참고문헌 (62)

1. IEA, International Energy Agency: World Energy Outlook 2012 Executive Summary. OECD/IEA-Paris France (2012) 

2. Appl. Energy AS Brouwer 156 107 2015 10.1016/j.apenergy.2015.06.065 Brouwer, A.S., van den Broek, M., Seebregts, A., Faaij, A.: Operational flexibility and economics of power plants in future low-carbon power systems. Appl. Energy 156, 107-128 (2015) 

   상세보기

3. JM Hutchison 1976 ISA Handbook of Control Valves Hutchison, J.M.: ISA Handbook of Control Valves. Instrument Society of America, Research Triangle Park, North Carolina, USA (1976) 

4. LH Johnson 1983 Method for Operating a Steam Turbine with an Overload Valve Johnson, L.H., Couchman, R.S., Spencer, R.C., Booth, J.A., Holman, R.J.: Method for Operating a Steam Turbine with an Overload Valve. General Electric Company, New York, USA (1983) 

5. 10.1002/9781118991978.hces011 Mirandola, A., Stoppato, A., Benato, A.: Steam power generation. In: Handbook of Clean Energy Systems, pp. 1-18 (2015) 

   

6. Mitsubishi Heavy Industries Technical Review E Saito 54 3 10 2017 Saito, E., Nishimoto, S., Endo, H., Yamamoto, R., Kawasaki, K., Sato, J.: Development of 700 °C class steam turbine technology. Mitsubishi Heavy Industries Technical Review 54(3), 10-15 (2017) 

7. Cziesla, F., Bewerunge, J., Senzel, A.: Luenen-state-of-the-art ultra supercritical steam power plant under construction. PowerGen Europe 2009, 26-29 May 2009 Cologne, Germany 

8. PK Bhowmik 2016 Nanofluid Operation and Valve Engineering of SUPER for Small Unit Passive Enclosed Reactor Bhowmik, P.K.: Nanofluid Operation and Valve Engineering of SUPER for Small Unit Passive Enclosed Reactor. Department of Nuclear Engineering, Seoul National University, Seoul, Republic of Korea (2016) 

9. Power-Gen Asia R Quinkertz 2008 17 2008 Quinkertz, R., Ulma, A., Gobrecht, E., Wechsung, M.: USC Steam Turbine technology for maximum efficiency and operational flexibility. Power-Gen Asia 2008, 17 (2008) 

10. Emerson Process Management Control Valve Handbook. 4th edn. Fisher; Control Valve Selection and Sizing. North America, Marshalltown, Iowa, USA (2005) 

11. Nucl. Eng. Des. B Halimi 243 360 2012 10.1016/j.nucengdes.2011.12.014 Halimi, B., Suh, K.Y.: Engineering nonlinearity characteristic compensation for commercial steam turbine control valve using linked MARS code and Matlab Simulink. Nucl. Eng. Des. 243, 360-370 (2012) 

    상세보기

12. Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci. D Zhang 218 493 2004 10.1243/095440604323052283 Zhang, D., Engeda, A., Hardin, J., Aungier, R.: Experimental study of steam turbine control valves. Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci. 218, 493-507 (2004) 

    상세보기

13. Therm. Eng. A Kostyuk 47 529 2000 Kostyuk, A., Kumenko, A., Nekrasov, A., Kalinin, S., Medvedev, S.: An experimental analysis of pressure pulsations in the steam admission elements of a turbine installation. Therm. Eng. 47, 529-537 (2000) 

    상세보기

14. Oberle, A.: Combined emergency stop and governor valve for controlling fluid flow to a turbo-machine, Patents US3809126A. https://patents.google.com/patent/US3809126 (1974) 

15. Araki, T., Kuwashima, H.: Combined valve, Patents US4481776A. https://patents.google.com/patent/US4481776A/en (1984) 

16. Gerdes, R., Padfield, R., Suter, F.: Valve arrangement for a power plant. Google Patents (2003) 

17. Clark, R.B., Kure-Jensen, J., Miyayashiki, H., Ofuji, T.: Combined valve configuration for steam cycle units. New York, USA, Pat. US005870896A (1997) 

18. Davis, D.H., Mossey, J.G.: Combined stop and intercept valve for steam turbines, Patents US4020869A. https://patents.google.com/patent/US4020869A/en (1977) 

