최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Nuclear engineering and design : an international journal devoted to the thermal, mechanical and structural problems of nuclear energy, v.235 no.22, 2005년, pp.2337 - 2348
Choi, Woo-Seok (Mechanical Engineering Division, Korea Atomic Energy Research Institute (KAERI), P.O. Box 105, Yuseong, Daejeon 305-6000, South Korea) , Park, K.B. (Mechanical Engineering Division, Korea Atomic Energy Research Institute (KAERI), P.O. Box 105, Yuseong, Daejeon 305-6000, South Korea) , Park, G.J. (Hanyang University, Korea)
AbstractAll the forces in the real world act dynamically on structures. Since dynamic loads are extremely difficult to handle in analysis and design, static loads are usually utilized with dynamic factors. Generally, the dynamic factors are determined from design codes or experience. Therefore, stat...
ANSYS 1999. User's Manual, Revision 5.3, Swanson Analysis Systems Inc.
Arora 1987 User's Manual for IDESIGN: Version 3. 5
ASCE J. Struct. Eng. Austin 118 1660 1987 10.1061/(ASCE)0733-9445(1987)113:8(1660) Probabilistic design of moment-resistant frame under seismic loading
Bathe 1982 Finite Element Procedures in Engineering Analysis
Bui 1994 Inverse Problems in the Mechanics of Materials: An Introduction
Cheng, F.Y., Chang, C.C., 1988. Safety-Based Optimum Design of Nondeterministic Structures Subject to Various Types of Seismic Loads, NSF Report, U.S. Department of Commerce, VA, NTIS No. PB90-133489/AS, pp. 326.
J. Earthquake Eng. Struct. Dyn. Cheng 16 46 1988 10.1002/eqe.4290160105 Assessment of various code provisions based on optimum design of steer structures
Cheng vol. III 1983
KSME (A) Choi 20 12 3767 1996 Transformation of a dynamic load into an equivalent static load and shape optimization of the road arm in self-propelled howitzer
KSME (A) Choi 23 2 264 1999 Transformation of dynamic loads into equivalent static loads based on stress approach
Int. J. Numer. Methods Eng. Choi 46 29 1999 10.1002/(SICI)1097-0207(19990910)46:1<29::AID-NME661>3.0.CO;2-D Transformation of dynamic loads into equivalent static loads based on modal analysis
Int. J. Num. Mech. Eng. Feng 11 39 1977 10.1002/nme.1620110106 Optimal structural design under dynamic loads
Friswell 1995 Finite Element Model Updating in Structural Dynamics
AIAA J. Grandhi 24 4 649 1986 10.2514/3.9321 Design-oriented identification of critical times in transient response
Struct. Optimization Greene 3 176 1991 10.1007/BF01743074 Computational aspects of sensitivity calculations in linear transient structural analysis
Haftka 1991 Elements of Structural Optimization
Haug 1979 Applied Optimal Design
Menke 1989 Geophysical Data Analysis: Discrete Inverse Theory
AIAA J. Mills-Curran 23 1 132 1985 10.2514/3.8881 Structural optimization with dynamic behavior constraints
ASME J. Appl. Mech. Moller 66 236 1999 10.1115/1.2789152 Load identification through structural modification
Tarantora 1987 Inverse Problem Theory: Methods for Data Fitting and Model Parameter Estimation
ASCE J. Struct. Engi. Truman 116 3324 1990 10.1061/(ASCE)0733-9445(1990)116:12(3324) Optimum assessment of irregular 3-D buildings
Truman, K.Z., Petruska, D.J., 1991. Optimum design of dynamically excited structural systems using time history analysis, OPTI91-International Conference for Computer Aided Optimum Design of Structures, Boston, MA, June 25-27, 1991; Optimization of structural systems and industrial applications. In: Hernandez, S., Brebbia, C.A. (Eds.), Elsevier Applied Science, London, pp. 197-207.
SMiRT-15 Zhao 9 145 1999 A new equivalent static method for seismic calculation of piping systems
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 공개 리포지터리에 출판본, post-print, 또는 pre-print를 셀프 아카이빙 하여 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.