전 세계적으로 전력시스템의 고 효율화에 대한 요구가 증대됨에 따라 전력계통 시스템의 구조 개편이 한창이다. 특히 미래 지능형 사회에 적합한 전력시스템 개발을 위해서는 기존에 운영되어 왔던 DNP 3.0기반에서 벗어나IEC61850으로의 기술이전이 선행되어야 하나 막대한 투자비 및 현 운영되고 있는 전력시스템에 대한 운영안정성 등의 문제가 걸림돌로 작용하고 있다. 이에 기존 DNP기반 시스템과 신규 설치될 IEC61850기반 전력시스템간의 상호운영성 확보가 반드시 해결되어야 하며 이를 위해 상기 두 프로토콜 변환을 위한 게이트웨이를 설계하고자 한다. 이를 위해 게이트웨이는 DNP Master와 IEC61850 서버, 데이터 및 서비스 매핑 요소, SCL 구성요소로 구성되며, 전력설비 또는 관리 시스템으로부터 수신된 전력프로토콜을 설계된 데이터 및 서비스 매핑 테이블을 토대로 각 각의 전력자동화프로토콜로 변환을 수행할 수 있게 하였다. 이는 기존 DNP기반 전력시스템과 신규로 설치될 IEC61850 시스템과의 상호호환성을 확보할 수 있을 것으로 사료된다.
전 세계적으로 전력시스템의 고 효율화에 대한 요구가 증대됨에 따라 전력계통 시스템의 구조 개편이 한창이다. 특히 미래 지능형 사회에 적합한 전력시스템 개발을 위해서는 기존에 운영되어 왔던 DNP 3.0기반에서 벗어나IEC61850으로의 기술이전이 선행되어야 하나 막대한 투자비 및 현 운영되고 있는 전력시스템에 대한 운영안정성 등의 문제가 걸림돌로 작용하고 있다. 이에 기존 DNP기반 시스템과 신규 설치될 IEC61850기반 전력시스템간의 상호운영성 확보가 반드시 해결되어야 하며 이를 위해 상기 두 프로토콜 변환을 위한 게이트웨이를 설계하고자 한다. 이를 위해 게이트웨이는 DNP Master와 IEC61850 서버, 데이터 및 서비스 매핑 요소, SCL 구성요소로 구성되며, 전력설비 또는 관리 시스템으로부터 수신된 전력프로토콜을 설계된 데이터 및 서비스 매핑 테이블을 토대로 각 각의 전력자동화프로토콜로 변환을 수행할 수 있게 하였다. 이는 기존 DNP기반 전력시스템과 신규로 설치될 IEC61850 시스템과의 상호호환성을 확보할 수 있을 것으로 사료된다.
Due to load growth and environment problems, there is a growing need to modernize the distribution infrastructure with utilities. To satisfy with these requirements, combining DAS with IEC61850 should be positively necessary. However, an investment expense to replace the existing equipments based on...
Due to load growth and environment problems, there is a growing need to modernize the distribution infrastructure with utilities. To satisfy with these requirements, combining DAS with IEC61850 should be positively necessary. However, an investment expense to replace the existing equipments based on DNP 3.0 by the new one based on IEC 61850 and a problem of protocol compatibility between two equipments are the chief obstacles. In this paper, we present the design of a gateway acting as a protocol converter between DNP 3.0 and IEC61850 in Distribution Automation System. The proposed gateway is composed of DNP Master, IEC61850 Server, Mapping Table of Data and Service and SCL Configuration Element. Based on the designed mapping table, the gateway processes power information(DNP) received from power facility and transmits IEC61850 data to the monitoring system or acts inversely. It supports a protocol compatibility between the existing facility operated in DNP 3.0 and the new one working in IEC61850.
Due to load growth and environment problems, there is a growing need to modernize the distribution infrastructure with utilities. To satisfy with these requirements, combining DAS with IEC61850 should be positively necessary. However, an investment expense to replace the existing equipments based on DNP 3.0 by the new one based on IEC 61850 and a problem of protocol compatibility between two equipments are the chief obstacles. In this paper, we present the design of a gateway acting as a protocol converter between DNP 3.0 and IEC61850 in Distribution Automation System. The proposed gateway is composed of DNP Master, IEC61850 Server, Mapping Table of Data and Service and SCL Configuration Element. Based on the designed mapping table, the gateway processes power information(DNP) received from power facility and transmits IEC61850 data to the monitoring system or acts inversely. It supports a protocol compatibility between the existing facility operated in DNP 3.0 and the new one working in IEC61850.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.