참고문헌 (23)

1. Int. J. of Enhanced Heat Transfer Fiebig 2 43 1995 10.1615/JEnhHeatTransf.v2.i1-2.60 Vortex generators for compact heat exchangers 

   상세보기

2. Int. J. of Heat and Fluid Flow Fiebig 16 376 1995 10.1016/0142-727X(95)00043-P Embedded vortices in internal flow: heat transfer and pressure loss enhancement 

   상세보기

3. Z. angew. Math. Mech. Fiebig 77 3 1997 10.1002/zamm.19970770103 Vortices and heat transfer 

   상세보기

4. Trans. IChemE. Fiebig 76 Part A 108 1998 10.1205/026387698524686 Vortices, generators and heat transfer 

   상세보기

5. Numerical Heat Transfer, Part A Chen 33 371 1998 10.1080/10407789808913944 Conjugate heat transfer of a finned oval tube, part A: flow patterns 

   상세보기

6. Numerical Heat Transfer, Part A Chen 33 387 1998 10.1080/10407789808913945 Conjugate heat transfer of a finned oval tube, part B: heat transfer behavior 

   상세보기

7. Numerical Heat Transfer, Part A Fiebig 28 133 1995 10.1080/10407789508913737 Conjugate heat transfer of a finned tube, part A: heat transfer behavior and occurrence of heat transfer reversal 

   상세보기

8. Numerical Heat Transfer, Part A Fiebig 28 147 1995 10.1080/10407789508913738 Conjugate heat transfer of a finned tube, part B: heat transfer augmentation and avoidance of heat transfer reversal by LVG 

   상세보기

9. Y. Dong, Experimentelle Untersuchung der Wechselwirkung von Langswirbelerzeugern und Kreiszylindern in Kanalstromungen in Bezug auf Warmeubergang und Stromungsverlust, Dissertation, Institut of Thermo- und Fluiddynamik, Ruhr-Universitat Bochum, 1988 

10. M. Sanchez, Numerische Simulation von einreihigen Lamellen-Rohr-Warmeubertragern mit Langswirbelerzeugern, Dissertation, Institut fur Thermo- und Fluiddynamik, Ruhr-Universitat Bochum, 1991 

11. A. Bastani, Numerische Untersuchung von Warmeubergang und Stromungsverlust in Lamellen-Rohr-Warmeubertragern mit Langswirbelerzeugern, Dissertation, Institut fur Thermo- und Fluiddynamik, Ruhr-Universitat Bochum, 1992 

12. Int. J. Heat Mass Transfer Biswas 37 283 1994 10.1016/0017-9310(94)90099-X Heat transfer enhancement in a fin-tube heat exchangers by winglet type vortex generators 

    상세보기

13. A. Valencia, Warmeubergang und Druckverlust in Lamellen-Rohr-Warmeubertragern mit Langswirbelerzeugern, Dissertation, Institut fur Thermo- und Fluiddynamik, Ruhr-Universitat Bochum, 1993 

14. 10.1016/S0017-9310(98)00076-3 Y. Chen, M. Fiebig, N.K. Mitra, Conjugate heat transfer of a finned oval tube with a punched longitudinal vortex generator in form of a delta winglet-parametric investigations of the winglet, Int. J. Heat Mass Transfer 41 (1998) 3961-3978 

    상세보기

15. 10.1016/S0017-9310(98)00130-6 Y. Chen, M. Fiebig, N.K. Mitra, Heat transfer enhancement of a finned oval tube with punched longitudinal vortex generator in-line, Int. J. Heat Mass Transfer 41 (1998) 4151-4166 

    상세보기

16. S. Tiggelbeck, Experimentelle Untersuchungen an Kanalstromungen mit Einzel- und Doppelwirbelerzeuger-Reihen fur den Einsatz in kompakten Warmetauschern, Dissertation, Institut fur Thermo- und Fluiddynamik, Ruhr-Universitat Bochum, 1990 

17. Kays 1984 Compact Heat Exchangers 

18. Chen 1997 Proceedings of Eurotherm Seminar No 55, ‘Heat Transfer in Single Phase Flows 5’, Santorini, 18-19 September Influence of the angle of attach of a wing-type VG on the heat transfer and flow loss of a finned oval tube 

19. Chen 761 1997 Proceedings of the 15th IMACS World Congress, Wissenschaft und Technik Verlag, Berlin Numerical investigation of fin efficiencies in a finned oval tube 

20. Chen 735 1997 Proceedings of the Third ISHMT-ASME Heat and Mass Transfer Conference, Narosa Publishing House, New Delhi, London Numerical investigation of flow and heat transfer in a finned oval tube 

21. Shah 1987 Handbook of Single-Phase Convective Heat Transfer Laminar convective heat transfer 

22. AIAA Journal Pauley 26 816 1988 10.2514/3.9974 Experimental study of the development of longitudinal vortex pairs embedded in a turbulent boundary layer 

    상세보기

23. 10.1615/IHTC8.1460 M. Fiebig, P. Kalweit, N.K. Mitra Wing type vortex generators for heat transfer enhancement. In: Proceedings of the Eighth IHTC, 1986, vol. 6, pp. 2909-2913