다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
International journal of machine tools & manufacture, v.46 no.10, 2006년, pp.1097 - 1106
Dassanayake, K.M. Muditha (Postgraduate, Tokyo University of Agriculture and Technology, 2-24-16 Nakacho, Koganei, Tokyo 184-8588, Japan) , Tsutsumi, Masaomi (Tokyo University of Agriculture and Technology, 2-24-16 Nakacho, Koganei, Tokyo 184-8588, Japan) , Saito, Akinori (Nippon University, Koriyama, Fukushima, Japan)
AI-Helper
AbstractThis research was conducted in order to investigate the effectiveness of the checking method specified in ISO 10791-6 and to propose an additional method for identifying the geometric deviations inherent to five-axis machining centers with a universal spindle head. The specified method is no...
Baughman 271 1970 Numerical Control User's Handbook Multi-axis machining with APT
Reshetov 1988 Accuracy of Machine Tools
Int J Machine Tools Manuf Tsutsumi 43 771 2003 10.1016/S0890-6955(03)00053-1 Identification and compensation of systematic deviations particular to 5-axis machining centers
Int J Machine Tools Manuf Tsutsumi 44 1333 2004 10.1016/j.ijmachtools.2004.04.013 Identification of angular and positional deviations inherent to 5-axis machining centers with a tilting-rotary table by simultaneous four-axis control movements
ISO 230-1: Test Code for Machine Tools-Part 1: Geometric Accuracy of Machines Operating Under No-Load or Finishing Conditions, second ed., 1996.
Int J Prod Res Abbaszadeh-Mir 40 18 4781 2002 10.1080/00207540210164459 Theory and simulation for the identification of the link geometric errors for five-axis machine tool using telescoping magnetic ball-bar
10.1007/978-1-4471-0777-4_43 J.R.R. Mayer, Y.A. Mir, C.Fortin, Calibration of a five-axis machine tool for position independent geometric error parameters using a telescoping magnetic ball bar, in: Proceedings of the 33rd International MATADOR Conference, 1999, pp. 275-280.
Int J Adv Manuf Technol Suh 14 656 1998 10.1007/BF01192286 Error modeling and measurement for the rotary table of five-axis machine tools
Trans Jap Soc Mech Eng Ser C Sakamoto 63 605 262 1997 10.1299/kikaic.63.262 Identification of alignment errors in five axis machining centers using telescoping ball bar
Trans Jap Soc Mech Eng, Ser C Sakamoto 60 575 2475 1994 10.1299/kikaic.60.2475 Identification of alignment errors in five-axis machining centers
Trans Jap Soc Mech Eng Ser C Sakamoto 63 605 268 1997 10.1299/kikaic.63.268 Evaluation of alignment accuracy for five-axis machining centers errors using telescoping ball bar
ISO 10791-1: Test Conditions for Machining Centers-Part 1: Geometric Test for Machines with Horizontal Spindle and with Accessory Head (Horizontal Z-Axis), 1998.
ISO 10791-6: Test Conditions for Machining Centers-Part 6: Accuracy of Feeds, Speeds and Interpolations, 1998.
Inasaki 1997 Shape Generation Theory of Machine Tools-Its Basics and Applications, Yokendo, Tokyo
ISO 10791-8: Test Conditions for Machining Centers-Part 8: Evaluation of the Contouring Performance in the Three Coordinate Planes, 2001.
해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.