19. Therm. Eng. A Zaryankin 56 644 2009 10.1134/S0040601509080047 Zaryankin, A., Chernoshtan, V., Arianov, S., Noskov, V.: Some ways for improving vibration reliability of balanced control valves for steam turbines. Therm. Eng. 56, 644-648 (2009) 

    상세보기

20. Steenburgh, J.H., Clark, R.B., Porteous, N.D.: Combined stop and control valve for supplying steam, Patents US6655409B1 (2003) 

21. Nucl. Eng. Des. YH Yoo 241 4061 2011 10.1016/j.nucengdes.2011.08.014 Yoo, Y.H., Suh, K.Y.: Engineering analysis of mass flow rate for turbine system control and design. Nucl. Eng. Des. 241, 4061-4078 (2011) 

    상세보기

22. Bhowmik, P.K., Shamim, J.A., Suh, K.Y.: Flow characteristics analysis of control valve for turbine system. In: International Conference on Advances in Nuclear Power Plants (ICAPP), PI: 14359, Charlotte, NC, USA, 6-9 April 2014 

23. Bhowmik, P., Shamim, J., Gairola, A., Arif, M., Suh, K.Y.: Numerical analysis of combined valve hydrodynamic characteristics for turbine system. In: Korean Nuclear Society Spring Meeting, Jeju, Korea, May 29-30, 2014 

24. Energy Convers. Manag. B Halimi 65 448 2013 10.1016/j.enconman.2012.09.012 Halimi, B., Kim, S.H., Suh, K.Y.: Engineering of combined valve flow for power conversion system. Energy Convers. Manag. 65, 448-455 (2013) 

    상세보기

25. 10.1109/ICPERE.2014.7067232 Bhowmik, P., Shamim, J., Gairola, A., Suh, K.: Flow characteristics analysis of ultra supercritical overload turbine control valve for power plant. In: The 2nd IEEE Conference on Power Engineering and Renewable Energy (ICPERE) 2014. IEEE, pp. 85-90, Bali, Indonesia, 9-11 December 2014. 

    

26. 10.1115/GT2016-57215 Zeß, J.-P., Polkas, T., Joos, F.: Experimental investigation of flow in a control valve of an industrial steam turbine. In: ASME Turbo Expo: Turbine Technical Conference and Exposition 2016, GT2016-57215, New York, NY (2016) 

    

27. J. Mech. Sci. Technol. SY Kang 30 5759 2016 10.1007/s12206-016-1146-x Kang, S.Y., Lee, J.J., Kim, T.S., Park, S.J., Hong, G.W., Ahn, J.H.: Program development for performance analysis of a steam turbine system with the use of overload valve. J. Mech. Sci. Technol. 30, 5759-5769 (2016) 

    상세보기

28. ASME. J. Eng. Gas Turbines Power CB Domnick 141 5 051009 2018 10.1115/1.4041253 Domnick, C.B., Brillert, D.: Flow-induced steam valve vibrations-A literature review of excitation mechanisms, preventive measures, and design improvements. ASME. J. Eng. Gas Turbines Power 141(5), 051009 (2018) 

    상세보기

29. 10.1063/1.5138624 Kollross, P., Tajč, L.: AIP Conference Proceedings 2189, 020012 (2019); https://doi.org/10.1063/1.5138624 

    

30. ASME J Nucl. Radiat. Sci. V Slama 7 2 021401 2021 10.1115/1.4049055 Slama, V., Mrozek, L., Tajc, L., Klimko, M., Zitek, P.: Flow analysis in a steam turbine control valve with through-flow valve chamber. ASME J Nucl. Radiat. Sci. 7(2), 021401 (2021). https://doi.org/10.1115/1.4049055 

    상세보기

31. 10.1051/epjconf/20122501052 Hajsman, M., Kovandova, D., Matas, R.: Some aspects of numerical simulation of control valves for steam turbines. In: EPJ Web Conferences, vol. 25, p. 01052 (2012) 

    상세보기

32. Energy Convers. Manag. R Amirante 47 1748 2006 10.1016/j.enconman.2005.10.005 Amirante, R., Del Vescovo, G., Lippolis, A.: Evaluation of the flow forces on an open centre directional control valve by means of a computational fluid dynamic analysis. Energy Convers. Manag. 47, 1748-1760 (2006) 

    상세보기

33. J. Adv. Manuf. Syst. XG Song 8 81 2009 10.1142/S0219686709001663 Song, X.G., Wang, L., Park, Y.C.: Fluid and structural analysis of a large diameter butterfly valve. J. Adv. Manuf. Syst. 8, 81-88 (2009) 

