최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기International journal of heat and mass transfer, v.49 no.3/4, 2006년, pp.682 - 694
Sung, Myung Ki (Boiling and Two-Phase Flow Laboratory, School of Mechanical Engineering, Purdue University, 585 Purdue Mall, West Lafayette, IN 47907, USA) , Mudawar, Issam (Corresponding author. Tel.: +1 765 494 5705)
AbstractExperimental and numerical methods were used to explore the cooling performance of a new hybrid device consisting of a slot jet impinging into a micro-channel, thus capitalizing upon the merits of both cooling configurations. The three-dimensional heat transfer characteristics of this device...
IEEE Trans. Compon. Pack. Technol. Mudawar 24 122 2001 10.1109/6144.926375 Assessment of high-heat-flux thermal management schemes
ASME J. Heat Transfer Wadsworth 112 891 1990 10.1115/1.2910496 Cooling of a multichip electronic module by means of confined two-dimensional jets of dielectric liquid
ASME J. Electron. Pack. Estes 117 323 1995 10.1115/1.2792112 Comparison of two-phase electronic cooling using free jets and sprays
L.M. Jiji, Z. Dagan, Experimental investigation of single phase multi-jet impingement cooling of array of microelectronic heat sources, in: Proc. Int. Symp. on Cooling Technology for Electronic Equipment, Honolulu, HI, 1987, pp. 265-283.
S.J. Downs, E.H. James, Jet impingement heat transfer-a literature survey, ASME paper No. 87-Ht-35, 1987, ASME, New York, NY.
Int. J. Heat Mass Transfer Goldstein 25 1857 1982 10.1016/0017-9310(82)90108-9 Visualization of heat transfer from arrays of impinging jets
Int. J. Heat Mass Transfer Craft 36 2685 1993 10.1016/S0017-9310(05)80205-4 Impinging jet studies for turbulence model assessment-II. An examination of the performance of four turbulence models
Int. J. Heat Mass Transfer Park 46 251 2003 10.1016/S0017-9310(02)00270-3 Streamline upwind numerical simulation of two-dimensional confined impinging slot jets
Appl. Therm. Eng. Baydar 25 409 2005 10.1016/j.applthermaleng.2004.05.016 An experimental and numerical investigation on a confined impinging air jet at high Reynolds numbers
IEEE Electron. Dev. Lett. Tuckerman EDL-2 126 1981 10.1109/EDL.1981.25367 High-performance heat sinking for VLSI
Int. J. Heat Mass Transfer Weisberg 35 2465 1992 10.1016/0017-9310(92)90089-B Analysis of microchannels for integrated cooling
Int. J. Heat Mass Transfer Fedorov 43 399 2000 10.1016/S0017-9310(99)00151-9 Three-dimensional conjugate heat transfer in the microchannel heat sink for electronic packaging
Int. J. Heat Mass Transfer Qu 45 2549 2002 10.1016/S0017-9310(01)00337-4 Experimental and numerical study of pressure drop and heat transfer in a single-phase micro-channel heat sink
ASME J. Heat Transfer Kim 121 639 1999 10.1115/1.2826027 Forced convection in microstructures for electronic equipment cooling
Numer. Heat Transfer A Ng 45 1013 2004 10.1080/10407780490454368 Computation of three-dimensional developing pressure-driven liquid flow in a microchannel with EDL effect
Numer. Heat Transfer A Ambatipudi 37 711 2000 10.1080/104077800274046 Analysis of conjugate heat transfer in microchannel heat sinks
Comput. Methods Appl. Mech. Eng. Lauder 3 269 1974 10.1016/0045-7825(74)90029-2 The numerical computation of turbulent flows
Phys. Fluids Harlow 8 2182 1965 10.1063/1.1761178 Numerical calculation of time-dependent viscous incompressible flow of fluid with free surface
ASME J. Heat Transfer Kays 116 284 1994 10.1115/1.2911398 Turbulent Prandtl number-Where are we?
Versteeg 1995 An Introduction to Computational Fluid Dynamics, The Finite Volume Method
Patankar 1980 Numerical Heat Transfer and Fluid Flow
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.