최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국생산제조학회지 = Journal of the Korean Society of Manufacturing Technology Engineers, v.28 no.2, 2019년, pp.79 - 85
Choi, Sang-Joon , Kim, Jae-Seon , Shin, Jae-Hun , Youn, Jae-Woong
초록이 없습니다.
MFG Korea, 2007, Current Status and Future Prospect of Cutting Tool Industry in Korea and Oversea, <http://www.ei.co.kr/content/view.as.p?idx=6626>
Kang, S. K., Song, M. S., Jee W. H., Cheong, K. J. , Chung, S. C., 2007, Drilling Performance of the Diamond Tool, Proceedings of the KSMTE Spring Conference, 617-618
Kwan, W. Y., Chang, S. C., 2008, Drilling Characteristics and Modeling of Diamond Core Drilling Processes, Journal of the Korean society of Manufacturing Technology Engineers 17:4 95-103
Dabade, Uday A., Dapkekar, Dilip, Joshi, Suhas S.. Modeling of chip–tool interface friction to predict cutting forces in machining of Al/SiCp composites. International journal of machine tools & manufacture, vol.49, no.9, 690-700.
Kwan, S. C., 2007, Condition Monitoring of Diamond Drilling Processes, Proceedings of the KSMTE Autumn Conference, 137-142
Kim, K. M., Choi, S. D., Hong, Y. B., 2011, Influence of the Thickness of Diamond Core Drill on the Cutting Force, Proceedings of the KSMPE Spring Conference, 88-89
Zhang, Q.H, Zhang, J.H, Sun, D.M, Wang, G.D. Study on the diamond tool drilling of engineering ceramics. Journal of materials processing technology, vol.122, no.2, 232-236.
Zhou, Li, Huang, Shutao, Xu, Lifu, Bai, Dashan, Zhao, Peng. Drilling characteristics of SiCp/Al composites with electroplated diamond drills. International journal of advanced manufacturing technology, vol.69, no.5, 1165-1173.
Tsubota, Toshiki, Tanii, Shunsuke, Ishida, Toshihito, Nagata, Masanori, Matsumoto, Yasumichi. Composite electroplating of Ni and surface-modified diamond particles with silane coupling regent. Diamond and related materials, vol.14, no.3, 608-612.
Liu, Wei, Zhang, Feng-Lin, Lu, Jia-feng, Chen, Jia-hong, Huang, Hui-ping, Zhou, Yu-mei, Tang, Hong-qun. Preparation of Ni3Al bonded diamond core drill with Ni–Cr alloy and its performance on glass–ceramic. Ceramics international, vol.44, no.18, 23080-23087.
Churi, N., 2010, Rotary Ultrasonic Machining of Hard-to-Machine Materials, Department of Industrial and Manufacturing Systems Engineering College of Engineering, Doctor of Philosophy, Kansas State University, USA
Yu, K. H., Cheong, C. Y., 1998, A study on the Precision Cutting Characteristics by the Diamond Tool on the Cutting Distance, Journal of the Korean Society of Manufacturing Technology Engineers, 7:5 127-133
Lee, J. W., 2006, Tool-Wear Characteristics of Ceramic, CBN and Diamond Tools in Turning of the Pre Sintered Low Purity Alumina, Journal of the Korean Society of Precision Engineering, 23:1 80-88
Kim, K. M., Choi, S. D., Kim, G. M., 2010, A Study on the Wearing Behavior of Diamond Tool Used to Machining of Ceramics, Proceedings of the KSMTE Autumn Conference, 108-109
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.