최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of composite materials, v.39 no.14, 2005년, pp.1295 - 1306
Ng, Yeow-Cheong (National Centre for Advanced Materials Performance (NCAMP), Wichita State University, 1845 Fairmount Avenue, Wichita, KS 67260-0093, USA, National Institute for Aviation Research (NAIR), Wichita State University, 1845 Fairmount Avenue, Wichita, KS 67260-0093, USA)
This paper proposes a method of deriving the engineering and strength properties of unidirectional lamina from laminate properties. Simple straight-sided untabbed tension and compression specimens are used to obtain the laminate properties. The derivation approach is an extension of existing methods...
Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a 45 Laminate 2001
Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
Standard Test Method for Determining the Compressive Properties of Polymer Matrix Composite Laminates Using a Combined Loading Compression (CLC) Test Fixture
SACMA SRM 1R-94, SACMA Recommended Test Method for Compressive Properties of Oriented Fiber-Resin Composites, Suppliers of Advanced Composite Materials Association
Johnson, WS, Masters, JE, Wilson, DW, Adams, DF, Welsh, JS. The Wyoming Combined Loading Compression (CLC) Test Method. Journal of composites technology & research, vol.19, no.3, 123-.
37th International SAMPE Symposium Hart-Smith, L.J. 977
Mechanics of Composite Materials Jones, R.M. 1998 2
Kam, T.Y., Lai, F.M.. Experimental and theoretical predictions of first-ply failure strength of laminated composite plates. International journal of solids and structures, vol.36, no.16, 2379-2395.
36th International SAMPE Symposium Rawlinson, R.A. 1058
Tsai, Stephen W., Wu, Edward M.. A General Theory of Strength for Anisotropic Materials. Journal of composite materials, vol.5, no.1, 58-80.
MIL-HDBK-17-1F Polymer Matrix Composites, Volume 1: Guidelines for Characterization of Structural Materials U.S. Department of Defense 2002
Material Qualification and Equivalency for Polymer Matrix Composite Material Systems: Update Procedure, DOT/FAA/AR-03/19 U.S. Department of Transportation 2003
Johnson, WS, Masters, JE, Wilson, DW, Welsh, JS, Adams, DF. Unidirectional Composite Compression Strengths Obtained by Testing Cross-Ply Laminates. Journal of composites technology & research, vol.18, no.4, 241-.
Welsh, Jeffry S., Adams, Donald F.. Testing of angle-ply laminates to obtain unidirectional composite compression strengths. Composites. Part A, Applied science and manufacturing, vol.28, no.4, 387-396.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.