[논문]Turbulent Flow in D-Type Corrugated Pipes: Flow Pattern and Friction Factor

Stel, H.; Franco, A. T.; Junqueira, S. L. M.; Erthal, R. H.; Mendes, R.; Gonç; alves, M. A. L.; Morales, R. E. M.

doi:10.1115/1.4007899

Turbulent Flow in D-Type Corrugated Pipes: Flow Pattern and Friction Factor

Journal of fluids engineering, v.134 no.12, 2012년, pp.121202 -

Stel, H. (Thermal Sciences Laboratory (LACIT), Federal University of Technology-Paraná) , Franco, A. T. ((UTFPR), CEP. 80230-901, Curitiba, PR, Brazil) , Junqueira, S. L. M. (TE) , Erthal, R. H. (Thermal Sciences Laboratory (LACIT), Federal University of Technology-Paraná) , Mendes, R. ((UTFPR), CEP. 80230-901, Curitiba, PR, Brazil e-mail:) , Gonçalves, M. A. L. , Morales, R. E. M.

Abstract ▼ AI-Helper

Turbulent flow in d-type corrugated pipes of various aspect ratios has been numerically investigated in terms of flow pattern and friction factor, for Reynolds numbers ranging from 5000 to 100,000. The present numerical model was verified by comparing the friction factor with experimental and numerical results from the literature. The numerical analysis suggested that d-type behavior exists for groove aspect ratios up to w/k = (groove width/rib height) = 2 independent of the pitch. However, for a ratio of w/k = 3 an important change in the flow pattern occurs so that the pressure drag exerted by the groove walls becomes important. It is shown that the friction factor is independent of the groove height as long as the flow is similar to a flow in a d-type corrugated pipe. Moreover, the friction factor curve for d-type pipes shows a logarithmic behavior as function of the Reynolds number, so that a simple method can be used to derive an expression for the friction factor as a function of the Reynolds number and the relative groove width only. The results may be useful to engineering projects that require a better prediction of the friction factor in d-type corrugated pipes.

참고문헌 (17)

J. Fluid Mech. 37 383 1969 10.1017/S0022112069000619 Rough Wall Turbulent Boundary Layers

상세보기
Phys. Fluids 19 125101 2007 10.1063/1.2821908 Properties of d- and k-Type Roughness in a Turbulent Channel Flow

상세보기
Annu. Rev. Fluid Mech. 36 173 2004 10.1146/annurev.fluid.36.050802.122103 Turbulent Flows Over Rough Walls

상세보기
Exp. Fluids 16 323 1994 10.1007/BF00195431 LDA Measurements in a Turbulent Boundary Layer Over a d-Type Rough Wall

상세보기
J. Fluid Mech. 395 4 271 1999 The Turbulent Boundary Layer Over Transverse Square Cavities
Exp. Fluids 35 325 2003 10.1007/s00348-003-0653-6 The Response of a Turbulent Boundary Layer to Different Shaped Transverse Grooves

상세보기
J. Fluid Mech. 561 4 113 2006 Analysis of the Flow and Mass Transfer Processes for the Incompressible Flow Past an Open Cavity With a Laminar and a Fully Turbulent Incoming Boundary Layer
ASME J. Fluids Eng. 132 7 071203 2010 10.1115/1.4002035 Numerical and Experimental Analysis of Turbulent Flow in Corrugated Pipes

상세보기
Perspectives in Turbulence Studies 1987 Turbulent Boundary Layer Development Over Rough Surfaces
Numer. Heat Transfer, Part A 51 1137 2007 10.1080/10407780601112829 Simulation of Turbulent Flow in a Ribbed Pipe Using Large Eddy Simulation

상세보기
1990 Comparison of Experiment With Calculations Using Curvature-Corrected Zero and Two-Equation Turbulence Models for a Two-Dimensional U-Duct
The PHOENICS Encyclopaedia - PHOENICS On-Line Information System CHAM 2012
1987 Computation of Turbulent Flows Using an Extended k-Epsilon Turbulence Closure Model
ASME J. Fluids Eng. 103 3 456 1981 10.1115/1.3240815 A Modified Form of the k-ε Model for Predicting Wall Turbulence

상세보기
ASME J. Heat Transfer 99 180 1977 10.1115/1.3450666 Fully Developed Flow and Heat Transfer in Ducts Having Streamwise-Periodic Variations of Cross-Sectional Area

상세보기
Numerical Heat Transfer and Fluid Flow 1980
J. ICE 11 133 1939 Turbulent Flow in Pipes, With Particular Reference to the Transition Region Between the Smooth and Rough Pipe Laws

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

Turbulent Flow in D-Type Corrugated Pipes: Flow Pattern and Friction Factor

Abstract ▼ AI-Helper

참고문헌 (17)

이 논문을 인용한 문헌

관련 콘텐츠

원문 URL 링크

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트