최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Wear: An international journal on the science and technology of friction, lubrication and wear, v.256 no.5, 2004년, pp.545 - 556
Wood, R.J.K (Corresponding author. Tel.: +44-2380-594881) , Speyer, A.J (fax: +44-2380-593230.)
AbstractThis paper describes gravimetric results of HVOF sprayed commercially pure Al and Al/12% Si eutectic alloy coatings obtained under erosion–corrosion conditions. The performance of these coatings are compared to a hot-dipped zinc coating. These coatings have been applied to AISI 1020 c...
P. McIntyre, Proceedings of the Marine Corrosion Club Meeting, Aberdeen, April 1999.
Mater. Des. Wood 20 179 1999 10.1016/S0261-3069(99)00024-2 The sand erosion performance of coatings
R.J. Percy, The operational performance of BP choke valves, BP Engineering, Risers and Subsea Equipment Group, BPE.90.ER152, 1990, Unpublished.
10.1016/0261-3069(92)90241-9 I.M. Hutchings, Tribology: Friction and Wear of Engineering Materials, Arnold, Paris, 1992.
Wear Meng 181-183 443 1995 10.1016/0043-1648(95)90158-2 Wear models and predictive equations: their form and content
R.R. Faddick, Wear in pipes, in: Short Course on Slurry Pipelining Technology, Camborne School of Mines, 1982, pp. 1-15.
Wear Haugen 186-187 179 1995 10.1016/0043-1648(95)07158-X Sand erosion of wear-resistant materials: erosion in choke valves
S.P. Turchaninov, The Life of Hydrotransport Pipelines, Nedra Press, Moscow, Russia, 1973.
A.J. Speyer, R.J.K. Wood, K.R. Stokes, A.J. Sturgeon, Corrosion of aluminium based coatings for use in marine pipework, in: Proceedings of the EuroCorr 2000, Queen Mary and Westfield College, London, September 10-14, 2000.
A.J. van Riemsdijk, J.G.A. Bitter, Erosion in gas-solid systems, in: Proceedings of the Fifth World Petroleum Congress, Section VII, New York, 1959, pp. 43-57.
Wear Laitone 56 239 1979 10.1016/0043-1648(79)90022-X Aerodynamic effects in the erosion process
J. Eng. Ind. Benchaita 105 215 1983 10.1115/1.3185891 Erosion of a metallic plate by solid particles entrained in a liquid jet
Wear Finnie 48 181 1978 10.1016/0043-1648(78)90147-3 On the velocity dependence of the erosion of ductile metals by solid particles at low angles of incidence
M. Hashish, An improved model of erosion by solid particle impact, in: Proceedings of the Seventh International Conference on Erosion by Liquid and Solid Impact, Paper No. 66.
Wear Sundararajan 149 111 1991 10.1016/0043-1648(91)90368-5 A comprehensive model for the solid particle erosion of ductile materials
Kagaku Kogaku Ronbunshu Hojo 14 161 1988 10.1252/kakoronbunshu.14.161 Erosion behaviour of plastics by slurry jet method
Wear Meyer-Rodenbeck 154 305 1992 10.1016/0043-1648(92)90161-Z On the abrasive-corrosive wear of aluminium alloys
10.5006/1.3293564 A.V. Levy, Solid Particle Erosion and Erosion-Corrosion of Materials, ASM International, 1995.
Tribol. Int. Clark 35 10 2002 10.1016/S0301-679X(02)00052-X Particle velocity and size effects in laboratory slurry erosion measurements, OR do you know what your particles are doing?
Wear Lin 141 279 1991 10.1016/0043-1648(91)90274-X The effect of impingement angle on slurry erosion
Wear Li 186-187 515 1995 10.1016/0043-1648(95)07181-4 The influence of corrosion on the erosion of aluminium by aqueous silica slurries
Wear Hearley 233-235 328 1999 10.1016/S0043-1648(99)00240-9 The erosion behaviour of NiAl intermetallic coatings produced by high velocity oxy-fuel thermal spraying
Wear Wood 211 70 1997 10.1016/S0043-1648(97)00071-9 Sand erosion performance of denotation gun applied tungsten carbide/cobalt-chromium coatings
Wear Oka 250 736 2001 10.1016/S0043-1648(01)00710-4 Control and evaluation of particle impact conditions in a sand erosion test facility
J. Inst. Met. Bengough 32 143 1924 Seventh report to the research committee of the institute of metals. Part II. The corrosion of zinc
J. Electrochem. Soc. Gilbert 101 9 448 1954 10.1149/1.2781298 Jet impingement tests
F.L. LaQue, Marine Corrosion: Causes and Prevention, Wiley, New York, 1975.
Wear Wood 140 387 1990 10.1016/0043-1648(90)90098-U The synergistic effect of erosion and corrosion: trends in published results
Wear Stack 186-187 523 1995 10.1016/0043-1648(95)07175-X Identification of transitions in erosion-corrosion regimes in aqueous environments
ASTM Standard G 119-93, Standard Guide for Determining Synergism Between Wear and Corrosion, 1993.
Wear Naerheim 104 139 1985 10.1016/0043-1648(85)90058-4 The influence of electrochemical potential on wear
A.J. Speyer, Wear-corrosion sensing in flowing seawater, Ph.D. Thesis, School of Engineering Sciences, University of Southampton, November 2002.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.