[논문]Effect of Ductile Damage Evolution in Sheet Metal Forming: Experimental and Numerical Investigations

Abbassi, Fethi; Pantalé; , Olivier; Mistou, Sé; bastien; Zghal, Ali; Rakotomalala, Roger

doi:10.4028/www.scientific.net/kem.446.157

[해외논문] Effect of Ductile Damage Evolution in Sheet Metal Forming: Experimental and Numerical Investigations

Key engineering materials, v.446, 2010년, pp.157 - 169

Abbassi, Fethi (URMSSDT- ESST Tunis) , Pantalé, Olivier (Daher Aerospace) , Mistou, Sébastien (ENI de Tarbes) , Zghal, Ali (URMSSDT- ESST Tunis) , Rakotomalala, Roger (Université)

Abstract ▼ AI-Helper

The numerical simulation based on the Finite Element Method (FEM) is widely used in academic institutes and in the industry. It is a useful tool to predict many phenomena present in the classical manufacturing forming processes such as necking, fracture, springback, buckling and wrinkling. But, the results of such numerical model depend strongly on the parameters of the constitutive behavior model. In the first part of this work, we focus on the traditional identification of the constitutive law using oriented tensile tests (0°, 45°, and 90° with respect to the rolling direction). A Digital Image Correlation (DIC) method is used in order to measure the displacements on the surface of the specimen and to analyze the necking evolution and the instability along the shear band. Therefore, bulge tests involving a number of die shapes (circular and elliptic) were developed. In a second step, a mixed numerical-experimental method is used for the identification of the plastic behavior of the stainless steel metal sheet. The initial parameters of the inverse identification were extracted from a uniaxial tensile test. The optimization procedure uses a combination of a Monte-Carlo and a Levenberg-Marquardt algorithm. In the second part of this work, according to some results obtained by SEM (Scaning Electron Microscopy) of the crack zones on the tensile specimens, a Gurson Tvergaard Needleman (GTN) ductile model of damage has been selected for the numerical simulations. This model was introduced in order to give informations concerning crack initiations during hydroforming. At the end of the paper, experimental and numerical comparisons of sheet metal forming applications are presented and validate the proposed approach.

참고문헌 (16)

A. Andrade-Campos, S. Thuillier, P. Pilvin and F. Teixeira-Dias, On the determination of material parameters for internal variable thermoelastic-viscoplastic constitutive models, International Journal of Plasticity, vol. 23 (2007) 1349-1379. 10.1016/j.ijplas.2006.09.002

상세보기
J. L Chaboche.,. Continuous Damage Mechanics: a tool to describe phenomena before crack initiation. Nuclear Engineering and Design 64, (1981) 233-247. 10.1016/0029-5493(81)90007-8

상세보기
M. Brünig, Ricci S., Nonlocal continuum theory of anisotropically damaged metals. International Journal of Plasticity 21, (2005)1346-1382. 10.1016/j.ijplas.2004.06.006

상세보기
G. Rousselier, S. A. Leclercq, simplified polycrystalline model for viscoplastic and damage finite element analyses. International Journal of Plasticity vol. 22, (2006) 685-712. 10.1016/j.ijplas.2005.04.011

상세보기
C. Zhiying, D. Xianghuai, The GTN damage model based on Hill'48 anisotropic yield criterion and its application in sheet metal forming, Computational Materials Science 44 (2009) 1013- 1021. 10.1016/j.commatsci.2008.07.020

상세보기
A.L. Gurson, Continuum theory of ductile rupture by void nucleation and growth. I. Yield criteria and flow rules for porous ductile media, J. Eng. Mater. Technol. Vol. 99 (1977) 2-15. 10.2172/7351470
V. Tvergaard, A. Needleman, Analysis of the cup-cone fracture in a round tensile bar, Acta Metall. 32 (1) (1984) 157-169. 10.1016/0001-6160(84)90213-x

상세보기
D. Celentano, E Cabezas., C. Garcia and A. Monsalve, Characterization of the mechanical behaviour of materials in the tensile test: experiments and simulation. Modeling Simulation, Mater. Sci. Eng. Vol. 12 (2004) 425-444. Fracture zone. 10.1088/0965-0393/12/4/s09

상세보기
J.F. Michel, P. Picart, Size effects on the constitutive behaviour for brass in sheet metal forming, Journal of Materials Processing Technology 141 (2003) 439-446. 10.1016/s0924-0136(03)00570-3

상세보기
10.1007/BF02736172 P. Rui R. Cardoso, One Point quadrature shell elements for sheet metal forming analysis, Arch. Comput. Meth. Engng. Vol 12, (2005) 3-66.

상세보기
J.P. Kleinermann, J.P. Ponthot, Parameter identification and shape/process optimization in metal forming simulation, Journal of Materials Processing Technology 139 (2003) 521-526. 10.1016/s0924-0136(03)00530-2

상세보기
F. Abbassi, O. Pantalé, O. Dalverny, A. Zghal, and R. Rakotomalala Parametric sheet metal characterization by using Monte-Carlo and Levenberg-Marquardt: bulge test application" APCOM, 07 in conjunction with EPMESC XI, December 3-6, , Kyoto, JAPAN (2007).
F. ABBASSI, Fédération des connaissances de mise en forme dans une plateforme de prototypage virtuel. Thèse de Doctorat, Institut National Polytechnique de Toulouse, 12 Novembre (2008).
N. Benseddiq, A . Imad, A ductile fracture analysis using a local damage model, International Journal of Pressure Vessels and Piping vol 85, 219-227, (2008). 10.1016/j.ijpvp.2007.09.003

상세보기
G. Gutscher, H. C. Wu, G. Ngaile and T. Altan, Determination of flow stress for sheet metal forming using the viscous pressure bulge (VPB) test, Journal of Materials Processing Technology, Volume 146, Issue 1, (2004) 1-7. 10.1016/s0924-0136(03)00838-0

상세보기
10.51257/a-v1-m126 D. François., Techniques de l'Ingénieur - Essais mécaniques des métaux. Essais d'aptitude à la mise en forme,. M 125 07- (1984).

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

[해외논문] Effect of Ductile Damage Evolution in Sheet Metal Forming: Experimental and Numerical Investigations

Abstract ▼ AI-Helper

참고문헌 (16)

이 논문을 인용한 문헌

관련 콘텐츠

원문 URL 링크

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트