IEEE transactions on ultrasonics, ferroelectrics, and frequency control, vol.55, no.10, 2254-2265.
Raišutis, Renaldas, Kažys, Rymantas, Mažeika, Liudas. Application of the ultrasonic pulse-echo technique for quality control of the multi-layered plastic materials. NDT & E international : independent nondestructive testing and evaluation, vol.41, no.4, 300-311.
Titov, Sergey A., Maev, Roman Gr., Bogachenkov, Alexey N.. Pulse-echo NDT of adhesively bonded joints in automotive assemblies. Ultrasonics, vol.48, no.6, 537-546.
Tamborrino, R., Palumbo, D., Galietti, U., Aversa, P., Chiozzi, S., Luprano, V.A.M.. Assessment of the effect of defects on mechanical properties of adhesive bonded joints by using non destructive methods. Composites. Part B, Engineering, vol.91, 337-345.
Galy, J., Moysan, J., El Mahi, A., Ylla, N., Massacret, N.. Controlled reduced-strength epoxy-aluminium joints validated by ultrasonic and mechanical measurements. International journal of adhesion and adhesives, vol.72, 139-146.
Wood Ultrasonic Evaluation of Artificial Kissing Bonds in CFRP Composites E-J. Nondestruct. Test. 2014 19 1
Jasiūnienė, Elena, Mažeika, Liudas, Samaitis, Vykintas, Cicėnas, Vaidotas, Mattsson, David. Ultrasonic non-destructive testing of complex titanium/carbon fibre composite joints. Ultrasonics, vol.95, 13-21.
Yılmaz, Bengisu, Jasiūnienė, Elena. Advanced ultrasonic NDT for weak bond detection in composite-adhesive bonded structures. International journal of adhesion and adhesives, vol.102, 102675-.
Jasiūnienė, E., Žukauskas, E., Dragatogiannis, D.A., Koumoulos, E.P., Charitidis, C.A.. Investigation of dissimilar metal joints with nanoparticle fillers. NDT & E international : independent nondestructive testing and evaluation, vol.92, 122-129.
Yonathan Sunarsa, Timotius, Aryan, Pouria, Jeon, Ikgeun, Park, Byeongjin, Liu, Peipei, Sohn, Hoon. A Reference-Free and Non-Contact Method for Detecting and Imaging Damage in Adhesive-Bonded Structures Using Air-Coupled Ultrasonic Transducers. Materials, vol.10, no.12, 1402-.
Wu, Wen-Lin, Wang, Xing-Guo, Huang, Zhi-Cheng, Wu, Nan-Xing. Measurements of the weak bonding interfacial stiffness by using air-coupled ultrasound. AIP advances, vol.7, no.12, 125316-.
Kažys, R., Demčenko, A., Žukauskas, E., Mažeika, L.. Air-coupled ultrasonic investigation of multi-layered composite materials. Ultrasonics, vol.44, no.suppl, e819-e822.
Cerniglia, D., Montinaro, N., Nigrelli, V.. Detection of Disbonds in Multi-layer Structures by Laser-Based Ultrasonic Technique. The Journal of adhesion, vol.84, no.10, 811-829.
Kazys, Rymantas Jonas, Mazeika, Liudas, Sestoke, Justina. Development of Ultrasonic Techniques for Measurement of Spatially Non-Uniform Elastic Properties of Thin Plates by Means of a Guided Sub-Sonic A0 Mode. Applied sciences, vol.10, no.9, 3299-.
Zhang, Kuanshuang, Zhou, Zhenggan. Quantitative characterization of disbonds in multilayered bonded composites using laser ultrasonic guided waves. NDT & E international : independent nondestructive testing and evaluation, vol.97, 42-50.
Castaings, M.. SH ultrasonic guided waves for the evaluation of interfacial adhesion. Ultrasonics, vol.54, no.7, 1760-1775.
Siryabe, E., Renier, M., Meziane, A., Castaings, M.. The Transmission of Lamb Waves Across Adhesively Bonded lap Joints to Evaluate Interfacial Adhesive Properties. Physics procedia, vol.70, 541-544.
Marks, Ryan, Clarke, Alastair, Featherston, Carol, Paget, Christophe, Pullin, Rhys. Lamb Wave Interaction with Adhesively Bonded Stiffeners and Disbonds Using 3D Vibrometry. Applied sciences, vol.6, no.1, 12-.
Sherafat, M.H., Guitel, R., Quaegebeur, N., Lessard, L., Hubert, P., Masson, P.. Guided wave scattering behavior in composite bonded assemblies. Composite structures, vol.136, 696-705.
Leiderman, R., Figueroa, J.C., Braga, A.M.B., Rochinha, F.A.. Scattering of ultrasonic guided waves by heterogeneous interfaces in elastic multi-layered structures. Wave motion, vol.63, 68-82.
Leiderman, Ricardo, Braga, Arthur M.B.. Scattering of guided waves by defective adhesive bonds in multilayer anisotropic plates. Wave motion, vol.74, 93-104.
Cho, H, Hara, Y, Matsuo, T. Evaluation of the Thickness and Bond Quality of Three-Layered Media using Zero-Group-Velocity Lamb Waves. Journal of physics. Conference series, vol.520, no.1, 012023-.
Duczek, S., Joulaian, M., Düster, A., Gabbert, U.. Numerical analysis of Lamb waves using the finite and spectral cell methods. International journal for numerical methods in engineering, vol.99, no.1, 26-53.
Felice, Maria V., Fan, Zheng. Sizing of flaws using ultrasonic bulk wave testing: A review. Ultrasonics, vol.88, 26-42.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.