참고문헌 (16)

1. Transactions of the Korean Society for Noise and Vibration Engineering KH Park 18 1 47 2008 10.5050/KSNVN.2008.18.1.047 Park, K. H., Jung, S. J., Wee, H., Kim, J. S., Han, K. S., & Kim, M. H. (2008). A study on the fault detection of auto-transmission according to gear damage. Transactions of the Korean Society for Noise and Vibration Engineering, 18(1), 47-56. 

   원문보기 상세보기

2. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING GI Lee 19 2 265 2018 10.1007/s12541-018-0031-1 Lee, G. I., Gao, J. C., Jung, Y. S., & Kim, J. Y. (2018). Study of heat generation and cutting accuracy depending on spindle rotation speed change in ultra-precision cutting using ECTS. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 19(2), 265-269. 

   상세보기

3. Ultrasonics RB Mignogna 19 4 159 1981 10.1016/0041-624X(81)90095-0 Mignogna, R. B., Green, R. E., Duke, J. C., Henneke, E. G., & Reifsnider, K. L. (1981). Thermographic investigation of high-power ultrasonic heating in materials. Ultrasonics, 19(4), 159-163. 

   상세보기

4. International Journal Of Precision Engineering And Manufacturing ZZ Xu 16 6 1123 2015 10.1007/s12541-015-0145-7 Xu, Z. Z., Kim, J. S., Kim, L. S., Li, D. Y., & Lyu, S. K. (2015). Study on modular modeling and performance evaluation of a conical gear for marine transmission system. International Journal Of Precision Engineering And Manufacturing, 16(6), 1123-1128. 

   상세보기

5. International Journal Of Precision Engineering And Manufacturing ZZ Xu 15 1 123 2014 10.1007/s12541-013-0314-5 Xu, Z. Z., Liu, X. J., & Lyu, S. K. (2014). Study on thermal behavior analysis of nut/shaft air cooling ball screw for high-precision feed drive. International Journal Of Precision Engineering And Manufacturing, 15(1), 123-128. 

   원문보기 상세보기

6. Journal of Mechanical Science and Technology YJ Wu 26 6 1671 2012 10.1007/s12206-012-0416-5 Wu, Y. J., Wang, J. J., & Han, Q. K. (2012). Finite element method for dynamic meshing characteristics analysis of continuous engaged gear drive contact. Journal of Mechanical Science and Technology, 26(6), 1671-1685. 

   원문보기 상세보기

7. Journal of Korean Precision Engineering SY Noh 34 6 371 2017 10.7736/KSPE.2017.34.6.371 Noh, S. Y., Kim, L. S., Cho, S. H., & Lyu, S. K. (2017). Study on the tooth micro-geometry optimization of planetary gear for drive reducer. Journal of Korean Precision Engineering, 34(6), 371-376. 

   원문보기 상세보기

8. International Journal Of Precision Engineering And Manufacturing F Ren 15 9 1925 2014 10.1007/s12541-014-0547-y Ren, F., Qin, D., Lim, T. C., & Lyu, S. K. (2014). Study on dynamic characteristics and load sharing of a herringbone planetary gear with manufacturing errors. International Journal Of Precision Engineering And Manufacturing, 15(9), 1925-1934. 

   원문보기 상세보기

9. Journal of Mechanical Science and Technology JB Ooi 26 2 575 2012 10.1007/s12206-011-1040-5 Ooi, J. B., Wang, X., Tan, C. S., Ho, J. H., & Lim, Y. P. (2012). Modal and stress analysis of gear train design in portal axle using finite element modeling and simulation. Journal of Mechanical Science and Technology, 26(2), 575-589. 

   원문보기 상세보기

10. International Journal Of Precision Engineering And Manufacturing AJ Mertens 17 2 181 2016 10.1007/s12541-016-0023-y Mertens, A. J., & Senthilvelan, S. (2016). Durability of polymer gear-paired with steel gear manufactured by wire cut electric discharge machining and hobbing. International Journal Of Precision Engineering And Manufacturing, 17(2), 181-188. 

    상세보기

11. Journal of Mechanical Science and Technology GY Li 32 7 3081 2018 10.1007/s12206-018-0611-0 Li, G. Y., Liang, X. H., & Li, F. Y. (2018). Model-based analysis and fault diagnosis of a compound planetary gear set with damaged sun gear. Journal of Mechanical Science and Technology, 32(7), 3081-3096. 

    상세보기

12. WIT Transactions on Engineering Sciences IJ Richardson 24 389 1999 Richardson, I. J., Hyde, T. H., Becker, A. A., & Taylor, J. W. (1999). A comparison of two and three dimensional finite element contact analyses of curvic coupling. WIT Transactions on Engineering Sciences, 24, 389-399. 

13. Mathematical Problems in Engineering H Liu 2020 1 2020 Liu, H., Hong, J., Ruan, S., Li, Z., & Cheng, G. D. (2020). A model accounting for stiffness weakening of curvic coupling under various loading conditions. Mathematical Problems in Engineering, 2020, 1-17. 

14. Journal of Aerospace Engineering XJ Jiang 29 3 1 2016 10.1061/(ASCE)AS.1943-5525.0000503 Jiang, X. J., Zhu, Y. S., Hong, J., & Zhu, L. B. (2016). Stiffness analysis of curvic coupling in tightening by considering different bolt structures. Journal of Aerospace Engineering, 29(3), 1-14. 

    상세보기

15. Journal of Mechanical Science and Technology C Huang 27 5 1233 2013 10.1007/s12206-013-0307-4 Huang, C., Wang, J. X., Xiao, K., Li, M., & Li, J. Y. (2013). Dynamic characteristics analysis and experimental research on new type planetary gear apparatus with small tooth number difference. Journal of Mechanical Science and Technology, 27(5), 1233-1244. 

    상세보기

16. International Journal of Precision Engineering And Manufacturing HB He 11 6 937 2010 10.1007/s12541-010-0114-0 He, H. B., Li, H. Y., Xu, Z. Z., Kim, D. U., & Lyu, S. K. (2010). Effect of Mo S2-based composite coatings on tribological behavior and efficiency of gear. International Journal of Precision Engineering And Manufacturing, 11(6), 937-943. 

    원문보기 상세보기