최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기International journal of machine tools & manufacture, v.47 no.7/8, 2007년, pp.1214 - 1228
Mohd Abbas, Norliana (Corresponding author. Tel.: +60162186521) , Solomon, Darius G. (fax: +60355435160.) , Fuad Bahari, Md. (Faculty of Mechanical Engineering, Universiti Teknologi MARA, 40450 Shah Alam, Selangor Darul Ehsan, Malaysia)
AbstractElectrical discharge machining (EDM) is one of the earliest non-traditional machining processes. EDM process is based on thermoelectric energy between the work piece and an electrode. A pulse discharge occurs in a small gap between the work piece and the electrode and removes the unwanted ma...
International Journal of Machine Tools & Manufacture Ho 43 1287 2003 10.1016/S0890-6955(03)00162-7 State of the art electrical discharge machining (EDM)
Journal of Materials Processing Technology Singh 149 272 2004 10.1016/j.jmatprotec.2003.11.046 Some investigations into the electric discharge machining of hardened tool steel using different electrode materials
Journal of Materials Processing Technology Luis 164-165 889 2005 10.1016/j.jmatprotec.2005.02.045 Material removal rate and electrode wear study on the EDM of silicon carbide
Engineering Failure Analysis Bojorquez 9 93 2002 10.1016/S1350-6307(00)00028-5 Formation of a crater in the workpiece on an electrical discharge machine
International Journal of Machine Tools & Manufacture Marafona 46 1 2005 A finite element model of EDM based on the Joule effect
Journal of Materials Processing Technology Ramasawmy 148 155 2004 10.1016/S0924-0136(03)00652-6 Effect of EDM process parameters on 3D surface topography
Rajurkar 1994 Handbook of Design, Manufacturing and Automation, Chapter 13: Nontraditional Manufacturing Processes
Journal of Materials Processing Technology Guo 63 823 1997 10.1016/S0924-0136(96)02732-X A study of ultrasonic-aided wire electrical discharge machining
Journal of Materials Processing Technology Zhang 68 83 1997 10.1016/S0924-0136(96)02545-9 Spark erosion with ultrasonic frequency
Journal of Materials Processing Technology Zhixin 53 811 1995 10.1016/0924-0136(94)01749-Q Ultrasonic vibration pulse electro-discharge machining of holes in engineering ceramics
Ogawa Hitoshi, Nogami Teruo, Marimoto Iwao, Study of Micro Machining of Metals by EDM with High Frequency Vibration, Takushima Prefectual Industrial Technology Center, 1999-2001.
Journal of Materials Processing Technology Thoe 92-93 323 1999 10.1016/S0924-0136(99)00117-X Combined ultrasonic and electrical discharge machining of ceramic coated nickel alloy
Journal of Materials Processing Technology Wansheng 120 101 2002 10.1016/S0924-0136(01)01149-9 Ultrasonic and electric discharge machining to deep and small hole on titanium alloy
International Journal of Machine Tools & Manufacture Yan 42 1105 2002 10.1016/S0890-6955(02)00061-5 Study of precision micro-holes in borosilicate glass using micro EDM combined with micro ultrasonic vibration machining
Journal of Micromechanics and Microengineering Huang 13 693 2003 10.1088/0960-1317/13/5/322 Ultrasonic vibration assisted electro-discharge machining of microholes in Nitinol
Journal of Micromechanics and Microengineering Yeo 9 345 1999 10.1088/0960-1317/9/4/310 Effects of ultrasonic vibrations in micro electro-discharge machining
Journal of Materials Processing Technology Ghoreishi 120 374 2002 10.1016/S0924-0136(01)01160-8 A comparative experimental study of machining characteristics in vibratory
Journal of Materials Processing Technology Zhang 129 45 2002 10.1016/S0924-0136(02)00573-3 Adaptive fuzzy logic control system of a servo mechanism for electro-discharge machining combined with ultrasonic vibration
CIRP Annals-Manufacturing Technology Egashira 48 131 1999 10.1016/S0007-8506(07)63148-5 Microultrasonic machining by the application of work piece vibration
Journal of Materials Processing Technology Gao 139 226 2003 10.1016/S0924-0136(03)00224-3 A study of ultrasonically aided micro-electrical-discharge machining by the application of work piece vibration
Gunawan Setia Prihandana, M. Hamdi, Y.S. Wong, Kimiyuki Mitsui, Effect of vibrated electrode in electrical discharge machining, Proceedings of the First International Conference and Seventh AUN/SEED-Net Fieldwise Seminar on Manufacturing and Material Processing, 14-15 March 2006, Kuala Lumpur, pp. 133-138 (ISBN:983-42876-0-7).