    상세보기

34. J. Eng. Gas Turbines Power CB Domnick 137 8 081601 2015 10.1115/1.4029309 Domnick, C.B., Benra, F.-K., Brillert, D., Dohmen, H.J., Musch, C.: Numerical investigation on the time-variant flow field and dynamic forces acting in steam turbine inlet valves. J. Eng. Gas Turbines Power 137(8), 081601 (2015) 

    상세보기

35. J. Fluids Eng. R Morita 129 48 2007 10.1115/1.2375123 Morita, R., Inada, F., Mori, M., Tezuka, K., Tsujimoto, Y.: CFD simulations and experiments of flow fluctuations around a steam control valve. J. Fluids Eng. 129, 48-54 (2007) 

    상세보기

36. Energy Convers. Manag. E Lisowski 123 15 2016 10.1016/j.enconman.2016.06.025 Lisowski, E., Filo, G.: CFD analysis of the characteristics of a proportional flow control valve with an innovative opening shape. Energy Convers. Manag. 123, 15-28 (2016) 

    상세보기

37. Flow Meas. Instrum. E Lisowski 53 269 2017 10.1016/j.flowmeasinst.2016.12.009 Lisowski, E., Filo, G.: Analysis of a proportional control valve flow coefficient with the usage of a CFD method. Flow Meas. Instrum. 53, 269-278 (2017) 

    상세보기

38. Appl. Therm. Eng. P Wang 115 463 2017 10.1016/j.applthermaleng.2016.12.073 Wang, P., Liu, Y.Z.: Influence of a circular strainer on unsteady flow behavior in steam turbine control valves. Appl. Therm. Eng. 115, 463-476 (2017) 

    상세보기

39. Appl. Therm. Eng. P Wang 129 1333 2018 10.1016/j.applthermaleng.2017.10.104 Wang, P., Ma, H., Quay, B., Santavicca, D.A., Liu, Y.Z.: Computational fluid dynamics of steam flow in a turbine control valve with a bell-shaped spindle. Appl. Therm. Eng. 129, 1333-1347 (2018) 

    상세보기

40. J. Eng. Gas Turbines Power P Wang 141 4 41035 2019 10.1115/1.4040903 Wang, P., Ma, H.Y., Liu, Y.Z.: Proper Orthogonal Decomposition and Extended-Proper Orthogonal Decomposition analysis of pressure fluctuations and vortex structures inside a steam turbine control valve. J. Eng. Gas Turbines Power 141(4), 41035 (2019) 

    상세보기

41. Nucl. Eng. Technol. JY Qian 52 10 2173 2020 10.1016/j.net.2020.03.008 Qian, J.Y., Hou, C.W., Mu, J., Gao, Z.X., Jin, Z.J.: Valve core shapes analysis on flux through control valves in nuclear power plants. Nucl. Eng. Technol. 52(10), 2173-2182 (2020) 

    원문보기 상세보기

42. Ann. Nucl. Energy PK Bhowmik 150 107870 2021 10.1016/j.anucene.2020.107870 Bhowmik, P.K., Shamim, J.A., Chen, X., Suh, K.Y.: Rod bundle thermal-hydraulics experiment with water and water-Al2O3 nanofluid for small modular reactor. Ann. Nucl. Energy 150, 107870 (2021) 

    상세보기

43. ASME J. Nucl. Eng. Radiat. Sci. PK Bhowmik 7 031406 2021 10.1115/1.4050211 Bhowmik, P.K., Schlegel, J.P., Kalra, V., Mills, C., Usman, S.: Design of condensation heat transfer experiment to evaluate scaling distortion in small modular reactor safety analysis. ASME J. Nucl. Eng. Radiat. Sci. 7, 031406 (2021) 

    상세보기

44. ANSI/ ISA-75.02-1996: Control Valve Capacity Test Procedures. ISA (1996) 

45. ANSI/ISA-75.01.01-2002. Flow Equations for Sizing Control Valves. ISA (2002) 

46. STAR CCM+ (ver. 9.06.011), and Training Manual, version 05/14, CD-Adapco 

47. CADCIM Technologies, Tickoo S, Raina V. CATIA V5R17 for designers 

48. Renew. Sustain. Energy Rev. MC Barma 79 970 2017 10.1016/j.rser.2017.05.187 Barma, M.C., Saidur, R., Rahman, S.M.A., Allouhi, A., Akash, B.A., Sait, S.M.: A review on boilers energy use, energy savings, and emissions reductions. Renew. Sustain. Energy Rev. 79, 970-983 (2017) 

