[논문]Preparation and Properties of Carbon Fiber/Carbon Nanotube Wet-Laid Composites

Lee, Suhyun; Ko, Kwangduk; Youk, Jiho; Lim, Daeyoung; Jeong, Wonyoung

doi:10.3390/polym11101597

Preparation and Properties of Carbon Fiber/Carbon Nanotube Wet-Laid Composites 원문보기

Polymers, v.11 no.10, 2019년, pp.1597 -

Lee, Suhyun (Human Convergence Technology Group, Korea Institute of Industrial Technology, Ansan 15588, Korea) , Ko, Kwangduk (Human Convergence Technology Group, Korea Institute of Industrial Technology, Ansan 15588, Korea) , Youk, Jiho (Department of Chemical Engineering, Inha University, Incheon 22212, Korea) , Lim, Daeyoung (Human Convergence Technology Group, Korea Institute of Industrial Technology, Ansan 15588, Korea) , Jeong, Wonyoung (Human Convergence Technology Group, Korea Institute of Industrial Technology, Ansan 15588, Korea)

Abstract ▼ AI-Helper

In this study, carbon nanotubes (CNTs) were introduced into carbon fiber (CF) wet-laid composites as functional nano-fillers to fabricate multi-functional composites with improved mechanical, electrical, and thermal properties. It was considered that the wet-laid process was most suitable in order to introduce filler into brittle and rigid carbon fiber substrates, and we established the conditions of the process that could impart dispersibility and bonding between the fibers. We introduced polyamide 6 (PA6) short fiber, which is the same polymeric material as the stacking film, into carbon fiber and CNT mixture to enhance the binding interactions between carbon fiber and CNTs. Various types of CNT-reinforced carbon fiber wet-laid composites with PA6 short fibers were prepared, and the morphology, mechanical and electrical properties of the composites were estimated. As CNT was added to the carbon fiber nonwoven, the electrical conductivity increased by 500% but the tensile strength decreased slightly. By introducing short fibers of the same material as the matrix between CNT-CF wet-laid nonwovens, it was possible to find optimum conditions to increase the electrical conductivity while maintaining mechanical properties.

참고문헌 (27)

Costa A review of welding technologies for thermoplastic composites in aerospace application J. Aerosp. Technol. Manag. São José dos Campos. 2012 4 225
Ageorges Advances in fusion bonding techniques for joining thermoplastic matrix composites: A review Compos. Part A 2001 10.1016/S1359-835X(00)00166-4 32 839

상세보기
Rudolf Induction heating of continuous caron-fibre-reinforced thermoplastics Compos. Part A 2000 10.1016/S1359-835X(00)00094-4 31 1191

상세보기
Ahmed Induction welding of thermoplastic composites-And overview Compos. Part A 2006 10.1016/j.compositesa.2005.10.009 37 1638

상세보기
Botelho Mechanical behavior of carbon fiber reinforced polyamide composites Compos. Sci. Technol. 2003 10.1016/S0266-3538(03)00119-2 63 1843

상세보기
An Mechanical and thermal properties of long carbon fiber-reinforced polyamide 6 composties Fiber. Polym. 2014 10.1007/s12221-014-2355-5 15 2355

상세보기
Sharma Effect of CNTs growth on carbon fibers on the tensile strength of CNTs grown carbon fiber-reinforced polymer matrix composites Compos. Part A 2011 10.1016/j.compositesa.2010.09.008 42 8

상세보기
Bekyarova Multiscale carbon nanotube-carbon fiber reinforcement for advanced epoxy composites Langmuir 2007 10.1021/la062743p 23 3970

상세보기
Lee A facile method for preparing CNT-grafted carbon fibers and improved tensile strength of their composites Compos. Part A 2015 10.1016/j.compositesa.2014.11.015 69 132

상세보기
Kim Property enhancement of carbon fiber/epoxy composite by using carbon nanotubes Compos. Part B 2011 10.1016/j.compositesb.2011.02.005 42 1257

상세보기
Kocsis Recent advances in fiber/matrix interphase engineering for polymer composites Prog. Mater. Sci. 2015 10.1016/j.pmatsci.2015.02.003 73 1

상세보기
Karsli Tensile and thermomechanical properties of short carbon fiber reinforced polyamide 6 composites Compos. Part B 2013 10.1016/j.compositesb.2013.03.023 51 270

