[논문]Preparation and Characterization of Glass-Fiber-Reinforced Modified Polyphenylene Oxide by a Direct Fiber Feeding Extrusion Process

Ahn, SeungJae; Lee, Jae-Chul; Kim, Ki-Young

doi:10.3390/app112110266

Preparation and Characterization of Glass-Fiber-Reinforced Modified Polyphenylene Oxide by a Direct Fiber Feeding Extrusion Process 원문보기

Applied sciences, v.11 no.21, 2021년, pp.10266 -

Ahn, SeungJae (Material & Component Convergence R&D Department, Korea Institute of Industrial Technology, 143 Hanggaulro, Sangnok-gu, Ansan 15588, Gyeonggi, Korea) , Lee, Jae-Chul (Material & Component Convergence R&D Department, Korea Institute of Industrial Technology, 143 Hanggaulro, Sangnok-gu, Ansan 15588, Gyeonggi, Korea) , Kim, Ki-Young (Material & Component Convergence R&D Department, Korea Institute of Industrial Technology, 143 Hanggaulro, Sangnok-gu, Ansan 15588, Gyeonggi, Korea)

Abstract ▼ AI-Helper

Polyphenylene oxide (PPO) polymers have good mechanical, electrical, and thermal properties, but they have poor processability owing to their quite high melt viscosity. This hinders the manufacturing processes of fiber-reinforced thermoplastics that have enhanced mechanical and physical properties. Although PPO was modified by blending with polystyrene (PS) or polyamide to improve processability, the modified PPO (mPPO) still had a high melt viscosity compared with other polymers. Thus, the fiber-reinforced mPPO is manufactured by compounding with chopped fiber, while various methods are applied to manufacture the fiber-reinforced polypropylene and polyamide in order to improve properties. One of the methods is a direct fiber feeding method, which can keep the longer fiber length because of a direct and continuous roving yarn feeding without chopping. Therefore, the composite manufactured by the direct fiber feeding method is expected to improve the mechanical properties. Hence, this study aims to investigate the feasibility of a direct fiber feeding extrusion process for manufacturing glass-fiber-reinforced mPPO or GFmPPO. The manufactured GF/mPPO composites exhibited increased tensile and flexural properties as the fiber content increased up to 50 wt% of GF owing to the predominant effects of fiber content. Nevertheless, the larger core area in the cross-section micrograph of the tensile specimen of the GF/mPPO composite with 50 wt% of GF was observed to reduce the fiber efficiency factor for tensile strength. Meanwhile, the impact strength of the GF/mPPO composites decreased with increasing GF content. This is attributed to the insufficient fiber length for the impact strength. As the GF content increased, the glass transition temperature slightly decreased. This result was interpreted as being a result of thermal degradation during the extrusion process to manufacture the GF/mPPO masterbatch. The results of the dynamic mechanical analyses, e.g., storage modulus and tan δ, show the good correlation with the increased flexural modulus, the decreased glass transition temperature, and the impact strength as the GF content increased.

참고문헌 (24)

10.1016/B978-0-08-102623-6.00001-9 Fu, S.-F., Lauke, B., and Mai, Y.-W. (2019). Science and Engineering of Short Fiber-Reinforced Polymer Composite, Woodhead Publishing. [2nd ed.].
Gopalraj A review on the recycling of waste carbon fibre/glass fibre-reinforced composites: Fibre recovery, properties and life-cycle analysis SN Appl. Sci. 2020 2 1
Tang Simultaneous toughening of PPO/HIPS/glass fiber reinforced composites with thermoplastic rubbers J. Appl. Polym. Sci. 2014 10.1002/app.40299 131 40299

상세보기
Hwang Thermal and physical properties of poly (phenylene oxide) blends with glass fiber reinforced syndiotactic polystyrene Polymer 1999 10.1016/S0032-3861(99)00115-9 40 5957

상세보기
Liu Tensile behavior and morphology studies of glass-fiber-reinforced polymeric in situ hybrid composites J. Appl. Polym. Sci. 2004 10.1002/app.20862 94 211

상세보기
Trachte Fracture properties of polyphenylene oxide composites Int. J. Polym. Mater. 1971 10.1080/00914037108071851 1 75

상세보기
Li Effect of PPO-g-MA on structures and properties of PPO/PA6/short glass fiber composites J. Polym. Sci. Part B Polym. Phys. 2009 10.1002/polb.21815 47 2188

상세보기
Ning A review of Long fibre thermoplastic (LFT) composites Int. Mater. Rev. 2020 10.1080/09506608.2019.1585004 65 164

상세보기
Yan Structure and interfacial shear strength of polypropylene-glass fiber/carbon fiber hybrid composites fabricated by direct fiber feeding injection molding Compos. Struct. 2018 10.1016/j.compstruct.2017.11.037 185 362

