다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Powder technology, v.237, 2013년, pp.32 - 40
Shafiee Afarani, M. , Samimi, A. , Bahadori Yekta, E.
AI-Helper
Alumina powders were granulated in a prototype high shear mixer granulator as primary particles. The produced green granules were then sintered in an electric furnace. The sensitivity of the granule characteristics to the wet granulation parameters and sintering post-processing temperature was studi...
Chemical Engineering Science Realpe 63 1602 2008 10.1016/j.ces.2007.11.018 Growth kinetics and mechanism of wet granulation in a laboratory-scale high shear mixer: effect of initial polydispersity of particle size
Powder Technology Ramachandran 188 89 2008 10.1016/j.powtec.2008.04.013 Experimental studies on distributions of granule size, binder content and porosity in batch drum granulation: inferences on process modelling requirements and process sensitivities
Chemical Engineering Science Saleh 60 3763 2005 10.1016/j.ces.2005.02.006 Wet granulation in a batch high shear mixer
Powder Technology Iveson 117 3 2001 10.1016/S0032-5910(01)00313-8 Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review
European Journal of Pharmaceutical Sciences Schæfer 21 525 2004 10.1016/j.ejps.2003.12.002 Effects of powder particle size and binder viscosity on intergranular and intragranular particle size heterogeneity during high shear granulation
Powder Technology Tardos 94 245 1997 10.1016/S0032-5910(97)03321-4 Critical parameters and limiting conditions in binder granulation of fine powders
Industrial and Engineering Chemistry Process Design and Development Ouchiyama 14 286 1975 10.1021/i260055a016 The probability of coalescence in granulation kinetics
AAPS PharmSciTech Badawy 5 16 2004 10.1208/pt050338 Effect of starting material particle size on its agglomeration behavior in high shear wet granulation
Rahaman 365 2006 Ceramic Processing
Boch 203 2007 Ceramic Materials: Processes, Properties and Applications
Barsoum 336 2003 Fundamentals of ceramics
Chiang 421 1996 Physical Ceramics: Principles for Ceramic Science and Engineering
Powder Technology Samimi 143-144 97 2004 10.1016/j.powtec.2004.04.027 Analysis of impact damage of agglomerates: effect of impact angle
International Journal of Pharmaceutics Bouwman 290 1-2 129 2005 10.1016/j.ijpharm.2004.11.024 The effect of the amount of binder liquid on the granulation mechanism and structure of microcrystalline cellulose granules prepared by high shear granulation
Journal of the European Ceramic Society Falamaki 2 2285 2004 10.1016/S0955-2219(03)00643-5 Initial sintering stage pore growth mechanism applied to the manufacture of ceramic membrane supports
Advanced Powder Technology Rough 16 145 2005 10.1163/1568552053621704 Effect of solids formulation on the manufacture of high shear mixer agglomerates
Rahaman 42 2006 Ceramic Processing
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.