최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Optics and laser technology, v.138, 2021년, pp.106889 -
Li, Maojun (Corresponding author.) , Chen, Limei , Yang, Xujing
Abstract High-power fiber laser as an emerging technology has been developed for machining composite sheets (less than 5.0 mm thick) with relatively high efficiency, while very limited works are reported when using fiber laser to cut thick CFRP plates. In order to further explore the cutting capabi...
Int. J. Adv. Manuf. Technol. El-Hofy 101 2965 2019 10.1007/s00170-018-2978-6 Laser beam machining of carbon fiber reinforced composites: a review
Chin. J. Aeronaut. An CJA1683 1 2020 Machining of SiC ceramic matrix composites: a review
Int. J. Mach. Tool Manuf. Karpat 56 79 2012 10.1016/j.ijmachtools.2012.01.001 Mechanistic force modeling for milling of unidirectional carbon fiber reinforced polymer laminates
Compos. Struct. An 253 2020 10.1016/j.compstruct.2020.112794 Investigation on the cutting responses of CFRP/Ti stacks: with special emphasis on the effects of drilling sequences
Int. J. Adv. Manuf. Technol. Li 100 623 2019 10.1007/s00170-018-2728-9 Effect of lay-up configuration and processing parameters on surface quality during fiber laser cutting of CFRP laminates
Arch. Civ. Mech. Eng. Chen 20 61 2020 10.1007/s43452-020-00064-8 Thermal defect characterization and heat conduction modeling during fiber laser cutting carbon fiber reinforced polymer laminates
Int. J. Mach. Tool Manuf. Herzog 48 1464 2008 10.1016/j.ijmachtools.2008.04.007 Investigations on the thermal effect caused by laser cutting with respect to static strength of CFRP
Opt. Laser Technol. Li 107 443 2018 10.1016/j.optlastec.2018.06.025 Fiber laser cutting of CFRP laminates with single- and multi-pass strategy: a feasibility study
Comp. A Appl. Sci. Manuf. Riveiro 43 1400 2012 10.1016/j.compositesa.2012.02.012 Experimental study on the CO2 laser cutting of carbon fiber reinforced plastic composite
Appl. Phys. A-Mater. Salama 122 73 2016 10.1007/s00339-016-9607-8 High-power picosecond laser drilling/machining of carbon fibre-reinforced polymer (CFRP) composites
J. Compos. Mater. Hu 50 2861 2016 10.1177/0021998315614990 Pocket milling of carbon fiber-reinforced plastics using 532-nm nanosecond pulsed laser: an experimental investigation
Arch. Civ. Mech. Eng. Li 19 1511 2019 10.1016/j.acme.2019.08.005 Thermal damage of CFRP laminate in fiber laser cutting process and its impact on the mechanical behavior and strain distribution
Phys. Proc. Bluemel 83 328 2016 10.1016/j.phpro.2016.08.034 Laser cutting of CFRP with a fiber guided high power nanosecond laser source-influence of the optical fiber diameter on quality and efficiency
Int. J. Mach. Tool Manuf. Cenna 42 105 2002 10.1016/S0890-6955(01)00090-6 Analysis and prediction of laser cutting parameters of fiber reinforced plastics (FRP) composite materials
Comp. A Appl. Sci. Manuf. Takahashi 84 114 2016 10.1016/j.compositesa.2015.12.009 Heat conduction analysis of laser CFRP processing with IR and UV laser light
Phys. Proc. Goeke 5 253 2010 10.1016/j.phpro.2010.08.051 Influence of laser cutting parameters on CFRP part quality
Comp. A Appl. Sci. Manuf. Li 41 1403 2010 10.1016/j.compositesa.2010.05.017 Study on UV laser machining quality of carbon fibre reinforced composites
Mater. Design. Herzog 92 742 2016 10.1016/j.matdes.2015.12.056 Laser cutting of carbon fiber reinforced plastics of high thickness
Phys. Proc. Weber 12 302 2011 10.1016/j.phpro.2011.03.137 Minimum damage in CFRP laser processing
Int. J. Adv. Manuf. Technol. Negarestani 49 553 2010 10.1007/s00170-009-2431-y Nano-second pulsed DPSS Nd: YAG laser cutting of CFRP composites with mixed reactive and inert gases
Phys. Proc. Mucha 56 1208 2014 10.1016/j.phpro.2014.08.036 Calibrated heat flow model for determining the heat conduction losses in laser cutting of CFRP
Appl. Phys. A-Mater. Li 124 270 2018 10.1007/s00339-017-1538-5 Study on fiber laser machining quality of plain woven CFRP laminates
J. Laser Appl. Herzog 27 S28001 2015 10.2351/1.4906304 Laser cutting of carbon fiber reinforced plastic using a 30kW fiber laser
Comp. Struct. Xu 210 715 2019 10.1016/j.compstruct.2018.11.090 Determination of residual stresses in Ti/CFRP laminates after preparation using multiple methods
J. Laser Appl. Canisius 27 2015 10.2351/1.4916532 Laser cutting of carbon fiber-reinforced plastic with an absorber transparent for visible spectrum
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.