Journal of Manufacturing Science and Engineering Yu 126 727 2004 10.1115/1.1813482 Study of 3D micro-ultrasonic machining
10.1016/j.ijmachtools.2005.09.023 Q.H. Zhang, R. Du, J.H. Zhang, Q. Zhang, An investigation of ultrasonic-assisted electrical discharge machining in gas, International Journal of Machine Tools & Manufacture, DOI:10.1016/j.ijmachtools.2005.09.023.
Journal of Materials Processing Technology Zhang 7 381 2005 A theoretical model of surface roughness in ultrasonic assisted electrical discharge machining in gas
Journal of Materials Processing Technology Zhang 129 135 2002 10.1016/S0924-0136(02)00596-4 Ultrasonic vibration electrical discharge machining in gas
Journal of Materials Processing Technology Guo 69 212 1997 10.1016/S0924-0136(97)00021-6 Study on the machining mechanism of WEDM with ultrasonic vibration of the wire
McGeough 1998 Advanced Methods of Machining
Journal of Materials Processing Technology Yu 149 353 2004 10.1016/j.jmatprotec.2003.10.044 Dry electrical discharge machining of cemented carbide
CIRP Annals-Manufacturing Technology Kunieda 40 215 1991 10.1016/S0007-8506(07)61971-4 Improvement of EDM efficiency by supplying oxygen gas into gap
Electrical discharge machining in gas CIRP Annals-Manufacturing Technology Kunieda 46 143 1997 10.1016/S0007-8506(07)60794-X
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering Yoshida 65 689 1999 10.2493/jjspe.65.689 Study on mechanism for minute tool electrode wear in dry EDM
Y. Zhanbo, J. Takahashi, N. Nakajima, S. Sano, K. Karato, M. Kunieda, Feasibility of 3-D surface machining by dry EDM (〈http://www.sodic.co.jptechimgarticle_s02.pdf〉 Downloaded on May 1 2006).
L.Q. Li, W.S. Zhao, Z.L. Wang, B.Q. Kou, L.Y. Li Discussion of electrical discharge machining in gas, The 31st IEEE International Conference on Plasma Science 2004, ICOPS2004, ISBN: 0-7803-8334-6.
Journal of Materials Processing Technology Curodeau 149 278 2004 10.1016/j.jmatprotec.2003.10.040 Molds surface finishing with new EDM process in air with thermoplastic composite electrodes
Materials Science Forum Zhang 471-472 741 2004 10.4028/www.scientific.net/MSF.471-472.741 The mechanism of ultrasonic vibration improving MRR in UEDM in gas
CIRP Annals-Manufacturing Technology Kunieda 52 147 2003 10.1016/S0007-8506(07)60552-6 High speed 3D milling by dry EDM
CIRP Annals-Manufacturing Technology Kunieda 53 183 2004 10.1016/S0007-8506(07)60674-X Improvement of dry EDM characteristics using piezoelectric actuator
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering Furudate 67 1180 2001 10.2493/jjspe.67.1180 Fundamental study on dry-WEDM
Key Engineering Materials Wang 258-259 562 2004 10.4028/www.scientific.net/KEM.259-260.562 Dry WEDM for finish cut
CIRP Annals-Manufacturing Technology Kunieda 50 121 2001 10.1016/S0007-8506(07)62085-X High precision finish cutting by dry WEDM
〈http://www.scopus.com, checked on May 1 2006〉.