상세보기
Truckenmuller Direct processing of continuous fibers onto injection molding machines J. Reinf. Plasti. Compos. 1993 10.1177/073168449301200601 12 624

상세보기
Hadimani Thermal and mechanical properties of glass fibre reinforced polyphenylene ether/polystyrene/nylon-6 ternary blends Polym. Polym. Compos. 2021 29 1075
An Mechanical and thermal properties of long carbon fiber-reinforced polyamide 6 composites Fibers Polym. 2014 10.1007/s12221-014-2355-5 15 2355

상세보기
Vaxman Void formation in short-fiber thermoplastic composites Polym. Compos. 1989 10.1002/pc.750100609 10 449

상세보기
Vaxman Short fiber reinforced thermoplastics. II. Interrelation between fiber orientation and rheological properties of glass fiber-reinforced Noryl Polym. Compos. 1989 10.1002/pc.750100204 10 84

상세보기
10.1002/9781118097298.weoc070 Vaxman, A., Narkis, M., Siegmann, A., and Kenig, S. (2011). Short-Fiber Thermoplastics Composites: Fiber Fracture During Melt Processing, Wiley Encyclopedia of Composites.
Fu Effects of fiber length and orientation distributions on the mechanical properties of short-fiber-reinforced polymers a review J. Soc. Mater. Sci. 1999 10.2472/jsms.48.6Appendix_74 48 74

상세보기
Tseng Numerical prediction of fiber orientation and mechanical performance for short/long glass and carbon fiber-reinforced composites Compos. Sci. Technol. 2017 10.1016/j.compscitech.2017.02.020 144 51

상세보기
Fu Tensile properties of short-glass-fiber-and short-carbon-fiber-reinforced polypropylene composites Compos. Part A Appl. Sci. Manuf. 2000 10.1016/S1359-835X(00)00068-3 31 1117

상세보기
Bair Quantitative thermal analysis of polyblends Polym. Eng. Sci. 1970 10.1002/pen.760100411 10 247

상세보기
Whitfield Thermal properties of glass fiber reinforced polyamide 6 composites throughout the direct long-fiber reinforced thermoplastic process Polym. Eng. Sci. 2018 10.1002/pen.24529 58 46

상세보기
Ota Studies on the combined effect of injection temperature and fiber content on the properties of polypropylene-glass fiber composites Compos. Sci. Technol. 2005 10.1016/j.compscitech.2004.10.025 65 873

상세보기
Jachowicz Thermal degradation of the blend poly (2,6-dimethyl-1,4-phenylene oxide)-polystyrene Macromolecules 1984 10.1021/ma00137a004 17 1315

상세보기
10.3390/polym12040902 Sherif, G., Chukov, D.I., Tcherdyntsev, V.V., Torokhov, V.G., and Zherebtsov, D.D. (2020). Effect of Glass Fibers Thermal Treatment on the Mechanical and Thermal Behavior of Polysulfone Based Composites. Polymers, 12.

상세보기
10.3390/polym12010050 Chukov, D.I., Nematulloev, S.G., Tcherdyntsev, V.V., Torokhov, V.G., Stepashkin, A.A., Zadorozhnyy, M.Y., Zherebtsov, D.D., and Sherif, G. (2020). Structure and Properties of Polysulfone Filled with Modified Twill Weave Carbon Fabrics. Polymers, 12.

상세보기

LOADING...

원문 보기

AccessON 원문보기

원문 URL 링크

DOI : 10.3390/app112110266 [무료]
Molecular Diversity Preservation International : 저널
AccessON : 저널

*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.

오픈액세스(OA) 유형

GOLD

오픈액세스 학술지에 출판된 논문

이 논문과 함께 이용한 콘텐츠

저작권 관리 안내

내보내기 메뉴

내보내기 구분

파일저장
인쇄
메일전송

구성항목

기본정보
상세정보

관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관

저장형식

Text(ASCII format)
Excel format
RefWorks Direct Export
RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley

메일정보

받는사람 (필수): @
보내는사람 (선택): @
제목
내용: KISTI 검색결과 이메일 서비스

안내

총 건의 자료가 검색되었습니다.

다운받으실 자료의 인덱스를 입력하세요. (1-10,000)

검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다.

데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요)

다운로드 파일은 UTF-8 형태로 저장됩니다.
파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오.

Text(ASCII format)
Excel format

표제어: PCR

동의어: Packet Collision Rate

용어 설명 출처 목록 (6)

용어 설명: PCR은 세균 특이성이 있는 primer를 이용하여 적은 수의 세균이 있을지라도 쉽게 검출할 수 있는 유용한 방법이며, 이를 이용하여 구강 내 치면세균막이나 타액에서 직접 세균을 검출할 수 있게 되었다[8].

AI-Helper ※ AI-Helper는 을 사용합니다.

AI-Helper

안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

연합인증