다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
日本金屬學會誌 = Journal of the Japan Institute of Metals and Materials, v.71 no.9, 2007년, pp.815 - 821
上路 林太郎 (香川大学) , 土田 紀之 (工学) , 藤井 英俊 (部) , 金堂 大介 (兵庫県) , 国重 和俊 (立大工学)
AI-Helper
The effect of the grain size of TWIP (twinning induced plasticity) steel on both the strength and ductility in the quasi-static tensile test at room temperature was studied. 31%Mn-3%Al-3%Si steels were cold-rolled to a reduction in thickness of 88% and subsequently annealed at various temperatures...
J. Phys. O. Grässel, G. Frommeyer, 7 383 1997
Grässel, O, Krüger, L, Frommeyer, G, Meyer, L.W. High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development — properties — application. International journal of plasticity, vol.16, no.10, 1391-1409.
0025-5416 Mat. Sci. Eng. A O. Bouaziz and N. Guelton 319-321 246 2001 10.1016/S0921-5093(00)02019-0
0025-5416 Mat. Sci. Eng. A S. Allain, J.-P. Chateau, D. Dahmou 387-389 272 2004 10.1016/j.msea.2004.05.038
Vercammen, S., Blanpain, B., De Cooman, B.C., Wollants, P.. Cold rolling behaviour of an austenitic Fe–30Mn–3Al–3Si TWIP-steel: the importance of deformation twinning. Acta materialia, vol.52, no.7, 2005-2012.
Proc Phys. Soc. E. O. Hall B64 747 1951 10.1088/0370-1301/64/9/303
0031-8086 Phil. Mag. R. Armstrong, I. Codd, R. M. Douthw 7 45 1962 10.1080/14786436208201857
Acta Metall. R. A. Jago and N. Hansen 34 1711 1986 10.1016/0001-6160(86)90118-5
Acta Metall. N. Hansen 25 863 1977 10.1016/0001-6160(77)90171-7
Saito, Y., Utsunomiya, H., Tsuji, N., Sakai, T.. Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) process. Acta materialia, vol.47, no.2, 579-583.
Tsuji, N, Ito, Y, Saito, Y, Minamino, Y. Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing. Scripta materialia, vol.47, no.12, 893-899.
Huang, Xiaoxu, Hansen, Niels, Tsuji, Nobuhiro. Hardening by Annealing and Softening by Deformation in Nanostructured Metals. Science, vol.312, no.5771, 249-251.
Iwahashi, Y., Horita, Z., Nemoto, M., Langdon, T.G.. An investigation of microstructural evolution during equal-channel angular pressing. Acta materialia, vol.45, no.11, 4733-4741.
Furukawa, M., Horita, Z., Nemoto, M., Valiev, R.Z., Langdon, T.G.. Microhardness measurements and the Hall-Petch relationship in an AlMg alloy with submicrometer grain size. Acta materialia, vol.44, no.11, 4619-4629.
Philos. Trans. R. Soc. London F. J. Humphreys, P. B. Prangnell, J 357 1663 1999 10.1098/rsta.1999.0395
Adv. Eng. Mater. N. Tsuji, Y. Saito, S. H. Lee and Y 5 338 2003 10.1002/adem.200310077
0080-4614 Phil. Trans. R. Soc. Lond. N. Hansen and D. Juul Jensen A357 1447 1999
Ueji, R., Tsuji, N., Minamino, Y., Koizumi, Y.. Ultragrain refinement of plain low carbon steel by cold-rolling and annealing of martensite. Acta materialia, vol.50, no.16, 4177-4189.
0306-3453 Metal Science L.-Å. Norström 11 6 208 1977 10.1179/msc.1977.11.6.208
Chen, X.H., Lu, J., Lu, L., Lu, K.. Tensile properties of a nanocrystalline 316L austenitic stainless steel. Scripta materialia, vol.52, no.10, 1039-1044.
Di Schino, A., Kenny, J.M.. Grain refinement strengthening of a micro-crystalline high nitrogen austenitic stainless steel. Materials letters, vol.57, no.12, 1830-1834.
0022-7625 kouonkyoudo no zairyo kagaku K. Maruyama and H. Nakashima 27 1997
Chen, X.H., Lu, L.. Work hardening of ultrafine-grained copper with nanoscale twins. Scripta materialia, vol.57, no.2, 133-136.
Acta Metall. L. Remy 26 443 1978 10.1016/0001-6160(78)90170-0
Acta Metall. H. Mecking and U. F. Kocks 29 1865 1981 10.1016/0001-6160(81)90112-7
Scripta Metall. Z. Shen, R. H. Wagoner and W. A. T. 20 921 1986 10.1016/0036-9748(86)90467-9
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.