3D form generating processing by dry EDM (〈http://www.tuat.ac.jp/~kunieda/E-kenkyu/16E-kenkyu/3jigen%20(shibayama)/DRY-EDM%202004html〉). Downloaded on May 1 2006.
Dalian Ligong Daxue Xuebao/Journal of Dalian University of Technology Zhao 45 668 2005 Research on effecting mechanism of particles in powder-mixed EDM
International Journal of Machine Tools & Manufacture Pecas 43 1465 2003 10.1016/S0890-6955(03)00169-X Influence of silicon powder-mixed dielectric on conventional electrical discharge machining
Journal of Materials Processing Technology Yan Ming 52 44 1995 10.1016/0924-0136(94)01442-4 Powder-suspension dielectric fluid for EDM
Journal of Materials Processing Technology Wong 79 30 1998 10.1016/S0924-0136(97)00450-0 Near-mirror-finish phenomenon in EDM using powder-mixed dielectric
Materials Transactions Yan 42 2597 2001 10.2320/matertrans.42.2597 Surface modification of SKD 61 during EDM with metal powder in the dielectric
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering Furutani 67 2042 2001 10.2493/jjspe.67.2042 Deposition of lubricant layer by electrical discharge machining during finishing process
Materials Processing Technology Yih-fong 170 385 2005 10.1016/j.jmatprotec.2005.06.006 Investigation into some surface characteristics of electrical discharge machining SKD-11 using powder-suspension dielectric oil
Wear Jeswani 70 133 1981 10.1016/0043-1648(81)90148-4 Effect of the addition of graphite powder to kerosene used as the dielectric fluid in electrical discharge machining
Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch’eng Hsuebo Pao Yan 14 307 1993 Effects of dielectric with suspended aluminum powder on EDM
Journal of Material Processing Technology Zhao 129 30 2002 10.1016/S0924-0136(02)00570-8 The application of research on powder mixed EDM in rough machining
International Journal of Advanced Manufacturing Technology Tzeng 17 586 2001 10.1007/s001700170142 Effects of powder characteristics on electrodischarge machining efficiency
Journal of Materials Processing Technology Klocke 149 191 2004 10.1016/j.jmatprotec.2003.10.036 The effects of powder suspended dielectrics on the thermal influenced zone by electrodischarge machining with small discharge energies
International Journal of Machine Tools & Manufacture Wu 45 1195 2005 10.1016/j.ijmachtools.2004.12.005 Improvement of surface finish on SKD steel using electro-discharge machining with aluminum and surfactant added dielectric
S. Sharif, R.M.Y. Noordin, Machinability modeling in powder mixed dielectric EDM of titanium alloy Ti-6246, Proceedings of the First International Conference and Seventh AUN/SEED-Net Fieldwise Seminar on Manufacturing and Material Processing, 14-15 March 2006, Kuala Lumpur, pp. 133-138 (ISBN: 983-42876-0-7).
Journal of Materials Processing Technology Kansal 169 427 2005 10.1016/j.jmatprotec.2005.03.028 Parametric optimization of powder mixed electrical discharge machining by response surface methodology
Journal of the International Societies for Precision Engineering and Nanotechnology Furutani 25 138 2001 Accretion of titanium carbide by electrical discharge machining with powder suspended in working fluid
Journal of Materials Processing Technology Chow 101 95 2000 10.1016/S0924-0136(99)00458-6 Study of added powder in kerosene for the micro-slit machining of titanium alloy using electro-discharge machining
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture Kozak 217 1597 2003 10.1243/095440503771909971 Study of electrical discharge machining using powder-suspended working media
10.1007/s00170-006-0485-7 Y.C. Lin, H. M. Chow, B. H. Yan, H. J. Tzeng, Effects of finishing in abrasive fluid machining on microholes fabricated by EDM, International Journal of Advanced Manufacturing Technology, DOI:10.1007/s00170-006-0485-7.
