참고문헌 (35)

1. Thin-Walled Struct Rossi 83 182 2014 10.1016/j.tws.2014.01.021 Discussion on the use of stainless steel in constructions in view of sustainability 

   상세보기

2. Thin-Walled Struct Gardner 141 208 2019 10.1016/j.tws.2019.04.019 Stability and design of stainless steel structures - Review and outlook 

   상세보기

3. https://www.assda.asn.au/technical-info/environment-health-and-safety/life-cycle-costing. 

4. Eng Struct Nip 32 424 2010 10.1016/j.engstruct.2009.10.005 Cyclic testing and numerical modelling of carbon steel and stainless steel tubular bracing members 

   상세보기

5. J Struct Div Johnson 92 5 97 1966 10.1061/JSDEAG.0001545 Behavior of Stainless Steel columns and Beams 

   상세보기

6. J Constr Steel Res Liu 59 165 2003 10.1016/S0143-974X(02)00031-7 Buckling of stainless steel square hollow section compression members 

   상세보기

7. Int J Steel Struct Kim 15 3 719 2015 10.1007/s13296-015-9017-3 Strength of Channel Bolted Connection with Austenitic Stainless Steel (304 Type) 

   상세보기

8. Eng Struct Huang 163 177 2018 10.1016/j.engstruct.2018.02.012 Design of cold-formed stainless steel circular hollow section columns using direct strength method 

   상세보기

9. J Construct Steel Res Chang 152 105 2019 10.1016/j.jcsr.2018.05.001 Study on cyclic constitutive model and ultra low cycle fracture prediction model of duplex stainless steel 

   상세보기

10. J Constr Steel Res Gardner 64 1207 2008 10.1016/j.jcsr.2008.07.003 Discrete and continuous treatment of local buckling in stainless steel elements 

    상세보기

11. J Constr Steel Res Afshan 152 2 2019 10.1016/j.jcsr.2018.02.019 Standardised material properties for numerical parametric studies of stainless steel structures and buckling curves for tubular columns 

    상세보기

12. J Constr Steel Res Zhao 106 330 2016 Behaviour and design of stainless steel SHS and RHS beam-columns 

13. Thin-Walled Struct Buchanan 130 297 2018 10.1016/j.tws.2018.05.006 Testing, simulation and design of cold-formed stainless steel CHS columns 

    상세보기

14. Thin-Walled Struct Shen 148 2020 10.1016/j.tws.2019.106581 Geometrically non-linear analysis with stiffness reduction for the stability design of stainless steel structures: Application to members and planar frames 

    상세보기

15. Thin-Walled Struct Shen 155 2020 10.1016/j.tws.2020.106939 Flexural stiffness reduction for stainless steel SHS and RHS members prone to local buckling 

    상세보기

16. J Constr Steel Res Sarno 62 93 2006 10.1016/j.jcsr.2005.05.007 Seismic retrofitting of framed structures with stainless steel” 

    상세보기

17. J Constr Steel Res Sarno 64 914 2008 10.1016/j.jcsr.2008.01.027 Seismic response of stainless steel braced frames 

    상세보기

18. J Constr Steel Res Nip 66 1 96 2010 10.1016/j.jcsr.2009.08.004 Extremely low cycle fatigue tests on structural carbon steel and stainless steel 

    상세보기

19. J Constr Steel Res Zhou 122 94 2016 10.1016/j.jcsr.2016.03.006 Experimental study on hysteretic behavior of structural stainless steels under cyclic loading 

    상세보기

20. Eng Struct Zhou 171 72 2018 10.1016/j.engstruct.2018.05.093 Experimental and numerical studies on stainless steel tubular members under axial cyclic loading 

    상세보기

21. Eurocode3, EN 1993-1-4+A1: Design of Steel Structures - Part 1-4: General Rules -Supplementary Rules for Stainless Steels, European Committee for Standardization (CEN), Brussels; 2015. 

22. SEI/ASCE 8-02, Specification for the Design of Cold-formed Stainless Steel Structural Members, American Society of Civil Engineers (ASCE), Reston; 2002. 

23. Thin-walled Struct Kumar 130 347 2018 10.1016/j.tws.2018.06.005 Fracture ductility of hollow circular and square steel braces under cyclic loading 

    상세보기

24. Thin-Walled Struct Ning 136 280 2019 10.1016/j.tws.2018.12.038 Experimental and numerical studies on hysteretic behaviour of stainless steel welded box-section columns 

    상세보기

25. Korean Industrial Standards (KS), Stainless steel pipes for machine and structural purposes, KS D 3536, Korean Agency for Technology and Standards, Seoul, Korea; 2015 (in Korean). 

26. SAC Joint Venture, Protocol for fabrication, inspection, testing, and documentation of beam-column connection tests and other experimental specimens, Rep No SAC/BD-97/02; 1997. 

27. ATC-24, Guidelines for Cyclic Seismic Testing of Components of Steel Structures for Buildings, Report No. ATC-24, Applied Technology Council, Redwood City, CA, USA; 1992. 

28. Earthquake Eng Struct Dyn Fang 49 2 155 2020 10.1002/eqe.3231 Loading protocols for experimental seismic qualification ofmembers in conventional and emerging steel frames 

    상세보기

29. Korean Industrial Standards (KS), Test pieces for tensile test for metallic materials, KS B 0801, Korean Agency for Technology and Standards, Seoul, Korea; 2017 [in Korean]. 

30. Korean Industrial Standards (KS), Method of tensile test for metallic materials, KS D 0802, Korean Agency for Technology and Standards, Seoul, Korea; 2003 [in Korean]. 

31. American Society for Testing and Materials (ASTM), Standard Test Methods for Tension Testing of Metallic Materials. E8/E8M-16a, USA; 2016. 

32. J Constr Steel Res Ashraf 61 1 37 2005 10.1016/j.jcsr.2004.06.001 Strength enhancement of the corner regions of stainless steel cross-sections 

    상세보기

33. Metall Mater Trans A Shrinivas 26A 661 1995 10.1007/BF02663916 Deformation-Induced Martensitic Characteristics in 304 and 316 Stainless Steels during Room-Temperature Rolling 

    상세보기

34. Mater Sci Eng, A Chiu 398 349 2005 10.1016/j.msea.2005.03.096 Jason Fang, Low-cycle fatigue-induced martensitic transformation in SAF 2205 duplex stainless steel 

    상세보기

35. Eurocode3 EN 1993-1-5: Design of Steel Structures - Part 1-5: Plated structural elements, European Committee for Standardization (CEN), Brussels; 2006. 

활용도 Top5 논문

더보기

해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.