상세보기
Liang Mechanical properties crystallization and melting behaviors of carbon fiber-reinforced PA6 composites J. Therm. Anal. Calorim. 2014 10.1007/s10973-013-3184-2 11 209

상세보기
Yoo Effect of graphite and carbon fiber contents on the morphology and properties of thermally conductive composites based on polyamide 6 Polym. Int. 2014 10.1002/pi.4534 63 151

상세보기
Kim Characterization of carbon nanofiber(CNF)/polymer composite coated on cotton fabrics prepared with various circuit patterns Fash. Text. 2018 10.1186/s40691-017-0120-2 5 7

상세보기
Esawi Carbon nanotube reinforced composites: Potential and current challenges Mater. Des. 2007 10.1016/j.matdes.2006.09.022 28 2394

상세보기
Zhao Layer-by-layer grafting CNTs onto carbon fibers surface for enhancing the interfacial properties of epoxy resin composites Compos. Sci. Technol. 2018 10.1016/j.compscitech.2017.11.002 154 28

상세보기
Zhang Interfacial shearing strength and reinforcing mechanisms of an epoxy composite reinforced using a carbon nanotube/carbon fiber hybrid J. Mater. Sci. 2009 10.1007/s10853-009-3484-x 44 3574

상세보기
Shin Electrical and thermal conductivities of carbon fiber composites with high concentrations of carbon nanotubes Int. J. Precis. Eng. Manuf. 2015 10.1007/s12541-015-0063-8 16 465

상세보기
Wang A tunable strain sensor based on a carbon nanotubes/electrospun polyamide 6 conductive nanofibrous network embedded into poly (vinyl alcohol) with self-diagnosis capabilities J. Mater. Chem. C 2017 10.1039/C7TC01123G 5 4408

상세보기
10.1002/app.40923 Zhu, X.D., Zang, C.G., and Jiao, Q.J. (2014). High electrical conductivity of nylon 6 composites obtained with hybrid multiwalled carbon nanotube/carbon fiber fillers. J. Appl. Polym. Sci.

상세보기
Kostopoulos Impact and after-impact properties of carbon fibre reinforced composites enhanced with multi-wall carbon nanotubes Compos. Sci. Technol. 2010 10.1016/j.compscitech.2009.11.023 70 553

상세보기
An Preparation and characterization of carbon nanotube-hybridized carbon fiber to reinforce epoxy composites Mater. Des. 2012 10.1016/j.matdes.2011.07.027 33 197

상세보기
10.1002/app.41968 Zang, C.G., Zhu, X.D., and Jiao, Q.J. (2015). Enhanced mechanical and electrical properties of nylon-6 composite by using carbon fiber/graphene multiscale structure as additive. J. Appl. Polym. Sci.

상세보기
Andrews Carbon nanotube polymer composites Curr. Opin. Solid State Mater. Sci. 2004 10.1016/j.cossms.2003.10.006 8 31

상세보기
Kim Synergistic interfacial reinforcement of carbon fiber/polyamide 6 composites using carbon-nanotube-modified silane coating on ZnO-nanorod-grown carbon fiber Compos. Sci. Technol. 2018 10.1016/j.compscitech.2018.07.015 165 362

상세보기
Godara Influence of carbon nanotube reinforcement on the processing and the mechanical behavior of carbon fiber/epoxy composites Carbon 2009 10.1016/j.carbon.2009.06.039 47 2914

상세보기

LOADING...

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

Preparation and Properties of Carbon Fiber/Carbon Nanotube Wet-Laid Composites 원문보기

Abstract ▼ AI-Helper

참고문헌 (27)

이 논문을 인용한 문헌

연구과제 타임라인

관련 콘텐츠

원문 보기

원문 URL 링크

오픈액세스(OA) 유형

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트

연합인증

Preparation and Properties of Carbon Fiber/Carbon Nanotube Wet-Laid Composites 원문보기

Abstract ▼ AI-Helper

참고문헌 (27)

이 논문을 인용한 문헌

연구과제 타임라인

전체(0) 논문(0) 특허(0) 보고서(0)

전체(0) 논문(0) 특허(0) 보고서(0)

관련 콘텐츠

원문 보기

원문 URL 링크

오픈액세스(OA) 유형

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트