Wear Jeswani 72 81 1981 10.1016/0043-1648(81)90285-4 Electrical discharge machining in distilled water
International Journal of Machine Tool Design and Research Tariq Jilani 24 31 1984 10.1016/0020-7357(84)90044-1 Experimetnal investigations into the performance of water as dielectric in EDM
American Society of Mechanical Engineers, Production Engineering Division (Publication) PED Konig 64 649 1993 Influence of the working medium on the removal process in EDM sinking
CIRP Annals-Manufacturing Technology Kruth 44 169 1995 10.1016/S0007-8506(07)62299-9 Study of the white layer of a surface machined by die-sinking electro-discharge machining
Journal of Materials Processing Technology Chen 87 107 1999 10.1016/S0924-0136(98)00340-9 Influence of kerosene and distilled water as dielectric on the electric discharge machining characteristics of Ti-6Al-4V
Machining Science and Technology Ekmekci 9 39 2005 10.1081/MST-200051244 Residual stress state and hardness depth in electric discharge machining: de-ionized water as dielectric liquid
New Diamond and Frontier Carbon Technology Sharma 15 181 2005 Potential of electrically conductive chemical vapor deposited diamond as an electrode for micro-electrical discharge machining in oil and water
Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science Ekmekci 36 117 2005 10.1007/s11663-005-0011-6 A comparative study on the surface integrity of plastic mold steel due to electric discharge machining
IEEE Transactions on Power Electronics Casanueva 20 361 2005 10.1109/TPEL.2004.842992 Analysis design and experimental results of a high-frequency power supply for spark erosion
Materials Science and Technology Kang 21 817 2005 10.1179/174328405X36601 Effect of electrical discharge machining process on crack susceptibility of nickel based heat resistant alloy
CIRP Annals-Manufacturing Technology Koenig 36 105 1987 10.1016/S0007-8506(07)62564-5 A aqueous solutions of organic compounds as dielectric for EDM sinking
Journal of Materials Processing Technology Leao 149 341 2004 10.1016/j.jmatprotec.2003.10.043 A review on the use of environmentally-friendly dielectric fluids in electrical discharge machining
International Journal of Machine Tools & Manufacture Yan 45 194 2005 10.1016/j.ijmachtools.2004.07.006 The effect in EDM of a dielectric of a urea solution in water on modifying the surface of titanium
CIRP Annals-Manufacturing Technology Levy 42 227 1993 10.1016/S0007-8506(07)62431-7 Environmentally friendly and high-capacity dielectric regeneration for wire EDM
