최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Tribology international, v.40 no.3, 2007년, pp.512 - 521
Belforte, G. (Department of Mechanics, Politecnico di Torino10129, Torino, Italy) , Raparelli, T. , Viktorov, V. , Trivella, A.
The paper describes an experimental study conducted in order to determine the supply hole discharge coefficients of externally pressurized gas bearings. Tests were carried out on annular orifices and simple orifices with feed pocket. Air consumption and pressure distributions were measured as a func...
Wear Majumdar 62 299 1980 10.1016/0043-1648(80)90175-1 Externally pressurized gas bearings: a review
J Tribol Belforte 125 10 836 1999 10.1115/1.2834143 Theoretical Investigation of fluid inertia effects and stability of self-acting gas journal bearings
J Tribol Al-Bauder 114 7 630 1992 10.1115/1.2920928 Symmetric radial laminar channel flow with particular reference to aerostatic bearings
J Basic Eng Lund 86 6 328 1964 10.1115/1.3653073 The hydrostatic gas journal bearing with journal rotation and vibration
J Mech Trans Automat Des Bryant 108 12 448 1986 10.1115/1.3258753 A design methodology for obtaining infinite stiffness in an aerostatic thrust bearing
Goodwin 1989 Dynamics of Rotor-Bearing Systems
Tribol Int Renn 37 4 309 2004 10.1016/j.triboint.2003.10.003 Experimental and CFD study on the mass flow-rate characteristic of gas through orifice-type restrictor in aerostatic bearings
Elrod HG, Glanfield GH. Computer procedures for the design of flexibly mounted, externally pressurized, gas lubricated journal bearing. In: Proceedings of the gas bearing symposium, vol. 22. University of Southampton, 1971. p. 1-37.
J Lubr Technol Kazimierski 102 1 59 1980 10.1115/1.3251439 Investigations of externally pressurized gas bearing with different feeding systems
J Lubric Technol Mori 91 1 181 1969 10.1115/1.3554854 Theoretical flow-models for externally pressurized gas bearings
Belforte G, Raparelli T, Viktorov V, Trivella A. Effects of supply hole dimensions and operating conditions on the hole discharge coefficient of an aerostatic bearing. In: Proceedings of the third AIMETA international tribology conference, 18-20 September 2002, Vietri sul Mare, Salerno, Italy. Aracne Editor. Cd rom ISBN 88-900908-0-4.
Belforte G, Raparelli T, Viktorov V, Trivella A. Discharge coefficients of simple orifices with feed pocket for aerostatic bearings. In: Proceedings of the fourth AIMETA international tribology conference, 14-17 September 2004, Rome, Italy. Aracne Editor. p. 467-74.
Tribol Int Kassab 30 7 533 1997 10.1016/S0301-679X(97)00001-7 Effects of operating conditions and supply hole diameter on the performance of a rectangular aerostatic bearing
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.