    상세보기

49. J. Process Control X Liu 66 59 2018 10.1016/j.jprocont.2018.02.010 Liu, X., Cui, J.: Economic model predictive control of boiler-turbine system. J. Process Control 66, 59-67 (2018) 

    상세보기

50. Int. J. Energy Environ. Eng. MM AbouAl-Sood 4 37 2013 10.1186/2251-6832-4-37 AbouAl-Sood, M.M., Matrawy, K.K., Abdel-Rahim, Y.M.: Optimum parametric performance characterization of an irreversible gas turbine Brayton cycle. Int. J. Energy Environ. Eng. 4, 37 (2013). https://doi.org/10.1186/2251-6832-4-37 

    상세보기

51. Int. J. Energy Environ. Eng. E Mollenhauer 7 167 2016 10.1007/s40095-016-0204-6 Mollenhauer, E., Christidis, A., Tsatsaronis, G.: Evaluation of an energy- and exergy-based generic modeling approach of combined heat and power plants. Int. J. Energy Environ. Eng. 7, 167-176 (2016). https://doi.org/10.1007/s40095-016-0204-6 

    상세보기

52. Bhowmik, P.K., Dey, M.: Protection and control of steam turbine generator using PLC. In: First International Conference on Mechanical Engineering and Renewable Energy 2011 (ICMERE2011), Chittagong, Bangladesh, 22-24 December 2011 

53. 10.1109/ICECE.2012.6471702 Bhowmik, P.K., Dhar, S.: Boiler gas burner management system automation using PLC. In: 2012 7th International Conference on Electrical and Computer Engineering, pp. 925-928. IEEE (2012) 

    

54. H Bloch 2008 Steam Turbines: Design, Applications and Re-Rating 2 Bloch, H., Singh, M.: Steam Turbines: Design, Applications and Re-Rating, 2nd edn. McGraw-Hill, New York (2008) 

55. Bhowmik, P.K, Dhar, S., Dey, M., Shamim, J.: Sizing and selection of control valve for process control loop. In: International Conference on Engineering Research, Innovation & Education (2013) 

56. Bhowmik, P.K.: Sizing and selection of pressure relief safety valve. In: Proceedings of the 6th International Mechanical Engineering Conference & 14th Annual Paper Meet (6IMEC&14APM), 28-29 September 2012, Dhaka, Bangladesh (2012) 

57. JD Anderson 2013 Computational Fluid Dynamics: An Introduction Anderson, J.D., Degrez, G., Dick, E., Grundmann, R.: Computational Fluid Dynamics: An Introduction. Springer, Berlin (2013) 

58. Int. J. Rotating Mach. Z Mazur 10 747943 2004 10.1155/S1023621X04000077 Mazur, Z., Urquiza, G., Campos, R.: Improvement of the turbine main stop valves with flow simulation in erosion by solid particle impact CFD. Int. J. Rotating Mach. 10, 747943-747952 (2004) 

    

59. Prog. Nucl. Energy F Ahmed 134 103653 2021 10.1016/j.pnucene.2021.103653 Ahmed, F., Ara, N., Deshpande, V., Mollah, A., Bhowmik, P.: CFD validation with optimized mesh using benchmarking data of pebble-bed high-temperature reactor. Prog. Nucl. Energy 134, 103653 (2021) 

    상세보기

60. Hellström, F.: Numerical computations of the unsteady flow in turbochargers. Ph. D. thesis, Royal Institute of Technology, KTH (2010) 

61. 10.1016/j.protcy.2013.12.555 Dulau, M., Bica, D.: Mathematical modelling and simulation of the behaviour of the steam turbine. In: The 7th International Conference Interdisciplinarity in Engineering, INTER-ENG 2013, Elsevier, Procedia Technology, vol. 12, pp. 723-729 (2014) 

    상세보기

62. 10.1109/PES.2003.1267470 Miller, N., Sanchez-Gasca, J., Price, W., Delmerico, R.: Dynamic modeling of GE 1.5 and 3.6 MW wind turbine-generators for stability simulations. In: 2003 IEEE Power Engineering Society General Meeting (IEEE Cat. No.03CH37491), Toronto, ON, Canada, vol. 3, pp. 1977-1983 (2003). https://doi.org/10.1109/PES.2003.1267470.