참고문헌 (14)

1. MFG Korea, 2007, Current Status and Future Prospect of Cutting Tool Industry in Korea and Oversea, <http://www.ei.co.kr/content/view.as.p?idx=6626> 

2. Kang, S. K., Song, M. S., Jee W. H., Cheong, K. J. , Chung, S. C., 2007, Drilling Performance of the Diamond Tool, Proceedings of the KSMTE Spring Conference, 617-618 

3. Kwan, W. Y., Chang, S. C., 2008, Drilling Characteristics and Modeling of Diamond Core Drilling Processes, Journal of the Korean society of Manufacturing Technology Engineers 17:4 95-103 

4. Dabade, Uday A., Dapkekar, Dilip, Joshi, Suhas S.. Modeling of chip–tool interface friction to predict cutting forces in machining of Al/SiCp composites. International journal of machine tools & manufacture, vol.49, no.9, 690-700.

   상세보기

5. Kwan, S. C., 2007, Condition Monitoring of Diamond Drilling Processes, Proceedings of the KSMTE Autumn Conference, 137-142 

6. Kim, K. M., Choi, S. D., Hong, Y. B., 2011, Influence of the Thickness of Diamond Core Drill on the Cutting Force, Proceedings of the KSMPE Spring Conference, 88-89 

7. Zhang, Q.H, Zhang, J.H, Sun, D.M, Wang, G.D. Study on the diamond tool drilling of engineering ceramics. Journal of materials processing technology, vol.122, no.2, 232-236.

   상세보기

8. Zhou, Li, Huang, Shutao, Xu, Lifu, Bai, Dashan, Zhao, Peng. Drilling characteristics of SiCp/Al composites with electroplated diamond drills. International journal of advanced manufacturing technology, vol.69, no.5, 1165-1173.

   상세보기

9. Tsubota, Toshiki, Tanii, Shunsuke, Ishida, Toshihito, Nagata, Masanori, Matsumoto, Yasumichi. Composite electroplating of Ni and surface-modified diamond particles with silane coupling regent. Diamond and related materials, vol.14, no.3, 608-612.

   상세보기

10. Liu, Wei, Zhang, Feng-Lin, Lu, Jia-feng, Chen, Jia-hong, Huang, Hui-ping, Zhou, Yu-mei, Tang, Hong-qun. Preparation of Ni₃Al bonded diamond core drill with Ni–Cr alloy and its performance on glass–ceramic. Ceramics international, vol.44, no.18, 23080-23087.

    상세보기

11. Churi, N., 2010, Rotary Ultrasonic Machining of Hard-to-Machine Materials, Department of Industrial and Manufacturing Systems Engineering College of Engineering, Doctor of Philosophy, Kansas State University, USA 

12. Yu, K. H., Cheong, C. Y., 1998, A study on the Precision Cutting Characteristics by the Diamond Tool on the Cutting Distance, Journal of the Korean Society of Manufacturing Technology Engineers, 7:5 127-133 

13. Lee, J. W., 2006, Tool-Wear Characteristics of Ceramic, CBN and Diamond Tools in Turning of the Pre Sintered Low Purity Alumina, Journal of the Korean Society of Precision Engineering, 23:1 80-88 

14. Kim, K. M., Choi, S. D., Kim, G. M., 2010, A Study on the Wearing Behavior of Diamond Tool Used to Machining of Ceramics, Proceedings of the KSMTE Autumn Conference, 108-109