다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Journal of iron and steel research : international, v.16 no.1, 2009년, pp.22 - 26
YU, Hai-liang (The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, Liaoning, China) , LIU, Xiang-hua (The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, Liaoning, China) , CHEN, Li-qing (The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, Liaoning, China) , LI, Chang-sheng (The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, Liaoning, China) , ZHI, Ying (The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, Liaoning, China) , LI, Xin-wen (The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, Liaoning, China)
AI-Helper
Abstract Dimensions of one kind of stainless steel plate before finish rolling were obtained through analysis of the rough rolling processes by finite element method and updated geometrical method. The FE models of finish rolling process with a front edge roll were built, and influences of the...
BaoSteel Technology Z-l Ji 18 1 20 2000 JI Zhi-lei, SHI Rong-hua. Study on Formation Cause of Severe Cracked Edge of Stainless Steel Plate During Hot Continuous Rolling [J]. BaoSteel Technology, 2000, 18(1): 20 (in Chinese).
Journal of Plasticity Engineering H Liu 10 5 86 2003 LIU Hui, GAO Cai-ru, WANG Guo-dong, et al. Affection of Edger Shape on the Plate Profile [J]. Journal of Plasticity Engineering, 2003, 10(5): 86 (in Chinese).
J Mater Process Technol S-w Xiong 101 1 146 2000 XIONG Shang-wu, LIU Xiang-hua, WANG Guo-dong, et al. A Three-Dimensional Finite Element Simulation of the Vertical-Horizontal Rolling Process in the Width Reduction of Plate [J]. J Mater Process Technol, 2000, 101(1): 146.
J Mater Process Technol S-w Xiong 120 1-3 53 2002 XIONG Shang-wu, ZHENG Gui-fang, LIU Xiang-hua, et al. Analysis of the Non-Steady State Vertical-Horizontal Rolling Process in Roughing Trains by the Three-Dimensional Finite Element Method [J]. J Mater Process Technol, 2002, 120(1-3): 53.
J Mater Process Technol H-l Yu 180 1-3 323 2006 10.1016/j.jmatprotec.2006.07.012 YU Hai-liang, LIU Xiang-hua, ZHAO Xian-ming, et al. FEM Analysis for V-H Rolling Process by Updating Geometric Method [J]. J Mater Process Technol, 2006, 180(1-3): 323.
Iron and Steel H-l Yu 41 6 47 2006 YU Hai-liang, LIU Xiang-hua, LI Chang-sheng. Influence of Groove Fillet Radii of Edge Roll on Plate Deformation [J]. Iron and Steel, 2006, 41(6): 47 (in Chinese).
J Iron Steel Res Int H-l Yu 13 6 31 2006 10.1016/S1006-706X(06)60106-4 YU Hai-liang, LIU Xiang-hua, LI Chang-sheng, et al. Behavior of Transversal Crack on Plate Corner During V-H Rolling Processes [J]. J Iron Steel Res Int, 2006, 13(6): 31.
Journal of Northeastern University (Natural Science) H-l Yu 27 11 1228 2006 YU Hai-liang, LIU Xiang-hua, LI Chang-sheng, et al. Research on the Corner Stress of Dog-Bone Shaped Workpiece During Flat Spread Rolling [J]. Journal of Northeastern University (Natural Science), 2006, 27(11): 1228 (in Chinese).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 공개 리포지터리에 출판본, post-print, 또는 pre-print를 셀프 아카이빙 하여 자유로운 이용이 가능한 논문
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.