최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Engineering structures, v.32 no.4, 2010년, pp.1123 - 1132
Martinelli, Paolo (Corresponding author. Tel.: +39 0223998785) , Mulas, Maria Gabriella (fax: +39 0223998771.)
AbstractA feasibility study is presented on the extension to reinforced concrete (RC) precast industrial buildings of a passive control technique aiming to provide additional damping to the structure and previously proposed for RC and steel framed structures. This technique, based on the insertion o...
Eng Struct Soong 24 3 243 2002 10.1016/S0141-0296(01)00092-X Supplemental energy dissipation: State-of-the-art and state-of-the practice
Soong 1997 Passive energy dissipation systems in structural engineering
Soong 35.1 2005 Handbook of structural engineering Passive energy dissipation and active control
Earthq Spectra Martinez Rueda 18 2 309 2002 10.1193/1.1494434 On the evolution of energy dissipation devices for seismic design
Eng Struct Martinez Rueda 17 5 359 1995 10.1016/0141-0296(95)00019-4 A novel technique for the retrofitting of reinforced concrete structures
Martinez Rueda JE. Energy dissipation devices for seismic upgrading of RC structures. Ph.D. dissertation. London (UK): Engineering Seismology and Earthquake Engineering, Civil Engineering Department, Imperial College; 1997
Martinez Rueda JE. Seismic redesign of RC frames by local incorporation of energy dissipation devices. In: Proceedings of the sixth US national conference on earthquake engineering. 1998
Mulas MG, Arcelaschi M, Martinez Rueda JE. Seismic redesign of steel frames by local insertion of dissipating devices. In: Mazzolani F., Tremblay R., editors. Behaviour of steel structures in seismic areas. Proceedings of the conference STESSA 2000. 2000. p. 415-8
Mulas MG, Martinez Rueda JE. Passive control in seismic retrofitting of steel MRFs. In: Proc. of 3rd world conference on structural control. Vol. 3, 2002. p. 223-34
Mata P, Barbat AH, Oller S, Boroschek R. Evaluation of the seismic behavior of precast concrete building with energy dissipating devices. In: First European conference on earthquake engineering and seismology. Geneva (Switzerland): Paper no: 652. 2006
Barbat 139 2007 Guidelines for seismic vulnerability reduction in the urban environment Seismic design and retrofit of structures using dissipative devices
Toniolo G. The seismic design of precast concrete structures in the New Eurocode 8. In: Proc. of the BIBM 17th International congress of precast concrete industry. 2002
EN 1992-1-1. Eurocode 2: Design of concrete structures-Part 1-1: General rules and rules for buildings. Bruxelles (Belgium): European Committee for Standardization; 2004
EN 1998-1. Eurocode 8: Design of structures for earthquake resistance-Part 1: General Rules, seismic actions and rules for buildings. Bruxelles (Belgium): European Committee for Standardization; 2005
Borsotti A, Discacciati G. Comportamento sismico di un edificio industriale prefabbricato con giunti dissipativi. M.Sc. thesis. Milano (Italy): Dipartimento di Ingegneria Strutturale, Politecnico di Milano; 2007 [in Italian]
PEER NGA Database. Pacific Earthquake Engineering Research Center: NGA Database. http://peer.berkeley.edu/nga/ [1 October 2009]
Earthq Eng Struct Dyn Perotti 20 5 409 1991 10.1002/eqe.4290200503 Concentrically braced steel frames under seismic actions: Non-linear behaviour and design coefficients
Earthq Spectra Cherry 9 3 447 1993 10.1193/1.1585724 Seismic response control of buildings using friction dampers
Earthq Spectra Nims 9 3 467 1993 10.1193/1.1585725 The use of the energy dissipating restraint for seismic hazard mitigation
Earthq Spectra Grigorian 9 3 491 1993 10.1193/1.1585726 Slotted bolted connection energy dissipators
McKenna F, Fenves GL, Scott MH. Open system for earthquake engineering simulation. Univ. of California. Berkeley, Calif. 2000. http://opensees.berkeley.edu [1 August 2009]
Earthq Eng Struct Dyn Spacone 25 7 711 1996 10.1002/(SICI)1096-9845(199607)25:7<711::AID-EQE576>3.0.CO;2-9 Fibre beam-column model for nonlinear analysis of r/c frames: Part I. Formulation
Earthq Eng Struct Dyn Spacone 25 7 727 1996 10.1002/(SICI)1096-9845(199607)25:7<727::AID-EQE577>3.0.CO;2-O Fibre beam-column model for nonlinear analysis of r/c frames: Part II. Applications
Earthq Eng Struct Dyn Martinelli 38 5 587 2009 10.1002/eqe.897 Simulation of shaking table tests of a seven-story shear wall building
J Struct Div Proc Amer Soc Civ Eng Kent 97 ST7 1969 1971 Flexural member with confined concrete
Menegotto M, Pinto P. Methods of analysis for cyclically loaded R/C frames. In: Proc. symp. resistance and ultimate deformability of structure acted by well defined repeated load 1973. IABSE
Filippou FC, Popov EP, Bertero VV. Effects of bond deterioration on hysteretic behavior of reinforced concrete joints. Technical Report EERC-83/19. Berkeley: Earthquake Engineering Research Center, University of California; 1983
Martinelli P. Shaking table tests on RC shear walls: Significance of numerical modeling. Ph.D. thesis. Milan (Italy): Department of Structural Engineering, Politecnico di Milano; 2007. http://opac.biblio.polimi.it/sebina/repository/link/oggetti_digitali/fullfiles/PERL-TDDE/TESI_D01868.PDF [1 August 2009]
Earthq Eng Struct Dyn Foti 27 6 543 1998 10.1002/(SICI)1096-9845(199806)27:6<543::AID-EQE733>3.0.CO;2-9 Numerical efficiency assessment of energy dissipators for seismic protection of buildings
Comput Struct De la Cruz 85 1-2 30 2007 10.1016/j.compstruc.2006.08.050 Numerical simulation of the seismic behavior of building structures equipped with friction energy dissipators
Externally bonded FRP reinforcement for RC structures. Bulletin no. 14. Fib CEB-FIP; 2001
Bommer JJ, Martinez-Pereira A. Strong motion parameters: Definition, usefulness and predictability. In: Proceedings of the twelfth world conference on earthquake engineering. 2000. p. 206
Bull Seismol Soc Amer Trifunac 65 3 581 1975 A study on the duration of strong earthquake ground motion
Arias 1970 Seismic design for nuclear power plants A measure of earthquake intensity
Whittaker 12.1 2004 Earthquake engineering: From engineering seismology to performance-based engineering Seismic energy dissipation systems for buildings
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.