[논문]Heat transfer enhancement in cross-flow heat exchangers using oval tubes and multiple delta winglets

doi:10.1016/S0017-9310(03)00047-4

Heat transfer enhancement in cross-flow heat exchangers using oval tubes and multiple delta winglets

International journal of heat and mass transfer, v.46 no.15, 2003년, pp.2841 - 2856

Tiwari, S. (Department of Mechanical Engineering, Indian Institute of Technology, Kanpur 208016, India) , Maurya, D. (Department of Mechanical Engineering, Indian Institute of Technology, Kanpur 208016, India) , Biswas, G. (Corresponding author. Tel.: +91-512-597616) , Eswaran, V. (fax: +91-512-597408)

Abstract ▼ AI-Helper

AbstractA three-dimensional study of laminar flow and heat transfer in a channel with built-in oval tube and delta winglets is carried out through the solution of the complete Navier–Stokes and energy equations using a body-fitted grid and a finite-volume method. The geometrical configuration represents an element of a gas–liquid fin–tube cross-flow heat exchanger. The size of such heat exchangers can be reduced through enhancement of transport coefficients on the air (gas) side, which are usually small compared to the liquid side. In a suggested strategy, oval tubes are used in place of circular tubes, and delta-winglet type vortex generators in various configurations are mounted on the fin-surface. An evaluation of the strategy is attempted in this investigation. The investigation is carried out for different angles of attack of the winglets to the incoming flow for the case of two winglet pairs. The variation of axial location of the winglets is also considered for one pair of winglets mounted in common-flow-down configuration. The structures of the velocity field and the heat transfer characteristics have been presented. The results indicate that vortex generators in conjunction with the oval tube show definite promise for the improvement of fin–tube heat exchangers.

참고문헌 (11)

Int. J. Heat Mass Transfer Biswas 37 283 1994 10.1016/0017-9310(94)90099-X Heat transfer enhancement in fin-tube heat exchangers by winglet-type vortex generators

상세보기
J. Heat Transfer (ASME) Valencia 118 209 1996 10.1115/1.2824039 Heat transfer enhancement by longitudinal vortices in fin-tube heat exchanger element with flat tubes

상세보기
10.1115/IMECE2000-1288 J.E. O’Brien, M.S. Sohal, Local heat transfer for finned-tube heat exchangers using oval tubes, Proceedings of NHTC’00, 34th National Heat Transfer Conference Pittsburgh, Pennsylvania, USA, 2000
AIAA J. Pauley 26 816 1988 10.2514/3.9974 Experimental study of the development of longitudinal vortex pairs embedded in a turbulent boundary layer

상세보기
Kakac 1981 Low Reynolds number flow heat exchangers
J. Comput. Phys. Orlanski 21 251 1976 10.1016/0021-9991(76)90023-1 A simple boundary condition for unbounded flows

상세보기
V. Eswaran, S. Prakash, A finite volume method for Navier-Stokes equations, Proceedings of the third Asian CFD Conference, Bangalore, vol. 1, 1998, pp. 251-269
Numer. Heat Transfer Part A Prabhakar 41 307 2002 10.1080/10407780252780180 Numerical prediction of heat transfer in a channel with a built-in oval tube and two different shaped vortex generators

상세보기
Int. J. Heat Mass Transfer Biswas 39 16 3441 1996 10.1016/0017-9310(95)00398-3 Numerical and experimental determination of flow structure and heat transfer effects of longitudinal vortices in a channel flow

상세보기
10.1615/IHTC11.1930 G. Biswas, N.K. Mitra, Longitudinal vortex generators for enhancement of heat transfer in heat exchanger applications, Proceedings of 11th IHTC, Kyongju, Korea, vol. 5, 1998, pp. 339-344
M. Hagedorn, Untersuchung des Wärmerberganges und des Strömungsverlustes an lamellen Rohr Wärmerbertragermodulen unter Berücksichtigung der Wärmeleitung in den Lamellen, Diplomerbeit Nr. 95-07, Institut Für Thermo-und Fluiddynamik, Ruhr-Universität Bochum, Germany, 1995

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

Heat transfer enhancement in cross-flow heat exchangers using oval tubes and multiple delta winglets

Abstract ▼ AI-Helper

참고문헌 (11)

이 논문을 인용한 문헌

관련 콘텐츠

원문 URL 링크

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트