D. Diane, Quality water for wire EDM, SME Technical Paper (Series) MR, Issue MR94-249 (1994) Pages MR94-249-1-8.
Mitsubishi Electric Advance Yoshiro 65 5 1993 Processing technologies and characteristics of wire-cut EDMs
Mitsubishi Electric Advance Takeshi 81 14 1997 Machining technologies for highly precise wire-cut electrical-discharge machines
VDI Berichte Minami 1405 503 1998 Coloring method of titanium alloy using EDM process
Wear Jeswani 55 153 1979 10.1016/0043-1648(79)90187-X Dimensional analysis of tool wear in electrical discharge machining
Journal of Physics D: Applied Physics Yahya 37 1467 2004 10.1088/0022-3727/37/10/008 Determination of material removal rate of an electro-discharge machine using dimensional analysis
International Journal of Machine Tools & Manufacture Tsai 41 1455 2001 10.1016/S0890-6955(01)00015-3 Semi-empirical model of surface finish on electrical discharge machining
Journal of Materials Processing Technology Wang 114 1 2001 10.1016/S0924-0136(01)00733-6 Semi-empirical model on work removal and tool wear in electrical discharge machining
Journal of Applied Physics DiBitonto 66 4095 1989 10.1063/1.343994 Theoretical models of the electrical discharge machining process. I. A simple cathode erosion model
Journal of Applied Physics Patel 66 4104 1989 10.1063/1.343995 Theoretical models of the electrical discharge machining process. II. The anode erosion model
Journal of Applied Physics Eubank 73 7900 1993 10.1063/1.353942 Theoretical models of the electrical discharge machining process. III. The variable mass, cylindrical plasma model
Journal of Materials Processing Technology McGeough 68 172 1997 10.1016/S0924-0136(96)00024-6 A theoretical model of electrodischarge texturing
Journal of the Faculty of Engineering and Architecture of Gazi University Cogˇun 19 97 2004 Experimental and theoretical investigation of workpiece surface profiles in electrical discharge machining (EDM)
Journal of Materials Processing Technology Perez 149 198 2004 10.1016/j.jmatprotec.2003.11.053 Theoretical modeling of energy balance in electroerosion
N.Y. Tantra, F. Leao, I.R. Pashby, Evaluating theoretical equations to predict wear in electro-discharge machining, Proceedings of the First International Conference and Seventh AUN/SEED-Net Fieldwise Seminar on Manufacturing and Material Processing, 14-15 March 2006, Kuala Lumpur, 151-155 (ISBN:983-42876-0-7).
Intelligent Engineering Systems Through Artificial Neural Networks Gopal 2 845 1992 Artificial Neural Network approach in modelling of EDM process
Journal of Materials Processing Technology Tsai 17 111 2001 10.1016/S0924-0136(01)01146-3 Comparisons of neural network models on material removal rate in electrical discharge machining
International Journal of Machine Tools & Manufacture Tsai 41 1385 2001 10.1016/S0890-6955(01)00028-1 Predictions on surface finish in electrical discharge machining based upon neural network models
International Journal of Machine Tools & Manufacture Wang 43 995 2003 10.1016/S0890-6955(03)00102-0 A hybrid intelligent method for modeling the EDM process
Materials and Manufacturing Processes Panda 20 645 2005 10.1081/AMP-200055033 Artificial neural network prediction of material removal rate in electro discharge machining
Precision Engineering Tariq Jilani 4 215 1982 10.1016/0141-6359(82)90011-3 Analysis and modeling of EDM parameters
Journal of Heat Transfer Pandit 105 555 1983 10.1115/1.3245621 Stochastic approach to thermal modeling applied to electro-discharge machining
VDI Berichte Altpeter 1405 149 1998 EDM modeling for control
Journal of Materials Processing Technology Petropoulos 155-156 1247 2004 10.1016/j.jmatprotec.2004.04.189 Modeling of surface finish in electro-discharge machining based upon statistical multi-parameter analysis
Journal of Materials Processing Technology Rajurkar 38 417 1993 10.1016/0924-0136(93)90214-Q Thermal modeling and on-line monitoring of wire-EDM
Journal of Materials Processing Technology Puri 141 231 2003 10.1016/S0924-0136(03)00280-2 Modelling and analysis of the wire-tool vibration in wire-cut EDM
International Journal of Advanced Manufacturing Technology Puri 25 301 2005 10.1007/s00170-003-2045-8 Modeling and analysis of white layer depth in a wire-cut EDM process through response surface methodology
International Journal of Advanced Manufacturing Technology Katz 25 923 2005 10.1007/s00170-003-2007-1 Analysis of micro-scale EDM process
Journal of Manufacturing Science and Engineering, Transactions of the ASME Dhanik 127 759 2005 10.1115/1.2034512 Modeling of a single resistance capacitance pulse discharge in micro-electro discharge machining
International Journal of Manufacturing Technology and Management Dhanik 7 157 2005 10.1504/IJMTM.2005.006829 Evolution of EDM process modelling and development towards modelling of the micro-EDM process
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.