최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Applied sciences, v.11 no.9, 2021년, pp.3779 -
Kang, Sungwook (Precision Mechanical Process and Control R&D Group, Korea Institute of Industrial Technology, Jinju 52845, Korea) , Kim, Hwanjin (Precision Mechanical Process and Control R&D Group, Korea Institute of Industrial Technology, Jinju 52845, Korea) , Kim, Jaewoong (Smart Mobility Materials and Components R&D Group, Korea Institute of Industrial Technology, Gwangju 61012, Korea) , Kim, Hyoungchan (Advanced Energy Materials and Components R&D Group, Korea Institute of Industrial Technology, Busan 46938, Korea) , Jang, Jinseok (Mechanical Components and Materials R&D Group, Korea Institute of Industrial Technology, Daegu 42994, Korea) , Kwak, Byungmoon (Technical Division, MSC Software Korea, Sungnam 13591, Korea) , Choi, Kiseok (Technical Division, MSC Software Korea, Sungnam 13591, Korea) , Jang, Hong-Lae (School of Mechanical Engineering, Changwon National University, Changwon 51140, Korea)
Due to environmental pollution and depletion of fossil fuels, hydrogen is becoming an increasingly practical, clean and environmentally friendly option for transportation and energy storage among all green alternative energy sources introduced. Hydrogen storage and delivery is expensive because of t...
Moradi Hydrogen storage and delivery: Review of the state of the art technologies and risk and reliability analysis Int. J. Hydrog. Energy 2019 10.1016/j.ijhydene.2019.03.041 44 12254
Gerboni Hydrogen transportation systems: Elements of risk analysis Energy 2009 10.1016/j.energy.2008.12.018 34 2223
Son Determination of the autofrettage pressure and estimation of material failures of a Type III hydrogen pressure vessel by using finite element analysis Int. J. Hydrog. Energy 2012 10.1016/j.ijhydene.2012.06.044 37 12771
Marzbanrad Finite element analysis of composite high-pressure hydrogen storage vessels J. Mater. Environ. Sci. 2013 4 63
Liu Numerical simulation and optimal design for composite high-pressure hydrogen storage vessel: A review Renew. Sustain. Energy Rev. 2012 10.1016/j.rser.2012.01.006 16 1817
Han Failure analysis of a Type III hydrogen pressure vessel under impact loading induced by free fall Compos. Struct. 2015 10.1016/j.compstruct.2015.03.027 127 288
Han Evaluation of structural integrity of Type-III hydrogen pressure vessel under low-velocity car-to-car collision using finite element analysis Compos. Struct. 2016 10.1016/j.compstruct.2016.03.060 148 198
Kwak Structure integrity of rack module for compressed natural gas (CNG) pressure vessel-under automotive collision and vibration J. Mech. Sci. Technol. 2016 10.1007/s12206-016-1025-5 30 5073
Park, E.J., Nam, C.H., Choi, S.J., Kim, I.S., and Hwang, J.H. (2019). Structural Analysis of Skid for Hydrogen Transport with Arm-roll System. J. Korean Soc. Automot. Eng., 947-952.
Effect of obstacles in the road profile on the dynamic response of a vehicle Proc. Inst. Mech. Eng. Part D J. Automob. Eng. 2008 10.1243/09544070JAUTO387 222 353
Imine Road profile input estimation in vehicle dynamics simulation Veh. Syst. Dyn. 2006 10.1080/00423110500333840 44 285
Kansake Analytical modelling of dump truck tire dynamic response to haul road surface excitations Int. J. Min. Reclam. Environ. 2020 10.1080/17480930.2018.1507608 34 1
Kansake Multi-body dynamic modelling of ultra-large dump truck-haul road interactions towards haul road design integrity Int. J. Min. Reclam. Environ. 2020 10.1080/17480930.2019.1692414 34 649
Pesterev A novel approach to the calculation of pothole-induced contact forces in MDOF vehicle models J. Sound Vib. 2004 10.1016/S0022-460X(03)00789-2 275 127
Pesterev Pothole-induced contact forces in a simple vehicle model J. Sound Vib. 2002 10.1006/jsvi.2001.4220 256 565
Lombaert The simulation of the impact damage to fruit during the passage of a truck over a speed bump by means of the discrete element method Biosyst. Eng. 2008 10.1016/j.biosystemseng.2008.06.003 101 58
10.3390/app10041293 Zhao, L., Zhang, Y., Yu, Y., Zhou, C., Li, X., and Li, H. (2020). Truck Handling Stability Simulation and Comparison of Taper-Leaf and Multi-Leaf Spring Suspensions with the Same Vertical Stiffness. Appl. Sci., 10.
Zhang Research on ABS of multi-axle truck based on ADAMS/Car and Matlab/Simulink Procedia Eng. 2012 10.1016/j.proeng.2012.04.213 37 120
Prado, M., Cunha, R., Neto, Á., Costa, A., and D’Elboux, J.E. (2001, January 14-15). Bus handling validation and analysis using ADAMS/Car. Proceedings of the 16th European ADAMS User Conference, Berchtesgaden, Germany.
MSC (2015). MSC Adams/Car Truck Help Document, MSC. Available online: https://simcompanion.mscsoftware.com/infocenter/index?page=content&id=DOC10831&cat=1VMO50&actp=LIST.
ANSYS Inc. (2016). ANSYS Mechanical User’s Guide Version 17.1, ANSYS Inc.
Choi A study on durability performance estimation for development of chassis corner module Trans. Korean Soc. Automot. Eng. 2006 14 159
Farrahi Estimation of fatigue damage caused by actual roads and maneuvers on proving ground J. Achiev. Mater. Manuf. Eng. 2006 14 90
10.3390/met10020220 Troina, G.S., Cunha, M.L., Pinto, V.T., Rocha, L.A.O., Dos Santos, E.D., Fragassa, C., and Isoldi, L.A. (2020). Computational Modeling and Design Constructal Theory Applied to the Geometric Optimization of Thin Steel Plates with Stiffeners Subjected to Uniform Transverse Load. Metals, 10.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.