최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기엘라스토머 = Elastomer, v.39 no.3, 2004년, pp.193 - 208
Morphology of injection molded polymer blend was investigated by experimental and theoretical approach. In experiments, the effects of injection speed and injection temperature on the morphology of injection molded MPPO/Nylon 6 blend were investigated. The morphology distribution across the part thi...
L. A. Utracki, 'Polymer Alloys and Blends', Hanser Publishers, Munich, 1989
S. Y. Kienzle, 'Polymer Blends and Alloy', Technomic Publishing Company, Inc., Lancaster, Pennsylvania, USA, 1988
A. N. Beris, 'Fluid Elements Deformation Behind an Advancing Flow Front', J. Rheol., 31, 121 (1987)
H. Mavridis, A. N. Hrymak and J. Vlachopoulos, 'Finite Elemen Simulation of Fountain Flow in Injection Molding', Poly. Eng. Sci., 26, 447 (1986)
H. Janeschits. Kriegel, 'Injection Molding of Plastics. II Analytical Solution of Heat Transfer Problem', Rheol. Acta, 18, 693 (1979)
L. A. Utracki and Z. H. Shi, 'Developement of Polymer Blend Morphology during Compounding in a Twin-Screw Extruder. Part I:Drop Dispersion and Coalescene-A Review', Poly. Eng. Sci., 32, 1824 (1992)
Z. H. Shi and L. A. Utracki, 'Developement of Polymer Blend Morphology during Compounding in a Twin-Serew Extruder. Part II: Theoretical Derivations', Poly. Eng. Sci., 32, 1834 (1992)
V. Bordereau, Z. H. Shi, L. A. Utracki, P. Sammut and M. Carrega, 'Developement of Polymer Blend Morphology during Compounding in a Twin-Screw Extruder. Part Ⅲ: Experimental Procedure and Preliminary Results', Poly. Eng. Sci., 32, 1846 (1992)
M. A. Huneault, Z. H. Shi and L. A. Utracki, 'Developement of Polymer Blending in a Twin-Screw Extruder. Part IV: A New Computational Model with Coalescence', Poly. Eng. Sci., 35, 115 (1995)
L. Delamare and B. Vergnes, 'Computation of the Morphological Changes of a Polymer Blend along a Twin-Screw Extruder', Poly. Eng. Sci., 36, 1685 (1996)
Peter Kennedy, 'Flow Ananlysis Reference Manual', Moldflow Pty. Ltd., (1993)
S. Bhattacharji and P. Savic, Pro. Heat tranfer Fluid Mech. Inst., 248 (1965)
C. Van der Reijden and A. Sara, 'A Study on Polymer Blending of Newtonian Microrheology Part 3: Deformation of Drops Suspended in Another Newtonian Fluid Flowing through a Convergmg Cone', Poly. Eng. Sci., 26, 1229 (1986)
C.D. Han and K. Funatsu, 'An Experimental Study of Droplet Deformation and Breakup in pressure-Driven Flows through Converging and Uniform Channels', J Rheol., 22, 113 (1978)
H. P. Grace, 'Dispersion Phenomena in High Viscosity Immiscible Fluid System and Application of Static Mixers as Dispersion Device in Such System', Chem. Eng. Commun., 14, 225 (1982)
G. J. Taylor, 'The Formation of Emulsions in Definable Fields of Flow', Proc. Roy. Soc., AI46, 501 (1934)
R G. Cox, 'The Deformation of a Drop in a General Time-Dependent Fluid Flow', J Fluid Mech., 37, 601 (1969)
D. Barthes-BiseI and A. Acrivos, 'Deformation and Burst of a Liquid Droplet FreeIy Suspended in a Linear Shear Field', J. Fluid Mech., 61, 1 (1973)
W. J. Philips, R W. Graves and R. W. Flumerfelt, 'Experimental Studies of Drop Dynamics in Shear Fields: Role of Dynamic Interfacial Effects', J. Coll. Inter. Sci., 76, 350 (1980)
B. J. Bentley and L. G. Leal, 'An Experimental lnvestigation of Drop Deformation and Breakup in Steady, Two-Dimensional Linear Flow', J. Fluid Mech., 167, 241 (1986)
S. J. Choi and W. R. Schowalter, 'Rheological Propeties of Nondilute Suspensions of Deformable Particles', The Physics of Fluid, 18, 420 (1975)
D. Barthes-BiseI and A. Acrivos, 'Deformation and Burst of a Liquid Droplet Freely Suspended in a Linear Shear Field', J. Fluid Mech., 61, 1 (1973)
M. A. Huneault, M. F. Champagne and A. Luciani, 'Polymer Blend Mixing and Dispersion in the Kneading Section of a Twin-Screw Extruder', Poly. Eng. Sci., 36, 1694 (1996)
P. H. M. Elemens, 'Modelling of the Processing of Incompatible Polymer Blends' , Ph. D. Thesis, Univ. Eindhoven, Eindhoven, Netherlands, Munich, (1964)
B. Kalb, R. G. Cox and S. J. Manley, 'Hydrodynamically Induced Formation of Cellulose Fibers', J. Call. Inter. Sci., 82, 286 (1981)
R. A. Brujin, 'Modelling of the Processing of Incompatible Polymer Blends', Ph. D. Thesis, Eindhoven Univ. Tech., Eindhoven, Netherlands, Munich, (1989)
H. A. Stone, B. J. Bendy and L. G. Leal, 'An Experimental Study of Transient Effects in the Breakup of Viscous Drops', J. Fluid Mech., 173, 131 (1986)
S. Tomotica, 'On the Stability of a Cylindrical Thread of a Viscous Liquid Surounded by Another Viscous Fluid', Proc. Soc., 150, 332 (1935)
J. J. Elmendorf, 'A Study on Polymer Blending Microrheology', Poly. Eng. Sci., 26, 418 (1086)
A. Luciani, M. F. Champagne. and 1. A. Utracki, 'Interfacial Tension Coefficient from the Retraction of Ellipsoidal Drops', J. Poly. Sci. B: Poly. Phy.,35, 1393 (1997)
J. M. Rallison, 'The Deformation of Small Viscous Drops and Bubble in Shear Flow', Ann. Rev. Fluid Mech., 16, 45 (1984)
T. R. Fuller and A. J. Fricke, 'Thermal Conductivity of Polymer Melts', J. Appl. Poly. Sci., 15, 1729 (1971)
Y. Agari, M. Shimada and A. Ueda 'Thermal diffusivity and Conductivity of PS/PPO Blends', Polymer, 38, 2649 (1997)
H. J. Van Oene, 'Modes of Dispersion of Viscoelastic Fluid in Flow', J. Colloid Interface Sci., 40, 448 (1972)
S. Wu, 'Formation of Dispersed Phase in Incompatible Polymer Blends: Interfacial and Rheological Effects', Poly. Eng. Sci., 27, 335 (1987)
※ AI-Helper는 부적절한 답변을 할 수 있습니다.