최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Progress in natural science : communication of state key laboratories of China, v.22 no.3, 2012년, pp.224 - 230
Shi, S. (Engineering Research Center of Advanced Glasses Manufacturing Technology, MOE, Donghua University, Shanghai 201620, PR China) , Zhang, Q. , Wang, H. , Li, Y.
The 3mol% yttria stabilized tetragonal zirconia polycrystals (3Y-TZP) powder had three particle size distributions, while the fine one was lower than 100nm. The 3Y-TZP compact was prepared by dry-pressing under pressures ranged from 10 to 30MPa and then presintered at 1250oC for 2h. The mat...
Journal of the American Ceramic Society Wolf 79 7 1769 1996 10.1111/j.1151-2916.1996.tb07994.x Mechanical properties and failure analysis-glass dental composite
Journal of the American Ceramic Society Wolf 76 10 1993 10.1111/j.1151-2916.1993.tb04004.x Melt-infiltration processing and fracture toughness of alumina-glass dental composite
Dental Materials Luo 18 3 216 2002 10.1016/S0109-5641(01)00026-4 Strength and fracture toughness of MgO-modified glass infiltrated alumina for CAD/CAM
M. Tyszblat, Process for the Preparation of a Dental Prosthesis by Slight Solid Phase Fritting of a Metal Oxide Based Infrastructure, United States Patent 4 772 436, 1987-04-10.
Journal of the California Dental Association Sorensen 26 3 207 1998 10.1080/19424396.1998.12221659 In-Ceram fixed partial dentures: three-year clinical trial results
Journal of the American Ceramic Society Lee 80 8 2141 1997 10.1111/j.1151-2916.1997.tb03100.x Shrinkage-free, alumina-glass dental composite via aluminium oxidation
Dental Materials Wang 23 9 1108 2007 10.1016/j.dental.2006.06.041 Shrinkage and strength characterization of an alumina-glass interpenetrating phase composite for dental use
Quintessence International Probster 23 1 25 1992 Slip-casting alumina ceramics for crown and bridge restorations
Journal of the American Ceramic Society Kim 82 11 3167 1999 10.1111/j.1151-2916.1999.tb02219.x Mechanical properties of tape-cast alumina-glass dental composite
Dental Materials Oh 23 4 442 2007 10.1016/j.dental.2006.02.015 Properties and cyclic fatigue of glass infiltrated tape cast alumina cores produced using a water-based solvent
Journal of Materials Science Lee 39 9 3141 2004 10.1023/B:JMSC.0000025844.84500.c3 Optical, mechanical properties and infiltration rate of spinel/zirconia-glass dental composite prepared by melt infiltration
Materials Science and Engineering A Lee 341 1-2 98 2003 10.1016/S0921-5093(02)00209-5 Effect of alumina particle size and distribution on infiltration rate and fracture toughness of alumina/glass composite prepared by melt infiltration
Journal of the European Ceramic Society Zhu 25 5 633 2005 10.1016/j.jeurceramsoc.2004.03.029 Near net-shape fabrication of alumina glass composite
The International Journal of Prosthodontics Magne 10 5 459 1997 Esthetic improvements and in vitro testing of in-ceram alumina and spinell ceramic
Journal of Dentistry Ersu 37 11 848 2009 10.1016/j.jdent.2009.06.017 Surface roughness and bond strengths of glass-infiltrated alumina-ceramics prepared using various surface treatments
Dental Materials Bona 24 11 1568 2008 10.1016/j.dental.2008.06.005 Characterization of glass-infiltrated alumina-based ceramics
Progress in Natural Science: Materials International Liu 21 1 53 2011 10.1016/S1002-0071(12)60025-2 Effect of TRT process on GFA, mechanical properties and microstructure of Zr-based bulk metallic glass
Dental Materials Bona 23 6 769 2007 10.1016/j.dental.2006.06.043 Characterization and surface treatment effects on topography of a glass-infiltrated alumina/zirconia-reinforced ceramic
Materials Letters Sheng 58 11 1750 2004 10.1016/j.matlet.2003.10.062 Preparation of glass-infiltrated 3Y-TZP/Al2O3/glass composite
Journal of Materials Processing Technology Balakrishnan 209 12-13 5271 2009 10.1016/j.jmatprotec.2009.03.014 Mechanical properties of MgO-Al2O3-SiO2 glass-infiltrated Al2O3-ZrO2 composite
Part II. zirconia-based dental ceramics, Dental Materials Guazzato 20 5 449 2004 Strength, fracture toughness and microstructure of a selection of all-ceramic materials
Progress in Natural Science: Materials International Peng 21 1 46 2011 10.1016/S1002-0071(12)60024-0 Micro-alloying of yttrium in Zr-based bulk metallic glasses
Materials Science and Engineering Kosmac 71 57 1985 10.1016/0025-5416(85)90206-X The role of tetragonal and monoclinic ZrO2 particles in the fracture toughness of Al2O3-ZrO2 composite
Progress in Natural Science: Materials International Shi 22 1 15 2012 10.1016/j.pnsc.2011.12.003 Fabrication of well-dispersive yttrium-stabilized cubic zirconia nanoparticles via vapor phase hydrolysis
Dental Materials Taskonak 24 5 700 2008 10.1016/j.dental.2007.08.001 Analysis of subcritical crack growth in dental ceramics using fracture mechanics and fractography
Materials Research Diego 10 1 47 2007 10.1590/S1516-14392007000100011 Characterization of ceramic powders used in the In-Ceram systems to fixed dental prosthesis
Journal of the American Ceramic Society Sarkar 90 2 523 2007 10.1111/j.1551-2916.2006.01380.x Is glass infiltration beneficial to improve fretting wear properties for alumina
Journal of the American Ceramic Society 62 (7-8) Lawn 347 1979 10.1111/j.1151-2916.1979.tb19075.x Hardness, toughness, and brittleness-indentation analysis
Journal of Dentistry Tsitrou 35 12 897 2007 10.1016/j.jdent.2007.07.002 Brittleness index of machinable dental materials and its relation to the marginal chipping factor
Journal of the American Ceramic Society Kuromitsu 80 6 1583 1997 10.1111/j.1151-2916.1997.tb03020.x Interaction between alumina and binary glasses
Progress in Natural Science: Materials International Wu 22 1 40 2012 10.1016/j.pnsc.2011.12.007 Evaluation of plasma sprayed YSZ thermal barrier coatings with the CMAS deposits infiltration using impedance spectroscopy
※ AI-Helper는 부적절한 답변을 할 수 있습니다.